powerpc/eeh: Add sysfs files in late probe

Move creating the EEH specific sysfs files into eeh_add_device_late()
rather than being open-coded all over the place. Calling the function is
generally done immediately after calling eeh_add_device_late() anyway. This
is also a correctness fix since currently the sysfs files will be added
even if the EEH probe happens to fail.

Similarly, on pseries we currently add the sysfs files before calling
eeh_add_device_late(). This is flat-out broken since the sysfs files
require the pci_dev->dev.archdata.edev pointer to be set, and that is done
in eeh_add_device_late().
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306073904.4737-1-oohall@gmail.com

arch/powerpc/include/asm/eeh.h

@@ -305,7 +305,6 @@ void eeh_add_device_early(struct pci_dn *);
 void eeh_add_device_tree_early(struct pci_dn *);
 void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
-void eeh_add_sysfs_files(struct pci_bus *);
 void eeh_remove_device(struct pci_dev *);
 int eeh_unfreeze_pe(struct eeh_pe *pe);
 int eeh_pe_reset_and_recover(struct eeh_pe *pe);
@@ -368,8 +367,6 @@ static inline void eeh_add_device_late(struct pci_dev *dev) { }
 
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
-static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
-
 static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)

arch/powerpc/kernel/eeh.c

@@ -1210,6 +1210,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 	dev->dev.archdata.edev = edev;
 
 	eeh_addr_cache_insert_dev(dev);
+	eeh_sysfs_add_device(dev);
 }
 
 /**
@@ -1237,29 +1238,6 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
 
-/**
- * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
- * @bus: PCI bus
- *
- * This routine must be used to add EEH sysfs files for PCI
- * devices which are attached to the indicated PCI bus. The PCI bus
- * is added after system boot through hotplug or dlpar.
- */
-void eeh_add_sysfs_files(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_sysfs_add_device(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				eeh_add_sysfs_files(subbus);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
-
 /**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed

arch/powerpc/kernel/of_platform.c

@@ -86,9 +86,6 @@ static int of_pci_phb_probe(struct platform_device *dev)
 	/* Add probed PCI devices to the device model */
 	pci_bus_add_devices(phb->bus);
 
-	/* sysfs files should only be added after devices are added */
-	eeh_add_sysfs_files(phb->bus);
-
 	return 0;
 }
 

arch/powerpc/kernel/pci-common.c

@@ -1404,9 +1404,6 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 
 	/* Add new devices to global lists.  Register in proc, sysfs. */
 	pci_bus_add_devices(bus);
-
-	/* sysfs files should only be added after devices are added */
-	eeh_add_sysfs_files(bus);
 }
 EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
 

arch/powerpc/platforms/powernv/eeh-powernv.c

@@ -48,7 +48,6 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
 	eeh_add_device_early(pdn);
 	eeh_add_device_late(pdev);
-	eeh_sysfs_add_device(pdev);
 }
 
 static int pnv_eeh_init(void)

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -68,7 +68,6 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 	}
 #endif
 	eeh_add_device_early(pdn);
-	eeh_add_device_late(pdev);
 #ifdef CONFIG_PCI_IOV
 	if (pdev->is_virtfn) {
 		struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -78,7 +77,7 @@ void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
 		eeh_add_to_parent_pe(edev);   /* Add as VF PE type */
 	}
 #endif
-	eeh_sysfs_add_device(pdev);
+	eeh_add_device_late(pdev);
 }
 
 /*