staging: rtl8192e: Replace BIT10 to BIT31 with BIT(10) to BIT(31)

Replace custom macros BIT10 to BIT31 with standard kernel macros BIT(10) to
BIT(31) to shorten code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/294ff1d0b92a474a9ae0d48a54a9f99f14008053.1698042685.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h

@@ -61,12 +61,12 @@ enum _RTL8192PCI_HW {
 #define		CR_TE					0x04
 	SIFS		= 0x03E,
 	RCR			= 0x044,
-#define RCR_ONLYERLPKT		BIT31
-#define RCR_CBSSID		BIT23
-#define	RCR_ADD3		BIT21
-#define RCR_AMF			BIT20
-#define RCR_ADF			BIT18
-#define RCR_AICV		BIT12
+#define RCR_ONLYERLPKT		BIT(31)
+#define RCR_CBSSID		BIT(23)
+#define	RCR_ADD3		BIT(21)
+#define RCR_AMF			BIT(20)
+#define RCR_ADF			BIT(18)
+#define RCR_AICV		BIT(12)
 #define	RCR_AB			BIT(3)
 #define	RCR_AM			BIT(2)
 #define	RCR_APM			BIT(1)
@@ -102,14 +102,14 @@ enum _RTL8192PCI_HW {
 #define   SCR_NoSKMC				BIT(5)
 	SWREGULATOR	= 0x0BD,
 	INTA_MASK		= 0x0f4,
-#define IMR_TBDOK			BIT27
-#define IMR_TBDER			BIT26
-#define IMR_TXFOVW			BIT15
-#define IMR_TIMEOUT0			BIT14
-#define IMR_BcnInt			BIT13
-#define	IMR_RXFOVW			BIT12
-#define IMR_RDU				BIT11
-#define IMR_RXCMDOK			BIT10
+#define IMR_TBDOK			BIT(27)
+#define IMR_TBDER			BIT(26)
+#define IMR_TXFOVW			BIT(15)
+#define IMR_TIMEOUT0			BIT(14)
+#define IMR_BcnInt			BIT(13)
+#define	IMR_RXFOVW			BIT(12)
+#define IMR_RDU				BIT(11)
+#define IMR_RXCMDOK			BIT(10)
 #define IMR_BDOK			BIT(9)
 #define IMR_HIGHDOK			BIT(8)
 #define	IMR_COMDOK			BIT(7)
@@ -188,9 +188,9 @@ enum _RTL8192PCI_HW {
 #define RRSR_18M				BIT(7)
 #define RRSR_24M				BIT(8)
 #define RRSR_36M				BIT(9)
-#define RRSR_48M				BIT10
-#define RRSR_54M				BIT11
-#define BRSR_AckShortPmb			BIT23
+#define RRSR_48M				BIT(10)
+#define RRSR_54M				BIT(11)
+#define BRSR_AckShortPmb			BIT(23)
 	UFWP			= 0x318,
 	RATR0			= 0x320,
 #define	RATR_1M			0x00000001

drivers/staging/rtl8192e/rtl8192e/rtl_cam.c

@@ -17,7 +17,7 @@ void rtl92e_cam_reset(struct net_device *dev)
 {
 	u32 ulcommand = 0;
 
-	ulcommand |= BIT31 | BIT30;
+	ulcommand |= BIT(31) | BIT(30);
 	rtl92e_writel(dev, RWCAM, ulcommand);
 }
 
@@ -89,13 +89,13 @@ void rtl92e_set_key(struct net_device *dev, u8 EntryNo, u8 KeyIndex,
 	}
 
 	if (DefaultKey)
-		usConfig |= BIT15 | (KeyType << 2);
+		usConfig |= BIT(15) | (KeyType << 2);
 	else
-		usConfig |= BIT15 | (KeyType << 2) | KeyIndex;
+		usConfig |= BIT(15) | (KeyType << 2) | KeyIndex;
 
 	for (i = 0; i < CAM_CONTENT_COUNT; i++) {
 		TargetCommand  = i + CAM_CONTENT_COUNT * EntryNo;
-		TargetCommand |= BIT31 | BIT16;
+		TargetCommand |= BIT(31) | BIT(16);
 
