Merge branch 'mmp/multiplatform' into next/multiplatform

* mmp/multiplatform:
  ARM: mmp: avoid unused functions
  ARM: mmp: move into ARCH_MULTIPLATFORM
  ARM: mmp: make all header files local
  ARM: mmp: make plat-pxa build standalone
  ARM: mmp: remove remaining legacy pxa-dma support
  ARM: mohawk: allow building with MMU disabled
  ARM: make xscale iwmmxt code multiplatform aware
  clk: mmp: stop using platform headers

arch/arm/Kconfig

@@ -546,22 +546,6 @@ config ARCH_ORION5X
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 	  Orion-2 (5281), Orion-1-90 (6183).
 
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
-
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/include/asm/cputype.h

@@ -228,10 +228,26 @@ static inline int cpu_is_xsc3(void)
 }
 #endif
 
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) && \
+    !defined(CONFIG_CPU_MOHAWK)
+#define	cpu_is_xscale_family() 0
 #else
-#define	cpu_is_xscale()	1
+static inline int cpu_is_xscale_family(void)
+{
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+
+	switch (id) {
+	case 0x69052000: /* Intel XScale 1 */
+	case 0x69054000: /* Intel XScale 2 */
+	case 0x69056000: /* Intel XScale 3 */
+	case 0x56056000: /* Marvell XScale 3 */
+	case 0x56158000: /* Marvell Mohawk */
+		return 1;
+	}
+
+	return 0;
+}
 #endif
 
 /*

arch/arm/kernel/xscale-cp0.c

@@ -15,6 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/thread_notify.h>
+#include <asm/cputype.h>
+
+asm("	.arch armv5te\n");
 
 static inline void dsp_save_state(u32 *state)
 {
@@ -152,6 +155,10 @@ static int __init xscale_cp0_init(void)
 {
 	u32 cp_access;
 
+	/* do not attempt to probe iwmmxt on non-xscale family CPUs */
+	if (!cpu_is_xscale_family())
+		return 0;
+
 	cp_access = xscale_cp_access_read() & ~3;
 	xscale_cp_access_write(cp_access | 1);
 

arch/arm/mach-mmp/Kconfig

+menuconfig ARCH_MMP
+	bool "Marvell PXA168/910/MMP2"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_PXA
+	select PINCTRL
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+
 if ARCH_MMP
 
-menu "Marvell PXA168/910/MMP2 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implementations"
+
+if ATAGS
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -11,6 +24,7 @@ config MACH_ASPENITE
 
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -18,6 +32,7 @@ config MACH_ZYLONITE2
 
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -25,6 +40,7 @@ config MACH_AVENGERS_LITE
 
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -32,6 +48,7 @@ config MACH_TAVOREVB
 
 config MACH_TTC_DKB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -39,7 +56,7 @@ config MACH_TTC_DKB
 
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -50,7 +67,7 @@ config MACH_BROWNSTONE
 
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,7 +78,7 @@ config MACH_FLINT
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -72,6 +89,7 @@ config MACH_MARVELL_JASPER
 
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -79,14 +97,16 @@ config MACH_TETON_BGA
 
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
+endif
 
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
-	select USE_OF
+	depends on ARCH_MULTI_V5
 	select PINCTRL
 	select PINCTRL_SINGLE
 	select COMMON_CLK
@@ -99,11 +119,9 @@ config MACH_MMP_DT
 
 config MACH_MMP2_DT
 	bool "Support MMP2 (ARMv7) platforms from device tree"
-	depends on !CPU_MOHAWK
-	select USE_OF
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_SINGLE
-	select COMMON_CLK
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_PJ4
 	help

arch/arm/mach-mmp/Makefile

 #
 # Makefile for Marvell's PXA168 processors line
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
 
 obj-y				+= common.o devices.o time.o
 

arch/arm/mach-mmp/include/mach/addr-map.h → arch/arm/mach-mmp/addr-map.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/addr-map.h
- *
  *   Common address map definitions
  *
  * This program is free software; you can redistribute it and/or modify

arch/arm/mach-mmp/aspenite.c

@@ -22,14 +22,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {

arch/arm/mach-mmp/avengers_lite.c

@@ -17,10 +17,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 
 
 #include "common.h"

arch/arm/mach-mmp/brownstone.c

@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/clock-mmp2.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -105,7 +106,8 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
 };
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
 }

arch/arm/mach-mmp/clock-pxa168.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -85,7 +86,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 }

arch/arm/mach-mmp/clock-pxa910.c

@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -61,7 +62,8 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
 }

arch/arm/mach-mmp/clock.c

@@ -13,7 +13,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/regs-apbc.h>
+#include "regs-apbc.h"
 #include "clock.h"
 
 static void apbc_clk_enable(struct clk *clk)

arch/arm/mach-mmp/clock.h

 /*
- *  linux/arch/arm/mach-mmp/clock.h
- *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.

