omapdss: HDMI: add HDMI wrapper IRQ flags

Add flags for the interrupts present in HDMI wrapper block, these will be used
to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap2/dss/hdmi_phy.c

@@ -17,9 +17,6 @@
 #include "dss.h"
 #include "ti_hdmi.h"
 
-#define HDMI_IRQ_LINK_CONNECT		(1 << 25)
-#define HDMI_IRQ_LINK_DISCONNECT	(1 << 26)
-
 void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
 {
 #define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\

drivers/video/omap2/dss/ti_hdmi.h

@@ -49,6 +49,21 @@
 #define HDMI_WP_AUDIO_CTRL			0x88
 #define HDMI_WP_AUDIO_DATA			0x8C
 
+/* HDMI WP IRQ flags */
+
+#define HDMI_IRQ_OCP_TIMEOUT			(1 << 4)
+#define HDMI_IRQ_AUDIO_FIFO_UNDERFLOW		(1 << 8)
+#define HDMI_IRQ_AUDIO_FIFO_OVERFLOW		(1 << 9)
+#define HDMI_IRQ_AUDIO_FIFO_SAMPLE_REQ		(1 << 10)
+#define HDMI_IRQ_VIDEO_VSYNC			(1 << 16)
+#define HDMI_IRQ_VIDEO_FRAME_DONE		(1 << 17)
+#define HDMI_IRQ_PHY_LINE5V_ASSERT		(1 << 24)
+#define HDMI_IRQ_LINK_CONNECT			(1 << 25)
+#define HDMI_IRQ_LINK_DISCONNECT		(1 << 26)
+#define HDMI_IRQ_PLL_LOCK			(1 << 29)
+#define HDMI_IRQ_PLL_UNLOCK			(1 << 30)
+#define HDMI_IRQ_PLL_RECAL			(1 << 31)
+
 /* HDMI PLL */
 
 #define PLLCTRL_PLL_CONTROL			0x0