 		if (i == 0) {
 			TargetContent = (u32)(*(MacAddr + 0)) << 16 |

drivers/staging/rtl8192e/rtl8192e/rtl_dm.c

@@ -292,25 +292,25 @@ static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
 				     ht_info->bCurShortGI20MHz);
 
 		pra->upper_rssi_threshold_ratr =
-				(pra->upper_rssi_threshold_ratr & (~BIT31)) |
-				((bshort_gi_enabled) ? BIT31 : 0);
+				(pra->upper_rssi_threshold_ratr & (~BIT(31))) |
+				((bshort_gi_enabled) ? BIT(31) : 0);
 
 		pra->middle_rssi_threshold_ratr =
-				(pra->middle_rssi_threshold_ratr & (~BIT31)) |
-				((bshort_gi_enabled) ? BIT31 : 0);
+				(pra->middle_rssi_threshold_ratr & (~BIT(31))) |
+				((bshort_gi_enabled) ? BIT(31) : 0);
 
 		if (priv->current_chnl_bw != HT_CHANNEL_WIDTH_20) {
 			pra->low_rssi_threshold_ratr =
-				(pra->low_rssi_threshold_ratr_40M & (~BIT31)) |
-				((bshort_gi_enabled) ? BIT31 : 0);
+				(pra->low_rssi_threshold_ratr_40M & (~BIT(31))) |
+				((bshort_gi_enabled) ? BIT(31) : 0);
 		} else {
 			pra->low_rssi_threshold_ratr =
-				(pra->low_rssi_threshold_ratr_20M & (~BIT31)) |
-				((bshort_gi_enabled) ? BIT31 : 0);
+				(pra->low_rssi_threshold_ratr_20M & (~BIT(31))) |
+				((bshort_gi_enabled) ? BIT(31) : 0);
 		}
 		pra->ping_rssi_ratr =
-				(pra->ping_rssi_ratr & (~BIT31)) |
-				((bshort_gi_enabled) ? BIT31 : 0);
+				(pra->ping_rssi_ratr & (~BIT(31))) |
+				((bshort_gi_enabled) ? BIT(31) : 0);
 
 		if (pra->ratr_state == DM_RATR_STA_HIGH) {
 			high_rssi_thresh_for_ra = pra->high2low_rssi_thresh_for_ra;

drivers/staging/rtl8192e/rtl819x_Qos.h

@@ -7,29 +7,6 @@
 #ifndef __INC_QOS_TYPE_H
 #define __INC_QOS_TYPE_H
 
-#define BIT10		   0x00000400
-#define BIT11		   0x00000800
-#define BIT12		   0x00001000
-#define BIT13		   0x00002000
-#define BIT14		   0x00004000
-#define BIT15		   0x00008000
-#define BIT16		   0x00010000
-#define BIT17		   0x00020000
-#define BIT18		   0x00040000
-#define BIT19		   0x00080000
-#define BIT20		   0x00100000
-#define BIT21		   0x00200000
-#define BIT22		   0x00400000
-#define BIT23		   0x00800000
-#define BIT24		   0x01000000
-#define BIT25		   0x02000000
-#define BIT26		   0x04000000
-#define BIT27		   0x08000000
-#define BIT28		   0x10000000
-#define BIT29		   0x20000000
-#define BIT30		   0x40000000
-#define BIT31		   0x80000000
-
 union qos_tsinfo {
 	u8		charData[3];
 	struct {

drivers/staging/rtl8192e/rtllib.h

@@ -1085,10 +1085,10 @@ struct rt_pwr_save_ctrl {
 
 #define RT_RF_CHANGE_SOURCE u32
 
-#define RF_CHANGE_BY_SW BIT31
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_SW BIT(31)
+#define RF_CHANGE_BY_HW BIT(30)
+#define RF_CHANGE_BY_PS BIT(29)
+#define RF_CHANGE_BY_IPS BIT(28)
 #define RF_CHANGE_BY_INIT	0
 
 enum country_code_type {