arch/arm/mach-mmp/common.c

@@ -15,8 +15,8 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
+#include "addr-map.h"
+#include "cputype.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/common.h

@@ -5,6 +5,3 @@ extern void timer_init(int irq);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
-extern void __init pxa168_clk_init(void);
-extern void __init pxa910_clk_init(void);
-extern void __init mmp2_clk_init(void);

arch/arm/mach-mmp/devices.c

@@ -12,10 +12,10 @@
 #include <linux/delay.h>
 
 #include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/devices.h>
-#include <mach/cputype.h>
-#include <mach/regs-usb.h>
+#include "irqs.h"
+#include "devices.h"
+#include "cputype.h"
+#include "regs-usb.h"
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -73,6 +73,8 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 }
 
 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +114,6 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;

arch/arm/mach-mmp/flint.c

@@ -21,10 +21,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/gplugd.c

@@ -16,9 +16,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/pxa168.h>
-#include <mach/mfp-pxa168.h>
+#include "irqs.h"
+#include "pxa168.h"
+#include "mfp-pxa168.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/dma.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/dma.h
- */
-
-#ifndef __ASM_MACH_DMA_H
-#define __ASM_MACH_DMA_H
-
-#include <mach/addr-map.h>
-
-#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
-
-#include <plat/dma.h>
-#endif /* __ASM_MACH_DMA_H */

arch/arm/mach-mmp/include/mach/hardware.h

-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */

arch/arm/mach-mmp/include/mach/regs-smc.h

-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
- *
- *  Static Memory Controller Registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_SMC_H
-#define __ASM_MACH_REGS_SMC_H
-
-#include <mach/addr-map.h>
-
-#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
-#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
-
-#define SMC_MSC0		SMC_REG(0x0020)
-#define SMC_MSC1		SMC_REG(0x0024)
-#define SMC_SXCNFG0		SMC_REG(0x0030)
-#define SMC_SXCNFG1		SMC_REG(0x0034)
-#define SMC_MEMCLKCFG		SMC_REG(0x0068)
-#define SMC_CSDFICFG0		SMC_REG(0x0090)
-#define SMC_CSDFICFG1		SMC_REG(0x0094)
-#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
-#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
-#define SMC_CSADRMAP0		SMC_REG(0x00c0)
-#define SMC_CSADRMAP1		SMC_REG(0x00c4)
-#define SMC_WE_AP0		SMC_REG(0x00e0)
-#define SMC_WE_AP1		SMC_REG(0x00e4)
-#define SMC_OE_AP0		SMC_REG(0x00f0)
-#define SMC_OE_AP1		SMC_REG(0x00f4)
-#define SMC_ADV_AP0		SMC_REG(0x0100)
-#define SMC_ADV_AP1		SMC_REG(0x0104)
-
-#endif /* __ASM_MACH_REGS_SMC_H */

arch/arm/mach-mmp/include/mach/uncompress.h

-/*
- * arch/arm/mach-mmp/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/addr-map.h>
-#include <asm/mach-types.h>
-
-#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
-#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
-#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
-
-volatile unsigned long *UART;
-
-static inline void putc(char c)
-{
-	/* UART enabled? */
-	if (!(UART[UART_IER] & UART_IER_UUE))
-		return;
-
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* default to UART2 */
-	UART = (unsigned long *)UART2_BASE;
-
-	if (machine_is_avengers_lite())
-		UART = (unsigned long *)UART3_BASE;
-}

arch/arm/mach-mmp/jasper.c

@@ -20,12 +20,12 @@
 #include <linux/mfd/max8925.h>
 #include <linux/interrupt.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/mfp-mmp2.h → arch/arm/mach-mmp/mfp-mmp2.h

 #ifndef __ASM_MACH_MFP_MMP2_H
 #define __ASM_MACH_MFP_MMP2_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)

arch/arm/mach-mmp/include/mach/mfp-pxa168.h → arch/arm/mach-mmp/mfp-pxa168.h

 #ifndef __ASM_MACH_MFP_PXA168_H
 #define __ASM_MACH_MFP_PXA168_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x1 << 13)

arch/arm/mach-mmp/include/mach/mfp-pxa910.h → arch/arm/mach-mmp/mfp-pxa910.h

 #ifndef __ASM_MACH_MFP_PXA910_H
 #define __ASM_MACH_MFP_PXA910_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)

arch/arm/mach-mmp/mmp2.c

@@ -9,6 +9,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,15 +21,14 @@
 #include <asm/hardware/cache-tauros2.h>
 
