Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes this time are for the Qualcomm Snapdragon
  platforms.

  There are bug fixes for error handling in Qualcomm icc-bwmon,
  rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
  firmware driver and a missing initialization in the Arm ff-a firmware
  driver. The Qualcomm RPMh and EDAC drivers need some rework to work
  correctly on all supported chips.

  The DT fixes include:

   - i.MX8 fixes for gpio, pinmux and clock settings

   - ADS touchscreen gpio polarity settings in several machines

   - Address dtb warnings for caches, panel and input-enable properties
     on Qualcomm platforms

   - Incorrect data on qualcomm platforms fir SA8155P power domains,
     SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire

   - Remoteproc firmware paths are corrected for Sony Xperia 10 IV"

* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  firmware: arm_ffa: Set handle field to zero in memory descriptor
  ARM: dts: Fix erroneous ADS touchscreen polarities
  arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
  arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
  arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
  EDAC/qcom: Get rid of hardcoded register offsets
  EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
  arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
  dt-bindings: cache: qcom,llcc: Fix SM8550 description
  arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
  arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
  soc: qcom: rpmhpd: Add SA8155P power domains
  arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
  dt-bindings: power: qcom,rpmpd: Add SA8155P
  soc: qcom: Rename ice to qcom_ice to avoid module name conflict
  soc: qcom: rmtfs: Fix error code in probe()
  soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
  ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
  ARM: at91: pm: fix imbalanced reference counter for ethernet devices
  arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
  ...

Documentation/devicetree/bindings/cache/qcom,llcc.yaml

@@ -129,6 +129,7 @@ allOf:
               - qcom,sm8250-llcc
               - qcom,sm8350-llcc
               - qcom,sm8450-llcc
+              - qcom,sm8550-llcc
     then:
       properties:
         reg:

Documentation/devicetree/bindings/power/qcom,rpmpd.yaml

@@ -29,6 +29,7 @@ properties:
       - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
       - qcom,qdu1000-rpmhpd
+      - qcom,sa8155p-rpmhpd
       - qcom,sa8540p-rpmhpd
       - qcom,sa8775p-rpmhpd
       - qcom,sdm660-rpmpd

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -527,7 +527,7 @@ touchscreen@1 {
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <31 0>;
-		pendown-gpio = <&gpio1 31 0>;
+		pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;

arch/arm/boot/dts/at91-sama7g5ek.dts

@@ -792,7 +792,7 @@ &sdmmc2 {
 };
 
 &shdwc {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {

arch/arm/boot/dts/at91sam9261ek.dts

@@ -156,7 +156,7 @@ tsc2046@2 {
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
 					spi-max-frequency = <3000000>;
-					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>;
 
 					ti,x-min = /bits/ 16 <150>;
 					ti,x-max = /bits/ 16 <3830>;

arch/arm/boot/dts/imx7d-pico-hobbit.dts

@@ -64,7 +64,7 @@ ads7846@0 {
 		interrupt-parent = <&gpio2>;
 		interrupts = <7 0>;
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio2 7 0>;
+		pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_3p3v>;
 		ti,x-min = /bits/ 16 <0>;
 		ti,x-max = /bits/ 16 <4095>;

arch/arm/boot/dts/imx7d-sdb.dts

@@ -205,7 +205,7 @@ tsc2046@0 {
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
-		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
 		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};

arch/arm/boot/dts/omap3-cm-t3x.dtsi

@@ -227,7 +227,7 @@ ads7846@0 {
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;

arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi

@@ -54,7 +54,7 @@ ads7846@0 {
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;

arch/arm/boot/dts/omap3-lilly-a83x.dtsi

@@ -311,7 +311,7 @@ tsc2046@0 {
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;

arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi

@@ -149,7 +149,7 @@ ads7846@0 {
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;

arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi

@@ -160,7 +160,7 @@ ads7846@0 {
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;

arch/arm/boot/dts/omap3-pandora-common.dtsi

@@ -651,7 +651,7 @@ tsc2046@0 {
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 IRQ_TYPE_NONE>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;

arch/arm/boot/dts/omap5-cm-t54.dts

@@ -354,7 +354,7 @@ ads7846@0 {
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;

arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts

@@ -268,7 +268,6 @@ bluetooth_default_state: bluetooth-default-state {
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
@@ -276,7 +275,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {

arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts

@@ -352,7 +352,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {

arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts

@@ -307,7 +307,6 @@ bluetooth_default_state: bluetooth-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	touch_pins: touch-state {
@@ -317,7 +316,6 @@ irq-pins {
 
 			drive-strength = <8>;
 			bias-pull-down;
-			input-enable;
 		};
 
 		reset-pins {
@@ -335,7 +333,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -83,6 +83,7 @@ CPU3: cpu@3 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 
 		idle-states {

arch/arm/boot/dts/qcom-apq8084.dtsi

@@ -74,6 +74,7 @@ cpu@3 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			qcom,saw = <&saw_l2>;
 		};
 

arch/arm/boot/dts/qcom-ipq4019.dtsi

@@ -102,6 +102,7 @@ cpu@3 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			qcom,saw = <&saw_l2>;
 		};
 	};

arch/arm/boot/dts/qcom-ipq8064.dtsi

@@ -45,6 +45,7 @@ cpu1: cpu@1 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts

@@ -49,7 +49,6 @@ gpioext1_pins: gpioext1-state {
 		gpioext1-pins {
 			pins = "gpio2";
 			function = "gpio";
-			input-enable;
 			bias-disable;
 		};
 	};

arch/arm/boot/dts/qcom-msm8660.dtsi

@@ -36,6 +36,7 @@ cpu@1 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm/boot/dts/qcom-msm8960.dtsi

