Commit 88131a81 authored by Lendacky, Thomas's avatar Lendacky, Thomas Committed by David S. Miller

amd-xgbe: Perform phy connect/disconnect at dev open/stop

A change added to the mdiobus/phy api added a module_get/module_put
during phy connect/disconnect processing. Currently, the driver
performs a phy connect during module probe and a phy disconnect during
module remove. With the addition of the module_get during phy connect
the amd-xgbe module use count is incremented and can no longer be
unloaded.

Move the phy connect/disconnect from the driver probe/remove functions
to the net_device_ops ndo_open/ndo_stop functions.  This allows the
module use count to be decremented when the device(s) are brought down
and allows the module to be unloaded.
Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f3d0e78d
......@@ -122,6 +122,7 @@
#include <linux/clk.h>
#include <linux/if_ether.h>
#include <linux/net_tstamp.h>
#include <linux/phy.h>
#include "xgbe.h"
#include "xgbe-common.h"
......@@ -521,6 +522,114 @@ static void xgbe_free_rx_skbuff(struct xgbe_prv_data *pdata)
DBGPR("<--xgbe_free_rx_skbuff\n");
}
static void xgbe_adjust_link(struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
struct phy_device *phydev = pdata->phydev;
int new_state = 0;
if (phydev == NULL)
return;
if (phydev->link) {
/* Flow control support */
if (pdata->pause_autoneg) {
if (phydev->pause || phydev->asym_pause) {
pdata->tx_pause = 1;
pdata->rx_pause = 1;
} else {
pdata->tx_pause = 0;
pdata->rx_pause = 0;
}
}
if (pdata->tx_pause != pdata->phy_tx_pause) {
hw_if->config_tx_flow_control(pdata);
pdata->phy_tx_pause = pdata->tx_pause;
}
if (pdata->rx_pause != pdata->phy_rx_pause) {
hw_if->config_rx_flow_control(pdata);
pdata->phy_rx_pause = pdata->rx_pause;
}
/* Speed support */
if (phydev->speed != pdata->phy_speed) {
new_state = 1;
switch (phydev->speed) {
case SPEED_10000:
hw_if->set_xgmii_speed(pdata);
break;
case SPEED_2500:
hw_if->set_gmii_2500_speed(pdata);
break;
case SPEED_1000:
hw_if->set_gmii_speed(pdata);
break;
}
pdata->phy_speed = phydev->speed;
}
if (phydev->link != pdata->phy_link) {
new_state = 1;
pdata->phy_link = 1;
}
} else if (pdata->phy_link) {
new_state = 1;
pdata->phy_link = 0;
pdata->phy_speed = SPEED_UNKNOWN;
}
if (new_state)
phy_print_status(phydev);
}
static int xgbe_phy_init(struct xgbe_prv_data *pdata)
{
struct net_device *netdev = pdata->netdev;
struct phy_device *phydev = pdata->phydev;
int ret;
pdata->phy_link = -1;
pdata->phy_speed = SPEED_UNKNOWN;
pdata->phy_tx_pause = pdata->tx_pause;
pdata->phy_rx_pause = pdata->rx_pause;
ret = phy_connect_direct(netdev, phydev, &xgbe_adjust_link,
pdata->phy_mode);
if (ret) {
netdev_err(netdev, "phy_connect_direct failed\n");
return ret;
}
if (!phydev->drv || (phydev->drv->phy_id == 0)) {
netdev_err(netdev, "phy_id not valid\n");
ret = -ENODEV;
goto err_phy_connect;
}
DBGPR(" phy_connect_direct succeeded for PHY %s, link=%d\n",
dev_name(&phydev->dev), phydev->link);
return 0;
err_phy_connect:
phy_disconnect(phydev);
return ret;
}
static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
{
if (!pdata->phydev)
return;
phy_disconnect(pdata->phydev);
}
int xgbe_powerdown(struct net_device *netdev, unsigned int caller)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
......@@ -986,11 +1095,16 @@ static int xgbe_open(struct net_device *netdev)
DBGPR("-->xgbe_open\n");
/* Initialize the phy */
ret = xgbe_phy_init(pdata);
if (ret)
return ret;
/* Enable the clocks */
ret = clk_prepare_enable(pdata->sysclk);
if (ret) {
netdev_alert(netdev, "dma clk_prepare_enable failed\n");
return ret;
goto err_phy_init;
}
ret = clk_prepare_enable(pdata->ptpclk);
......@@ -1047,6 +1161,9 @@ static int xgbe_open(struct net_device *netdev)