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/mmp2.h>
-#include <mach/pm-mmp2.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "mmp2.h"
+#include "pm-mmp2.h"
 
 #include "common.h"
 
@@ -110,8 +110,9 @@ static int __init mmp2_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
-		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		mmp2_clk_init();
+		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
+			      AXI_PHYS_BASE + 0x82800,
+			      APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;

arch/arm/mach-mmp/include/mach/mmp2.h → arch/arm/mach-mmp/mmp2.h

@@ -10,9 +10,10 @@ extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/dma-mmp_tdma.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
 extern struct pxa_device_desc mmp2_device_uart3;

arch/arm/mach-mmp/pm-mmp2.c

@@ -18,12 +18,12 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-mmp2.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-mmp2.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {

arch/arm/mach-mmp/include/mach/pm-mmp2.h → arch/arm/mach-mmp/pm-mmp2.h

@@ -11,7 +11,7 @@
 #ifndef __MMP2_PM_H__
 #define __MMP2_PM_H__
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
 #define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)

arch/arm/mach-mmp/pm-pxa910.c

@@ -19,12 +19,12 @@
 #include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/outercache.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-pxa910.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-pxa910.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {

arch/arm/mach-mmp/pxa168.c

@@ -13,25 +13,25 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/devices.h>
-#include <mach/mfp.h>
-#include <linux/dma-mapping.h>
-#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
 
-#include "common.h"
+#include "addr-map.h"
 #include "clock.h"
+#include "common.h"
+#include "cputype.h"
+#include "devices.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "pxa168.h"
+#include "regs-apbc.h"
+#include "regs-apmu.h"
+#include "regs-usb.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -55,8 +55,9 @@ static int __init pxa168_init(void)
 	if (cpu_is_pxa168()) {
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		pxa168_clk_init();
+		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;

arch/arm/mach-mmp/include/mach/pxa168.h → arch/arm/mach-mmp/pxa168.h

@@ -11,14 +11,15 @@ extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
 
+#include "devices.h"
+#include "cputype.h"
+
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
 extern struct pxa_device_desc pxa168_device_uart3;

arch/arm/mach-mmp/pxa910.c

@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -18,15 +19,14 @@
 
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/pm-pxa910.h>
-#include <mach/pxa910.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "pm-pxa910.h"
+#include "pxa910.h"
 
 #include "common.h"
 
@@ -96,8 +96,10 @@ static int __init pxa910_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		pxa910_clk_init();
+		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000,
+				APB_PHYS_BASE + 0x3b000);
 	}
 
 	return 0;

arch/arm/mach-mmp/include/mach/pxa910.h → arch/arm/mach-mmp/pxa910.h

@@ -7,10 +7,11 @@ extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/mmp_disp.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
 extern struct pxa_device_desc pxa910_device_twsi0;

arch/arm/mach-mmp/include/mach/regs-apbc.h → arch/arm/mach-mmp/regs-apbc.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
- *
  *   Application Peripheral Bus Clock Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APBC_H
 #define __ASM_MACH_REGS_APBC_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */

arch/arm/mach-mmp/include/mach/regs-apmu.h → arch/arm/mach-mmp/regs-apmu.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
- *
  *   Application Subsystem Power Management Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APMU_H
 #define __ASM_MACH_REGS_APMU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)

arch/arm/mach-mmp/include/mach/regs-icu.h → arch/arm/mach-mmp/regs-icu.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
- *
  *   Interrupt Control Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_ICU_H
 #define __ASM_MACH_ICU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))

arch/arm/mach-mmp/include/mach/regs-timers.h → arch/arm/mach-mmp/regs-timers.h

 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
- *
  *   Timers Module
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
 #define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)

arch/arm/mach-mmp/tavorevb.c

@@ -16,10 +16,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/teton_bga.c

@@ -23,11 +23,11 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/teton_bga.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "teton_bga.h"
+#include "irqs.h"
 
 #include "common.h"
 

arch/arm/mach-mmp/include/mach/teton_bga.h → arch/arm/mach-mmp/teton_bga.h

 /*
- *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
- *
  *  Support for the Marvell PXA168 Teton BGA Development Platform.
  *
  *  This program is free software; you can redistribute it and/or modify

arch/arm/mach-mmp/time.c

@@ -29,14 +29,13 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
-
-#include <mach/addr-map.h>
-#include <mach/regs-timers.h>
-#include <mach/regs-apbc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
 #include <asm/mach/time.h>
 
+#include "addr-map.h"
+#include "regs-timers.h"
+#include "regs-apbc.h"
+#include "irqs.h"
+#include "cputype.h"
 #include "clock.h"
 
 #ifdef CONFIG_CPU_MMP2

arch/arm/mach-mmp/ttc_dkb.c

@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
-#include <mach/regs-usb.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
+#include "regs-usb.h"
 
 #include "common.h"
 

arch/arm/mm/idmap.c

@@ -86,7 +86,7 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale_family())
 		prot |= PMD_BIT4;
 
 	pgd += pgd_index(addr);

arch/arm/mm/mmu.c

@@ -477,7 +477,7 @@ static void __init build_mem_type_table(void)
 	 * "update-able on write" bit on ARM610).  However, Xscale and
 	 * Xscale3 require this bit to be cleared.
 	 */
-	if (cpu_is_xscale() || cpu_is_xsc3()) {
+	if (cpu_is_xscale_family()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			mem_types[i].prot_sect &= ~PMD_BIT4;
 			mem_types[i].prot_l1 &= ~PMD_BIT4;

arch/arm/mm/proc-mohawk.S

@@ -342,11 +342,13 @@ ENTRY(cpu_mohawk_switch_mm)
  */
 	.align	5
 ENTRY(cpu_mohawk_set_pte_ext)
+#ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+#endif
 
 .globl	cpu_mohawk_suspend_size
 .equ	cpu_mohawk_suspend_size, 4 * 6

arch/arm/plat-pxa/Makefile

 #
 # Makefile for code common across different PXA processor families
 #
+ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
 
-obj-y	:= dma.o
+obj-$(CONFIG_ARCH_PXA)		:= dma.o
 
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o

arch/arm/plat-pxa/ssp.c

@@ -34,7 +34,6 @@
 #include <linux/of_device.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);

drivers/clk/mmp/clk-mmp2.c

@@ -9,6 +9,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
@@ -16,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x0
@@ -73,7 +72,8 @@ static const char *sdh_parent[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
 static const char *disp_parent[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_16", "vctcxo"};
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	struct clk *clk;
 	struct clk *vctcxo;
@@ -81,19 +81,19 @@ void __init mmp2_clk_init(void)
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;

drivers/clk/mmp/clk-pxa168.c

@@ -9,6 +9,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
@@ -16,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x28
@@ -66,7 +65,8 @@ static const char *disp_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	struct clk *clk;
 	struct clk *uart_pll;
@@ -74,19 +74,19 @@ void __init pxa168_clk_init(void)
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;

drivers/clk/mmp/clk-pxa910.c

@@ -9,6 +9,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
@@ -16,8 +17,6 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 
-#include <mach/addr-map.h>
-
 #include "clk.h"
 
 #define APBC_RTC	0x28
@@ -64,7 +63,8 @@ static const char *disp_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_parent[] = {"pll1_2", "pll1_12"};
 static const char *ccic_phy_parent[] = {"pll1_6", "pll1_12"};
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	struct clk *clk;
 	struct clk *uart_pll;
@@ -73,25 +73,25 @@ void __init pxa910_clk_init(void)
 	void __iomem *apbcp_base;
 	void __iomem *apbc_base;
 
-	mpmu_base = ioremap(APB_PHYS_BASE + 0x50000, SZ_4K);
+	mpmu_base = ioremap(mpmu_phys, SZ_4K);
 	if (mpmu_base == NULL) {
 		pr_err("error to ioremap MPMU base\n");
 		return;
 	}
 
-	apmu_base = ioremap(AXI_PHYS_BASE + 0x82800, SZ_4K);
+	apmu_base = ioremap(apmu_phys, SZ_4K);
 	if (apmu_base == NULL) {
 		pr_err("error to ioremap APMU base\n");
 		return;
 	}
 
-	apbcp_base = ioremap(APB_PHYS_BASE + 0x3b000, SZ_4K);
+	apbcp_base = ioremap(apbcp_phys, SZ_4K);
 	if (apbcp_base == NULL) {
 		pr_err("error to ioremap APBC extension base\n");
 		return;
 	}
 
-	apbc_base = ioremap(APB_PHYS_BASE + 0x15000, SZ_4K);
+	apbc_base = ioremap(apbc_phys, SZ_4K);
 	if (apbc_base == NULL) {
 		pr_err("error to ioremap APBC base\n");
 		return;

include/linux/clk/mmp.h

+#ifndef __CLK_MMP_H
+#define __CLK_MMP_H
+
+#include <linux/types.h>
+
+extern void pxa168_clk_init(phys_addr_t mpmu_phys,
+			    phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys);
+extern void pxa910_clk_init(phys_addr_t mpmu_phys,
+			    phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys,
+			    phys_addr_t apbcp_phys);
+extern void mmp2_clk_init(phys_addr_t mpmu_phys,
+			  phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys);
+
+#endif