@@ -42,6 +42,7 @@ cpu@1 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts

@@ -592,7 +592,6 @@ mpu6515_pin: mpu6515-state {
 		pins = "gpio73";
 		function = "gpio";
 		bias-disable;
-		input-enable;
 	};
 
 	touch_pin: touch-state {
@@ -602,7 +601,6 @@ int-pins {
 
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {

arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi

@@ -433,7 +433,6 @@ ts_int_pin: touch-int-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	sdc1_on: sdc1-on-state {

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -80,6 +80,7 @@ CPU3: cpu@3 {
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 			qcom,saw = <&saw_l2>;
 		};
 

arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts

@@ -461,7 +461,6 @@ int-pins {
 			function = "gpio";
 			drive-strength = <2>;
 			bias-disable;
-			input-enable;
 		};
 
 		reset-pins {

arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts

@@ -704,7 +704,6 @@ hostwake-pins {
 			pins = "gpio75";
 			function = "gpio";
 			drive-strength = <16>;
-			input-enable;
 		};
 
 		devwake-pins {
@@ -760,14 +759,12 @@ cmd-data-pins {
 	i2c_touchkey_pins: i2c-touchkey-state {
 		pins = "gpio95", "gpio96";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
 	i2c_led_gpioex_pins: i2c-led-gpioex-state {
 		pins = "gpio120", "gpio121";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 
@@ -781,7 +778,6 @@ gpioex_pin: gpioex-state {
 	wifi_pin: wifi-state {
 		pins = "gpio92";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 

arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts

@@ -631,7 +631,6 @@ ts_int_pin: ts-int-pin-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	bt_host_wake_pin: bt-host-wake-state {

arch/arm/mach-at91/pm.c

@@ -334,16 +334,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
 		pdev = of_find_device_by_node(eth->np);
 		if (!pdev)
 			return false;
+		/* put_device(eth->dev) is called at the end of suspend. */
 		eth->dev = &pdev->dev;
 	}
 
 	/* No quirks if device isn't a wakeup source. */
-	if (!device_may_wakeup(eth->dev)) {
-		put_device(eth->dev);
+	if (!device_may_wakeup(eth->dev))
 		return false;
-	}
 
-	/* put_device(eth->dev) is called at the end of suspend. */
 	return true;
 }
 
@@ -439,14 +437,14 @@ static int at91_pm_config_quirks(bool suspend)
 				pr_err("AT91: PM: failed to enable %s clocks\n",
 				       j == AT91_PM_G_ETH ? "geth" : "eth");
 			}
-		} else {
-			/*
-			 * Release the reference to eth->dev taken in
-			 * at91_pm_eth_quirk_is_valid().
-			 */
-			put_device(eth->dev);
-			eth->dev = NULL;
 		}
+
+		/*
+		 * Release the reference to eth->dev taken in
+		 * at91_pm_eth_quirk_is_valid().
+		 */
+		put_device(eth->dev);
+		eth->dev = NULL;
 	}
 
 	return ret;

arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

@@ -90,6 +90,8 @@ lpuart0: serial@5a060000 {
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
 		status = "disabled";
 	};
@@ -100,6 +102,8 @@ lpuart1: serial@5a070000 {
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
 		status = "disabled";
 	};
@@ -110,6 +114,8 @@ lpuart2: serial@5a080000 {
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
 		status = "disabled";
 	};
@@ -120,6 +126,8 @@ lpuart3: serial@5a090000 {
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi

@@ -81,7 +81,7 @@ sound {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_espi2>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeprom@0 {
@@ -202,7 +202,7 @@ pinctrl_espi2: espi2grp {
 			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
 			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
 			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8qm-mek.dts

@@ -82,8 +82,8 @@ &usdhc2 {
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
-	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/ipq5332.dtsi

@@ -73,6 +73,7 @@ CPU3: cpu@3 {
 		L2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/ipq6018.dtsi

@@ -83,7 +83,8 @@ CPU3: cpu@3 {
 
 		L2_0: l2-cache {
 			compatible = "cache";
-			cache-level = <0x2>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -66,7 +66,8 @@ CPU3: cpu@3 {
 
 		L2_0: l2-cache {
 			compatible = "cache";
-			cache-level = <0x2>;
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/ipq9574.dtsi

@@ -72,6 +72,7 @@ CPU3: cpu@3 {
 		L2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -180,6 +180,7 @@ CPU3: cpu@3 {
 		L2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 
 		idle-states {

arch/arm64/boot/dts/qcom/msm8953.dtsi

@@ -153,11 +153,13 @@ core3 {
 		L2_0: l2-cache-0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 
 		L2_1: l2-cache-1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/msm8976.dtsi

@@ -193,11 +193,13 @@ big_cpu_sleep_1: cpu-sleep-1-1 {
 		l2_0: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 
 		l2_1: l2-cache1 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 

arch/arm64/boot/dts/qcom/msm8994.dtsi

@@ -52,6 +52,7 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -88,6 +89,7 @@ CPU4: cpu@100 {
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -53,8 +53,9 @@ CPU0: cpu@0 {
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -83,8 +84,9 @@ CPU2: cpu@100 {
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -146,6 +146,7 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -190,6 +191,7 @@ CPU4: cpu@100 {
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/qcm2290.dtsi