err_sysclk:
clk_disable_unprepare(pdata->sysclk);
err_phy_init:
xgbe_phy_exit(pdata);
return ret;
}
......@@ -1077,6 +1194,9 @@ static int xgbe_close(struct net_device *netdev)
clk_disable_unprepare(pdata->ptpclk);
clk_disable_unprepare(pdata->sysclk);
/* Release the phy */
xgbe_phy_exit(pdata);
DBGPR("<--xgbe_close\n");
return 0;
......
......@@ -116,7 +116,6 @@
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/spinlock.h>
#include <linux/mdio.h>
#include <linux/phy.h>
#include <linux/of.h>
......@@ -158,77 +157,6 @@ static int xgbe_mdio_write(struct mii_bus *mii, int prtad, int mmd_reg,
return 0;
}
static void xgbe_adjust_link(struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
struct phy_device *phydev = pdata->phydev;
int new_state = 0;
if (phydev == NULL)
return;
DBGPR_MDIO("-->xgbe_adjust_link: address=%d, newlink=%d, curlink=%d\n",
phydev->addr, phydev->link, pdata->phy_link);
if (phydev->link) {
/* Flow control support */
if (pdata->pause_autoneg) {
if (phydev->pause || phydev->asym_pause) {
pdata->tx_pause = 1;
pdata->rx_pause = 1;
} else {
pdata->tx_pause = 0;
pdata->rx_pause = 0;
}
}
if (pdata->tx_pause != pdata->phy_tx_pause) {
hw_if->config_tx_flow_control(pdata);
pdata->phy_tx_pause = pdata->tx_pause;
}
if (pdata->rx_pause != pdata->phy_rx_pause) {
hw_if->config_rx_flow_control(pdata);
pdata->phy_rx_pause = pdata->rx_pause;
}
/* Speed support */
if (phydev->speed != pdata->phy_speed) {
new_state = 1;
switch (phydev->speed) {
case SPEED_10000:
hw_if->set_xgmii_speed(pdata);
break;
case SPEED_2500:
hw_if->set_gmii_2500_speed(pdata);
break;
case SPEED_1000:
hw_if->set_gmii_speed(pdata);
break;
}
pdata->phy_speed = phydev->speed;
}
if (phydev->link != pdata->phy_link) {
new_state = 1;
pdata->phy_link = 1;
}
} else if (pdata->phy_link) {
new_state = 1;
pdata->phy_link = 0;
pdata->phy_speed = SPEED_UNKNOWN;
}
if (new_state)
phy_print_status(phydev);
DBGPR_MDIO("<--xgbe_adjust_link\n");
}
void xgbe_dump_phy_registers(struct xgbe_prv_data *pdata)
{
struct device *dev = pdata->dev;
......@@ -278,7 +206,6 @@ void xgbe_dump_phy_registers(struct xgbe_prv_data *pdata)
int xgbe_mdio_register(struct xgbe_prv_data *pdata)
{
struct net_device *netdev = pdata->netdev;
struct device_node *phy_node;
struct mii_bus *mii;
struct phy_device *phydev;
......@@ -293,7 +220,6 @@ int xgbe_mdio_register(struct xgbe_prv_data *pdata)
return -EINVAL;
}
/* Register with the MDIO bus */
mii = mdiobus_alloc();
if (mii == NULL) {
dev_err(pdata->dev, "mdiobus_alloc failed\n");
......@@ -348,26 +274,6 @@ int xgbe_mdio_register(struct xgbe_prv_data *pdata)
pdata->mii = mii;
pdata->mdio_mmd = MDIO_MMD_PCS;
pdata->phy_link = -1;
pdata->phy_speed = SPEED_UNKNOWN;
pdata->phy_tx_pause = pdata->tx_pause;
pdata->phy_rx_pause = pdata->rx_pause;
ret = phy_connect_direct(netdev, phydev, &xgbe_adjust_link,
pdata->phy_mode);
if (ret) {
netdev_err(netdev, "phy_connect_direct failed\n");
goto err_phy_device;
}
if (!phydev->drv || (phydev->drv->phy_id == 0)) {
netdev_err(netdev, "phy_id not valid\n");
ret = -ENODEV;
goto err_phy_connect;
}
DBGPR(" phy_connect_direct succeeded for PHY %s, link=%d\n",
dev_name(&phydev->dev), phydev->link);
phydev->autoneg = pdata->default_autoneg;
if (phydev->autoneg == AUTONEG_DISABLE) {
phydev->speed = pdata->default_speed;
......@@ -386,9 +292,6 @@ int xgbe_mdio_register(struct xgbe_prv_data *pdata)
return 0;
err_phy_connect:
phy_disconnect(phydev);
err_phy_device:
phy_device_free(phydev);
......@@ -408,7 +311,6 @@ void xgbe_mdio_unregister(struct xgbe_prv_data *pdata)
{
DBGPR("-->xgbe_mdio_unregister\n");
phy_disconnect(pdata->phydev);
pdata->phydev = NULL;
module_put(pdata->phy_module);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment