Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c bugfixes from Wolfram Sang:
 "I2C driver bugfixes for the 3.17 release.  Details can be found in the
  commit messages, yet I think this is typical driver stuff"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: rcar: remove spinlock"
  i2c: at91: add bound checking on SMBus block length bytes
  i2c: rk3x: fix bug that cause transfer fails in master receive mode
  i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer.
  i2c: mv64xxx: continue probe when clock-frequency is missing
  i2c: rcar: fix MNR interrupt handling

drivers/i2c/busses/i2c-at91.c

@@ -101,6 +101,7 @@ struct at91_twi_dev {
 	unsigned twi_cwgr_reg;
 	struct at91_twi_pdata *pdata;
 	bool use_dma;
+	bool recv_len_abort;
 	struct at91_twi_dma dma;
 };
 
@@ -267,12 +268,24 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 	*dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff;
 	--dev->buf_len;
 
+	/* return if aborting, we only needed to read RHR to clear RXRDY*/
+	if (dev->recv_len_abort)
+		return;
+
 	/* handle I2C_SMBUS_BLOCK_DATA */
 	if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
-		dev->msg->flags &= ~I2C_M_RECV_LEN;
-		dev->buf_len += *dev->buf;
-		dev->msg->len = dev->buf_len + 1;
-		dev_dbg(dev->dev, "received block length %d\n", dev->buf_len);
+		/* ensure length byte is a valid value */
+		if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+			dev->msg->flags &= ~I2C_M_RECV_LEN;
+			dev->buf_len += *dev->buf;
+			dev->msg->len = dev->buf_len + 1;
+			dev_dbg(dev->dev, "received block length %d\n",
+					 dev->buf_len);
+		} else {
+			/* abort and send the stop by reading one more byte */
+			dev->recv_len_abort = true;
+			dev->buf_len = 1;
+		}
 	}
 
 	/* send stop if second but last byte has been read */
@@ -421,8 +434,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		}
 	}
 
-	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
-							dev->adapter.timeout);
+	ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+					     dev->adapter.timeout);
 	if (ret == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		at91_init_twi_bus(dev);
@@ -444,6 +457,12 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 		ret = -EIO;
 		goto error;
 	}
+	if (dev->recv_len_abort) {
+		dev_err(dev->dev, "invalid smbus block length recvd\n");
+		ret = -EPROTO;
+		goto error;
+	}
+
 	dev_dbg(dev->dev, "transfer complete\n");
 
 	return 0;
@@ -500,6 +519,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	dev->buf_len = m_start->len;
 	dev->buf = m_start->buf;
 	dev->msg = m_start;
+	dev->recv_len_abort = false;
 
 	ret = at91_do_twi_transfer(dev);
 

drivers/i2c/busses/i2c-mv64xxx.c

@@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	}
 	tclk = clk_get_rate(drv_data->clk);
 
-	rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
-	if (rc)
+	if (of_property_read_u32(np, "clock-frequency", &bus_freq))
 		bus_freq = 100000; /* 100kHz by default */
 
 	if (!mv64xxx_find_baud_factors(bus_freq, tclk,

drivers/i2c/busses/i2c-rcar.c

@@ -34,6 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 /* register offsets */
 #define ICSCR	0x00	/* slave ctrl */
@@ -95,6 +96,7 @@ struct rcar_i2c_priv {
 	struct i2c_msg	*msg;
 	struct clk *clk;
 
+	spinlock_t lock;
 	wait_queue_head_t wait;
 
 	int pos;
@@ -365,20 +367,20 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 	struct rcar_i2c_priv *priv = ptr;
 	u32 msr;
 
+	/*-------------- spin lock -----------------*/
+	spin_lock(&priv->lock);
+
 	msr = rcar_i2c_read(priv, ICMSR);
 
+	/* Only handle interrupts that are currently enabled */
+	msr &= rcar_i2c_read(priv, ICMIER);
+
 	/* Arbitration lost */
 	if (msr & MAL) {
 		rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST));
 		goto out;
 	}
 
-	/* Stop */
-	if (msr & MST) {
-		rcar_i2c_flags_set(priv, ID_DONE);
-		goto out;
-	}
-
 	/* Nack */
 	if (msr & MNR) {
 		/* go to stop phase */
@@ -388,6 +390,12 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 		goto out;
 	}
 
+	/* Stop */
+	if (msr & MST) {
+		rcar_i2c_flags_set(priv, ID_DONE);
+		goto out;
+	}
+
 	if (rcar_i2c_is_recv(priv))
 		rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
 	else
@@ -400,6 +408,9 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 		wake_up(&priv->wait);
 	}
 
+	spin_unlock(&priv->lock);
+	/*-------------- spin unlock -----------------*/
+
 	return IRQ_HANDLED;
 }
 
@@ -409,14 +420,21 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 {
 	struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
 	struct device *dev = rcar_i2c_priv_to_dev(priv);
+	unsigned long flags;
 	int i, ret, timeout;
 
 	pm_runtime_get_sync(dev);
 
+	/*-------------- spin lock -----------------*/
+	spin_lock_irqsave(&priv->lock, flags);
+
 	rcar_i2c_init(priv);
 	/* start clock */
 	rcar_i2c_write(priv, ICCCR, priv->icccr);
 
+	spin_unlock_irqrestore(&priv->lock, flags);
+	/*-------------- spin unlock -----------------*/
+
 	ret = rcar_i2c_bus_barrier(priv);
 	if (ret < 0)
 		goto out;
@@ -428,6 +446,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 			break;
 		}
 
+		/*-------------- spin lock -----------------*/
+		spin_lock_irqsave(&priv->lock, flags);
+
 		/* init each data */
 		priv->msg	= &msgs[i];
 		priv->pos	= 0;
@@ -437,6 +458,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 		ret = rcar_i2c_prepare_msg(priv);
 
+		spin_unlock_irqrestore(&priv->lock, flags);
+		/*-------------- spin unlock -----------------*/
+
 		if (ret < 0)
 			break;
 
@@ -540,6 +564,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	init_waitqueue_head(&priv->wait);
+	spin_lock_init(&priv->lock);
 
 	adap = &priv->adap;
 	adap->nr = pdev->id;

drivers/i2c/busses/i2c-rk3x.c

@@ -323,6 +323,10 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
 	/* ack interrupt */
 	i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
 
+	/* Can only handle a maximum of 32 bytes at a time */
+	if (len > 32)
+		len = 32;
+
 	/* read the data from receive buffer */
 	for (i = 0; i < len; ++i) {
 		if (i % 4 == 0)