@@ -51,6 +51,7 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/qcs404.dtsi

@@ -95,6 +95,7 @@ CPU3: cpu@103 {
 		L2_0: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 
 		idle-states {

arch/arm64/boot/dts/qcom/qdu1000.dtsi

@@ -35,9 +35,13 @@ CPU0: cpu@0 {
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -54,6 +58,8 @@ CPU1: cpu@100 {
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -70,6 +76,8 @@ CPU2: cpu@200 {
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -86,6 +94,8 @@ CPU3: cpu@300 {
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -7,7 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "sm8150.dtsi"
+#include "sa8155p.dtsi"
 #include "pmm8155au_1.dtsi"
 #include "pmm8155au_2.dtsi"
 

arch/arm64/boot/dts/qcom/sa8155p.dtsi

+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ *
+ * SA8155P is an automotive variant of SM8150, with some minor changes.
+ * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone,
+ * though the cmd-db doesn't reflect that and access attemps result in a bite.
+ */
+
+#include "sm8150.dtsi"
+
+&dispcc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi0 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi1 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_mdp {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&remoteproc_slpi {
+	power-domains = <&rpmhpd SA8155P_CX>,
+			<&rpmhpd SA8155P_MX>;
+};
+
+&rpmhpd {
+	/*
+	 * The bindings were crafted such that SA8155P PDs match their
+	 * SM8150 counterparts to make it more maintainable and only
+	 * necessitate adjusting entries that actually differ
+	 */
+	compatible = "qcom,sa8155p-rpmhpd";
+};

arch/arm64/boot/dts/qcom/sa8775p.dtsi

@@ -42,9 +42,13 @@ CPU0: cpu@0 {
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -58,6 +62,8 @@ CPU1: cpu@100 {
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -71,6 +77,8 @@ CPU2: cpu@200 {
 			next-level-cache = <&L2_2>;
 			L2_2: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -84,6 +92,8 @@ CPU3: cpu@300 {
 			next-level-cache = <&L2_3>;
 			L2_3: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -97,9 +107,13 @@ CPU4: cpu@10000 {
 			next-level-cache = <&L2_4>;
 			L2_4: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_1>;
 				L3_1: l3-cache {
 					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 
 			};
@@ -114,6 +128,8 @@ CPU5: cpu@10100 {
 			next-level-cache = <&L2_5>;
 			L2_5: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_1>;
 			};
 		};
@@ -127,6 +143,8 @@ CPU6: cpu@10200 {
 			next-level-cache = <&L2_6>;
 			L2_6: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_1>;
 			};
 		};
@@ -140,6 +158,8 @@ CPU7: cpu@10300 {
 			next-level-cache = <&L2_7>;
 			L2_7: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_1>;
 			};
 		};

arch/arm64/boot/dts/qcom/sc7180-lite.dtsi

@@ -16,3 +16,11 @@ &cpu6_opp11 {
 &cpu6_opp12 {
 	opp-peak-kBps = <8532000 23347200>;
 };
+
+&cpu6_opp13 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp14 {
+	opp-peak-kBps = <8532000 23347200>;
+};

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -92,10 +92,12 @@ &LITTLE_CPU_SLEEP_1
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -120,6 +122,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -144,6 +147,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -168,6 +172,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -192,6 +197,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -216,6 +222,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -240,6 +247,7 @@ &BIG_CPU_SLEEP_1
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -264,6 +272,7 @@ &BIG_CPU_SLEEP_1
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -480,7 +480,6 @@ &swr0 {
 	wcd_rx: codec@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
-		#sound-dai-cells = <1>;
 		qcom,rx-port-mapping = <1 2 3 4 5>;
 	};
 };
@@ -491,7 +490,6 @@ &swr1 {
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		#sound-dai-cells = <1>;
 		qcom,tx-port-mapping = <1 2 3 4>;
 	};
 };

arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi

@@ -414,7 +414,6 @@ &swr0 {
 	wcd_rx: codec@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
-		#sound-dai-cells = <1>;
 		qcom,rx-port-mapping = <1 2 3 4 5>;
 	};
 };
@@ -423,7 +422,6 @@ &swr1 {
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		#sound-dai-cells = <1>;
 		qcom,tx-port-mapping = <1 2 3 4>;
 	};
 };

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -182,10 +182,12 @@ &LITTLE_CPU_SLEEP_1
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -208,6 +210,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -230,6 +233,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -252,6 +256,7 @@ &LITTLE_CPU_SLEEP_1
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -274,6 +279,7 @@ &BIG_CPU_SLEEP_1
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -296,6 +302,7 @@ &BIG_CPU_SLEEP_1
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -318,6 +325,7 @@ &BIG_CPU_SLEEP_1
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -340,6 +348,7 @@ &BIG_CPU_SLEEP_1
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -58,10 +58,12 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
-				      cache-level = <3>;
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -83,6 +85,7 @@ CPU1: cpu@100 {
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -104,6 +107,7 @@ CPU2: cpu@200 {
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -125,6 +129,7 @@ CPU3: cpu@300 {
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -146,6 +151,7 @@ CPU4: cpu@400 {
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -167,6 +173,7 @@ CPU5: cpu@500 {
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -188,6 +195,7 @@ CPU6: cpu@600 {
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -209,6 +217,7 @@ CPU7: cpu@700 {
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -2726,6 +2735,7 @@ data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
+					input-enable;
 				};
 			};
 
@@ -2743,6 +2753,7 @@ data-pins {
 					function = "dmic1_data";
 					drive-strength = <2>;
 					bias-pull-down;
+					input-enable;
 				};
 			};
 
@@ -2758,6 +2769,7 @@ data-pins {
 					pins = "gpio9";
 					function = "dmic2_data";
 					drive-strength = <8>;
+					input-enable;
 				};
 			};
 
@@ -2775,6 +2787,7 @@ data-pins {
 					function = "dmic2_data";
 					drive-strength = <2>;
 					bias-pull-down;
+					input-enable;
 				};
 			};
 
@@ -3982,6 +3995,7 @@ apps_rsc: rsc@18200000 {
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
 			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";

arch/arm64/boot/dts/qcom/sdm630.dtsi

@@ -63,6 +63,7 @@ &PERF_CLUSTER_SLEEP_1
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -127,6 +128,7 @@ &PWR_CLUSTER_SLEEP_1
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sdm670.dtsi

@@ -41,8 +41,12 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
+				cache-level = <2>;
+				cache-unified;
 				L3_0: l3-cache {
-				      compatible = "cache";
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -57,6 +61,8 @@ CPU1: cpu@100 {
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -71,6 +77,8 @@ CPU2: cpu@200 {
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -85,6 +93,8 @@ CPU3: cpu@300 {
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -99,6 +109,8 @@ CPU4: cpu@400 {
 			next-level-cache = <&L2_400>;
 			L2_400: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -113,6 +125,8 @@ CPU5: cpu@500 {
 			next-level-cache = <&L2_500>;
 			L2_500: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -127,6 +141,8 @@ CPU6: cpu@600 {
 			next-level-cache = <&L2_600>;
 			L2_600: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -141,6 +157,8 @@ CPU7: cpu@700 {
 			next-level-cache = <&L2_700>;
 			L2_700: l2-cache {
 				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -108,10 +108,12 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
-				      cache-level = <3>;
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -135,6 +137,7 @@ CPU1: cpu@100 {
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -158,6 +161,7 @@ CPU2: cpu@200 {
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -181,6 +185,7 @@ CPU3: cpu@300 {
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -204,6 +209,7 @@ CPU4: cpu@400 {
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -227,6 +233,7 @@ CPU5: cpu@500 {
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -250,6 +257,7 @@ CPU6: cpu@600 {
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -273,6 +281,7 @@ CPU7: cpu@700 {
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -50,6 +50,7 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -102,6 +103,7 @@ CPU4: cpu@100 {
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm6125.dtsi

@@ -47,6 +47,7 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 
@@ -87,6 +88,7 @@ CPU4: cpu@100 {
 			L2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -60,10 +60,12 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -86,6 +88,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -108,6 +111,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -130,6 +134,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -152,6 +157,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -174,6 +180,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -196,6 +203,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -218,6 +226,7 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts

@@ -178,12 +178,12 @@ &qupv3_id_1 {
 };
 
 &remoteproc_adsp {
-	firmware-name = "qcom/Sony/murray/adsp.mbn";
+	firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
 	status = "okay";
 };
 
 &remoteproc_cdsp {
-	firmware-name = "qcom/Sony/murray/cdsp.mbn";
+	firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/sm6375.dtsi

@@ -48,10 +48,14 @@ CPU0: cpu@0 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -68,8 +72,10 @@ CPU1: cpu@100 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -85,8 +91,10 @@ CPU2: cpu@200 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -102,8 +110,10 @@ CPU3: cpu@300 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -119,8 +129,10 @@ CPU4: cpu@400 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -136,8 +148,10 @@ CPU5: cpu@500 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -153,8 +167,10 @@ CPU6: cpu@600 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -170,8 +186,10 @@ CPU7: cpu@700 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
-			      compatible = "cache";
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -63,10 +63,12 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
-				      cache-level = <3>;
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -90,6 +92,7 @@ CPU1: cpu@100 {
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -113,6 +116,7 @@ CPU2: cpu@200 {
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -136,6 +140,7 @@ CPU3: cpu@300 {
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -159,6 +164,7 @@ CPU4: cpu@400 {
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -182,6 +188,7 @@ CPU5: cpu@500 {
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -205,6 +212,7 @@ CPU6: cpu@600 {
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -228,6 +236,7 @@ CPU7: cpu@700 {
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};

arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts

@@ -13,6 +13,6 @@ / {
 };
 
 &display_panel {
-	compatible = "xiaomi,elish-boe-nt36523";
+	compatible = "xiaomi,elish-boe-nt36523", "novatek,nt36523";
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts

@@ -13,6 +13,6 @@ / {
 };
 
 &display_panel {
-	compatible = "xiaomi,elish-csot-nt36523";
+	compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -58,12 +58,14 @@ CPU0: cpu@0 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
-				      cache-level = <3>;
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -80,9 +82,10 @@ CPU1: cpu@100 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -98,9 +101,10 @@ CPU2: cpu@200 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -116,9 +120,10 @@ CPU3: cpu@300 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -134,9 +139,10 @@ CPU4: cpu@400 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -152,9 +158,10 @@ CPU5: cpu@500 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -170,9 +177,10 @@ CPU6: cpu@600 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -188,9 +196,10 @@ CPU7: cpu@700 {
 			power-domain-names = "psci";
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -57,12 +57,14 @@ CPU0: cpu@0 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
-				      compatible = "cache";
-				      cache-level = <3>;
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -79,9 +81,10 @@ CPU1: cpu@100 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -97,9 +100,10 @@ CPU2: cpu@200 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -115,9 +119,10 @@ CPU3: cpu@300 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -133,9 +138,10 @@ CPU4: cpu@400 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -151,9 +157,10 @@ CPU5: cpu@500 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -169,9 +176,10 @@ CPU6: cpu@600 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 
@@ -187,9 +195,10 @@ CPU7: cpu@700 {
 			#cooling-cells = <2>;
 			clocks = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			      next-level-cache = <&L3_0>;
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
 			};
 		};
 

arch/arm64/boot/dts/qcom/sm8550.dtsi

@@ -80,10 +80,12 @@ CPU0: cpu@0 {
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 				L3_0: l3-cache {
 					compatible = "cache";
 					cache-level = <3>;
+					cache-unified;
 				};
 			};
 		};
@@ -104,6 +106,7 @@ CPU1: cpu@100 {
 			L2_100: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -124,6 +127,7 @@ CPU2: cpu@200 {
 			L2_200: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -144,6 +148,7 @@ CPU3: cpu@300 {
 			L2_300: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -164,6 +169,7 @@ CPU4: cpu@400 {
 			L2_400: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -184,6 +190,7 @@ CPU5: cpu@500 {
 			L2_500: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -204,6 +211,7 @@ CPU6: cpu@600 {
 			L2_600: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -224,6 +232,7 @@ CPU7: cpu@700 {
 			L2_700: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
+				cache-unified;
 				next-level-cache = <&L3_0>;
 			};
 		};
@@ -2022,7 +2031,7 @@ swr3: soundwire-controller@6ab0000 {
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
-			qcom,ports-sinterval =		<0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
 			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
@@ -2068,7 +2077,7 @@ swr1: soundwire-controller@6ad0000 {
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <10>;
 
-			qcom,ports-sinterval =		<0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
@@ -2133,7 +2142,7 @@ swr0: soundwire-controller@6b10000 {
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
-			qcom,ports-sinterval =		<0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
 			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
@@ -3762,9 +3771,16 @@ gem_noc: interconnect@24100000 {
 
 		system-cache-controller@25000000 {
 			compatible = "qcom,sm8550-llcc";
-			reg = <0 0x25000000 0 0x800000>,
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
 			      <0 0x25800000 0 0x200000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

drivers/edac/qcom_edac.c

@@ -21,30 +21,9 @@
 #define TRP_SYN_REG_CNT                 6
 #define DRP_SYN_REG_CNT                 8
 
-#define LLCC_COMMON_STATUS0             0x0003000c
 #define LLCC_LB_CNT_MASK                GENMASK(31, 28)
 #define LLCC_LB_CNT_SHIFT               28
 
-/* Single & double bit syndrome register offsets */
-#define TRP_ECC_SB_ERR_SYN0             0x0002304c
-#define TRP_ECC_DB_ERR_SYN0             0x00020370
-#define DRP_ECC_SB_ERR_SYN0             0x0004204c
-#define DRP_ECC_DB_ERR_SYN0             0x00042070
-
-/* Error register offsets */
-#define TRP_ECC_ERROR_STATUS1           0x00020348
-#define TRP_ECC_ERROR_STATUS0           0x00020344
-#define DRP_ECC_ERROR_STATUS1           0x00042048
-#define DRP_ECC_ERROR_STATUS0           0x00042044
-
-/* TRP, DRP interrupt register offsets */
-#define DRP_INTERRUPT_STATUS            0x00041000
-#define TRP_INTERRUPT_0_STATUS          0x00020480
-#define DRP_INTERRUPT_CLEAR             0x00041008
-#define DRP_ECC_ERROR_CNTR_CLEAR        0x00040004
-#define TRP_INTERRUPT_0_CLEAR           0x00020484
-#define TRP_ECC_ERROR_CNTR_CLEAR        0x00020440
-
 /* Mask and shift macros */
 #define ECC_DB_ERR_COUNT_MASK           GENMASK(4, 0)
 #define ECC_DB_ERR_WAYS_MASK            GENMASK(31, 16)
@@ -60,15 +39,6 @@
 #define DRP_TRP_INT_CLEAR               GENMASK(1, 0)
 #define DRP_TRP_CNT_CLEAR               GENMASK(1, 0)
 
-/* Config registers offsets*/
-#define DRP_ECC_ERROR_CFG               0x00040000
-
-/* Tag RAM, Data RAM interrupt register offsets */
-#define CMN_INTERRUPT_0_ENABLE          0x0003001c
-#define CMN_INTERRUPT_2_ENABLE          0x0003003c
-#define TRP_INTERRUPT_0_ENABLE          0x00020488
-#define DRP_INTERRUPT_ENABLE            0x0004100c
-
 #define SB_ERROR_THRESHOLD              0x1
 #define SB_ERROR_THRESHOLD_SHIFT        24
 #define SB_DB_TRP_INTERRUPT_ENABLE      0x3
@@ -88,9 +58,6 @@ enum {
 static const struct llcc_edac_reg_data edac_reg_data[] = {
 	[LLCC_DRAM_CE] = {
 		.name = "DRAM Single-bit",
-		.synd_reg = DRP_ECC_SB_ERR_SYN0,
-		.count_status_reg = DRP_ECC_ERROR_STATUS1,
-		.ways_status_reg = DRP_ECC_ERROR_STATUS0,
 		.reg_cnt = DRP_SYN_REG_CNT,
 		.count_mask = ECC_SB_ERR_COUNT_MASK,
 		.ways_mask = ECC_SB_ERR_WAYS_MASK,
@@ -98,9 +65,6 @@ static const struct llcc_edac_reg_data edac_reg_data[] = {
 	},
 	[LLCC_DRAM_UE] = {
 		.name = "DRAM Double-bit",
-		.synd_reg = DRP_ECC_DB_ERR_SYN0,
-		.count_status_reg = DRP_ECC_ERROR_STATUS1,
-		.ways_status_reg = DRP_ECC_ERROR_STATUS0,
 		.reg_cnt = DRP_SYN_REG_CNT,
 		.count_mask = ECC_DB_ERR_COUNT_MASK,
 		.ways_mask = ECC_DB_ERR_WAYS_MASK,
@@ -108,9 +72,6 @@ static const struct llcc_edac_reg_data edac_reg_data[] = {
 	},
 	[LLCC_TRAM_CE] = {
 		.name = "TRAM Single-bit",
-		.synd_reg = TRP_ECC_SB_ERR_SYN0,
-		.count_status_reg = TRP_ECC_ERROR_STATUS1,
-		.ways_status_reg = TRP_ECC_ERROR_STATUS0,
 		.reg_cnt = TRP_SYN_REG_CNT,
 		.count_mask = ECC_SB_ERR_COUNT_MASK,
 		.ways_mask = ECC_SB_ERR_WAYS_MASK,
@@ -118,9 +79,6 @@ static const struct llcc_edac_reg_data edac_reg_data[] = {
 	},
 	[LLCC_TRAM_UE] = {
 		.name = "TRAM Double-bit",
-		.synd_reg = TRP_ECC_DB_ERR_SYN0,
-		.count_status_reg = TRP_ECC_ERROR_STATUS1,
-		.ways_status_reg = TRP_ECC_ERROR_STATUS0,
 		.reg_cnt = TRP_SYN_REG_CNT,
 		.count_mask = ECC_DB_ERR_COUNT_MASK,
 		.ways_mask = ECC_DB_ERR_WAYS_MASK,
@@ -128,7 +86,7 @@ static const struct llcc_edac_reg_data edac_reg_data[] = {
 	},
 };
 
-static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
+static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_bcast_regmap)
 {
 	u32 sb_err_threshold;
 	int ret;
@@ -137,31 +95,31 @@ static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
 	 * Configure interrupt enable registers such that Tag, Data RAM related
 	 * interrupts are propagated to interrupt controller for servicing
 	 */
-	ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
+	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
 				 TRP0_INTERRUPT_ENABLE,
 				 TRP0_INTERRUPT_ENABLE);
 	if (ret)
 		return ret;
 
-	ret = regmap_update_bits(llcc_bcast_regmap, TRP_INTERRUPT_0_ENABLE,
+	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->trp_interrupt_0_enable,
 				 SB_DB_TRP_INTERRUPT_ENABLE,
 				 SB_DB_TRP_INTERRUPT_ENABLE);
 	if (ret)
 		return ret;
 
 	sb_err_threshold = (SB_ERROR_THRESHOLD << SB_ERROR_THRESHOLD_SHIFT);
-	ret = regmap_write(llcc_bcast_regmap, DRP_ECC_ERROR_CFG,
+	ret = regmap_write(llcc_bcast_regmap, drv->edac_reg_offset->drp_ecc_error_cfg,
 			   sb_err_threshold);
 	if (ret)
 		return ret;
 
-	ret = regmap_update_bits(llcc_bcast_regmap, CMN_INTERRUPT_2_ENABLE,
+	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
 				 DRP0_INTERRUPT_ENABLE,
 				 DRP0_INTERRUPT_ENABLE);
 	if (ret)
 		return ret;
 
-	ret = regmap_write(llcc_bcast_regmap, DRP_INTERRUPT_ENABLE,
+	ret = regmap_write(llcc_bcast_regmap, drv->edac_reg_offset->drp_interrupt_enable,
 			   SB_DB_DRP_INTERRUPT_ENABLE);
 	return ret;
 }
@@ -170,29 +128,33 @@ static int qcom_llcc_core_setup(struct regmap *llcc_bcast_regmap)
 static int
 qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
 {
-	int ret = 0;
+	int ret;
 
 	switch (err_type) {
 	case LLCC_DRAM_CE:
 	case LLCC_DRAM_UE:
-		ret = regmap_write(drv->bcast_regmap, DRP_INTERRUPT_CLEAR,
+		ret = regmap_write(drv->bcast_regmap,
+				   drv->edac_reg_offset->drp_interrupt_clear,
 				   DRP_TRP_INT_CLEAR);
 		if (ret)
 			return ret;
 
-		ret = regmap_write(drv->bcast_regmap, DRP_ECC_ERROR_CNTR_CLEAR,
+		ret = regmap_write(drv->bcast_regmap,
+				   drv->edac_reg_offset->drp_ecc_error_cntr_clear,
 				   DRP_TRP_CNT_CLEAR);
 		if (ret)
 			return ret;
 		break;
 	case LLCC_TRAM_CE:
 	case LLCC_TRAM_UE:
-		ret = regmap_write(drv->bcast_regmap, TRP_INTERRUPT_0_CLEAR,
+		ret = regmap_write(drv->bcast_regmap,
+				   drv->edac_reg_offset->trp_interrupt_0_clear,
 				   DRP_TRP_INT_CLEAR);
 		if (ret)
 			return ret;
 
-		ret = regmap_write(drv->bcast_regmap, TRP_ECC_ERROR_CNTR_CLEAR,
+		ret = regmap_write(drv->bcast_regmap,
+				   drv->edac_reg_offset->trp_ecc_error_cntr_clear,
 				   DRP_TRP_CNT_CLEAR);
 		if (ret)
 			return ret;
@@ -205,16 +167,54 @@ qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv)
 	return ret;
 }
 
+struct qcom_llcc_syn_regs {
+	u32 synd_reg;
+	u32 count_status_reg;
+	u32 ways_status_reg;
+};
+
+static void get_reg_offsets(struct llcc_drv_data *drv, int err_type,
+			    struct qcom_llcc_syn_regs *syn_regs)
+{
+	const struct llcc_edac_reg_offset *edac_reg_offset = drv->edac_reg_offset;
+
+	switch (err_type) {
+	case LLCC_DRAM_CE:
+		syn_regs->synd_reg = edac_reg_offset->drp_ecc_sb_err_syn0;
+		syn_regs->count_status_reg = edac_reg_offset->drp_ecc_error_status1;
+		syn_regs->ways_status_reg = edac_reg_offset->drp_ecc_error_status0;
+		break;
+	case LLCC_DRAM_UE:
+		syn_regs->synd_reg = edac_reg_offset->drp_ecc_db_err_syn0;
+		syn_regs->count_status_reg = edac_reg_offset->drp_ecc_error_status1;
+		syn_regs->ways_status_reg = edac_reg_offset->drp_ecc_error_status0;
+		break;
+	case LLCC_TRAM_CE:
+		syn_regs->synd_reg = edac_reg_offset->trp_ecc_sb_err_syn0;
+		syn_regs->count_status_reg = edac_reg_offset->trp_ecc_error_status1;
+		syn_regs->ways_status_reg = edac_reg_offset->trp_ecc_error_status0;
+		break;
+	case LLCC_TRAM_UE:
+		syn_regs->synd_reg = edac_reg_offset->trp_ecc_db_err_syn0;
+		syn_regs->count_status_reg = edac_reg_offset->trp_ecc_error_status1;
+		syn_regs->ways_status_reg = edac_reg_offset->trp_ecc_error_status0;
+		break;
+	}
+}
+
 /* Dump Syndrome registers data for Tag RAM, Data RAM bit errors*/
 static int
 dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
 {
 	struct llcc_edac_reg_data reg_data = edac_reg_data[err_type];
+	struct qcom_llcc_syn_regs regs = { };
 	int err_cnt, err_ways, ret, i;
 	u32 synd_reg, synd_val;
 
+	get_reg_offsets(drv, err_type, &regs);
+
 	for (i = 0; i < reg_data.reg_cnt; i++) {
-		synd_reg = reg_data.synd_reg + (i * 4);
+		synd_reg = regs.synd_reg + (i * 4);
 		ret = regmap_read(drv->regmaps[bank], synd_reg,
 				  &synd_val);
 		if (ret)
@@ -224,7 +224,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
 			    reg_data.name, i, synd_val);
 	}
 
-	ret = regmap_read(drv->regmaps[bank], reg_data.count_status_reg,
+	ret = regmap_read(drv->regmaps[bank], regs.count_status_reg,
 			  &err_cnt);
 	if (ret)
 		goto clear;
@@ -234,7 +234,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
 	edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n",
 		    reg_data.name, err_cnt);
 
-	ret = regmap_read(drv->regmaps[bank], reg_data.ways_status_reg,
+	ret = regmap_read(drv->regmaps[bank], regs.ways_status_reg,
 			  &err_ways);
 	if (ret)
 		goto clear;
@@ -295,7 +295,7 @@ static irqreturn_t llcc_ecc_irq_handler(int irq, void *edev_ctl)
 
 	/* Iterate over the banks and look for Tag RAM or Data RAM errors */
 	for (i = 0; i < drv->num_banks; i++) {
-		ret = regmap_read(drv->regmaps[i], DRP_INTERRUPT_STATUS,
+		ret = regmap_read(drv->regmaps[i], drv->edac_reg_offset->drp_interrupt_status,
 				  &drp_error);
 
 		if (!ret && (drp_error & SB_ECC_ERROR)) {
@@ -310,7 +310,7 @@ static irqreturn_t llcc_ecc_irq_handler(int irq, void *edev_ctl)
 		if (!ret)
 			irq_rc = IRQ_HANDLED;
 
-		ret = regmap_read(drv->regmaps[i], TRP_INTERRUPT_0_STATUS,
+		ret = regmap_read(drv->regmaps[i], drv->edac_reg_offset->trp_interrupt_0_status,
 				  &trp_error);
 
 		if (!ret && (trp_error & SB_ECC_ERROR)) {
@@ -342,7 +342,7 @@ static int qcom_llcc_edac_probe(struct platform_device *pdev)
 	int ecc_irq;
 	int rc;
 
-	rc = qcom_llcc_core_setup(llcc_driv_data->bcast_regmap);
+	rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap);
 	if (rc)
 		return rc;
 

drivers/firmware/arm_ffa/driver.c

@@ -424,6 +424,7 @@ ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize,
 		ep_mem_access->flag = 0;
 		ep_mem_access->reserved = 0;
 	}
+	mem_region->handle = 0;
 	mem_region->reserved_0 = 0;
 	mem_region->reserved_1 = 0;
 	mem_region->ep_count = args->nattrs;

drivers/soc/qcom/Makefile

@@ -32,4 +32,5 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
 obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
 obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=	kryo-l2-accessors.o
 obj-$(CONFIG_QCOM_ICC_BWMON)	+= icc-bwmon.o
-obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= ice.o
+qcom_ice-objs			+= ice.o
+obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= qcom_ice.o

drivers/soc/qcom/icc-bwmon.c

@@ -773,12 +773,12 @@ static int bwmon_probe(struct platform_device *pdev)
 	bwmon->max_bw_kbps = UINT_MAX;
 	opp = dev_pm_opp_find_bw_floor(dev, &bwmon->max_bw_kbps, 0);
 	if (IS_ERR(opp))
-		return dev_err_probe(dev, ret, "failed to find max peak bandwidth\n");
+		return dev_err_probe(dev, PTR_ERR(opp), "failed to find max peak bandwidth\n");
 
 	bwmon->min_bw_kbps = 0;
 	opp = dev_pm_opp_find_bw_ceil(dev, &bwmon->min_bw_kbps, 0);
 	if (IS_ERR(opp))
-		return dev_err_probe(dev, ret, "failed to find min peak bandwidth\n");
+		return dev_err_probe(dev, PTR_ERR(opp), "failed to find min peak bandwidth\n");
 
 	bwmon->dev = dev;
 

drivers/soc/qcom/ramp_controller.c

@@ -296,7 +296,7 @@ static int qcom_ramp_controller_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	qrc->desc = device_get_match_data(&pdev->dev);
-	if (!qrc)
+	if (!qrc->desc)
 		return -EINVAL;
 
 	qrc->regmap = devm_regmap_init_mmio(&pdev->dev, base, &qrc_regmap_config);

drivers/soc/qcom/rmtfs_mem.c

@@ -233,6 +233,7 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
 		num_vmids = 0;
 	} else if (num_vmids < 0) {
 		dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", num_vmids);
+		ret = num_vmids;
 		goto remove_cdev;
 	} else if (num_vmids > NUM_MAX_VMIDS) {
 		dev_warn(&pdev->dev,

drivers/soc/qcom/rpmh-rsc.c

@@ -1073,7 +1073,7 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
 	drv->ver.minor = rsc_id & (MINOR_VER_MASK << MINOR_VER_SHIFT);
 	drv->ver.minor >>= MINOR_VER_SHIFT;
 
-	if (drv->ver.major == 3 && drv->ver.minor >= 0)
+	if (drv->ver.major == 3)
 		drv->regs = rpmh_rsc_reg_offset_ver_3_0;
 	else
 		drv->regs = rpmh_rsc_reg_offset_ver_2_7;

drivers/soc/qcom/rpmhpd.c

@@ -342,6 +342,21 @@ static const struct rpmhpd_desc sm8150_desc = {
 	.num_pds = ARRAY_SIZE(sm8150_rpmhpds),
 };
 
+static struct rpmhpd *sa8155p_rpmhpds[] = {
+	[SA8155P_CX] = &cx_w_mx_parent,
+	[SA8155P_CX_AO] = &cx_ao_w_mx_parent,
+	[SA8155P_EBI] = &ebi,
+	[SA8155P_GFX] = &gfx,
+	[SA8155P_MSS] = &mss,
+	[SA8155P_MX] = &mx,
+	[SA8155P_MX_AO] = &mx_ao,
+};
+
+static const struct rpmhpd_desc sa8155p_desc = {
+	.rpmhpds = sa8155p_rpmhpds,
+	.num_pds = ARRAY_SIZE(sa8155p_rpmhpds),
+};
+
 /* SM8250 RPMH powerdomains */
 static struct rpmhpd *sm8250_rpmhpds[] = {
 	[SM8250_CX] = &cx_w_mx_parent,
@@ -519,6 +534,7 @@ static const struct rpmhpd_desc sc8280xp_desc = {
 
 static const struct of_device_id rpmhpd_match_table[] = {
 	{ .compatible = "qcom,qdu1000-rpmhpd", .data = &qdu1000_desc },
+	{ .compatible = "qcom,sa8155p-rpmhpd", .data = &sa8155p_desc },
 	{ .compatible = "qcom,sa8540p-rpmhpd", .data = &sa8540p_desc },
 	{ .compatible = "qcom,sa8775p-rpmhpd", .data = &sa8775p_desc },
 	{ .compatible = "qcom,sc7180-rpmhpd", .data = &sc7180_desc },

drivers/tee/amdtee/amdtee_if.h

@@ -118,16 +118,18 @@ struct tee_cmd_unmap_shared_mem {
 
 /**
  * struct tee_cmd_load_ta - load Trusted Application (TA) binary into TEE
- * @low_addr:    [in] bits [31:0] of the physical address of the TA binary
- * @hi_addr:     [in] bits [63:32] of the physical address of the TA binary
- * @size:        [in] size of TA binary in bytes
- * @ta_handle:   [out] return handle of the loaded TA
+ * @low_addr:       [in] bits [31:0] of the physical address of the TA binary
+ * @hi_addr:        [in] bits [63:32] of the physical address of the TA binary
+ * @size:           [in] size of TA binary in bytes
+ * @ta_handle:      [out] return handle of the loaded TA
+ * @return_origin:  [out] origin of return code after TEE processing
  */
 struct tee_cmd_load_ta {
 	u32 low_addr;
 	u32 hi_addr;
 	u32 size;
 	u32 ta_handle;
+	u32 return_origin;
 };
 
 /**

drivers/tee/amdtee/call.c

@@ -423,19 +423,23 @@ int handle_load_ta(void *data, u32 size, struct tee_ioctl_open_session_arg *arg)
 	if (ret) {
 		arg->ret_origin = TEEC_ORIGIN_COMMS;
 		arg->ret = TEEC_ERROR_COMMUNICATION;
-	} else if (arg->ret == TEEC_SUCCESS) {
-		ret = get_ta_refcount(load_cmd.ta_handle);
-		if (!ret) {
-			arg->ret_origin = TEEC_ORIGIN_COMMS;
-			arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
-
-			/* Unload the TA on error */
-			unload_cmd.ta_handle = load_cmd.ta_handle;
-			psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA,
-					    (void *)&unload_cmd,
-					    sizeof(unload_cmd), &ret);
-		} else {
-			set_session_id(load_cmd.ta_handle, 0, &arg->session);
+	} else {
+		arg->ret_origin = load_cmd.return_origin;
+
+		if (arg->ret == TEEC_SUCCESS) {
+			ret = get_ta_refcount(load_cmd.ta_handle);
+			if (!ret) {
+				arg->ret_origin = TEEC_ORIGIN_COMMS;
+				arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+
+				/* Unload the TA on error */
+				unload_cmd.ta_handle = load_cmd.ta_handle;
+				psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA,
+						    (void *)&unload_cmd,
+						    sizeof(unload_cmd), &ret);
+			} else {
+				set_session_id(load_cmd.ta_handle, 0, &arg->session);
+			}
 		}
 	}
 	mutex_unlock(&ta_refcount_mutex);

include/dt-bindings/power/qcom-rpmpd.h

@@ -90,6 +90,15 @@
 #define SM8150_MMCX	9
 #define SM8150_MMCX_AO	10
 
+/* SA8155P is a special case, kept for backwards compatibility */
+#define SA8155P_CX	SM8150_CX
+#define SA8155P_CX_AO	SM8150_CX_AO
+#define SA8155P_EBI	SM8150_EBI
+#define SA8155P_GFX	SM8150_GFX
+#define SA8155P_MSS	SM8150_MSS
+#define SA8155P_MX	SM8150_MX
+#define SA8155P_MX_AO	SM8150_MX_AO
+
 /* SM8250 Power Domain Indexes */
 #define SM8250_CX	0
 #define SM8250_CX_AO	1

include/linux/soc/qcom/llcc-qcom.h

@@ -69,9 +69,6 @@ struct llcc_slice_desc {
 /**
  * struct llcc_edac_reg_data - llcc edac registers data for each error type
  * @name: Name of the error
- * @synd_reg: Syndrome register address
- * @count_status_reg: Status register address to read the error count
- * @ways_status_reg: Status register address to read the error ways
  * @reg_cnt: Number of registers
  * @count_mask: Mask value to get the error count
  * @ways_mask: Mask value to get the error ways
@@ -80,9 +77,6 @@ struct llcc_slice_desc {
  */
 struct llcc_edac_reg_data {
 	char *name;
-	u64 synd_reg;
-	u64 count_status_reg;
-	u64 ways_status_reg;
 	u32 reg_cnt;
 	u32 count_mask;
 	u32 ways_mask;