Skip to content

L
linux
Commit 886e1387 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller
Browse files
Options

net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields 

Currently Felix and Ocelot share the same bit layout in these per-port
registers, but Seville does not. So we need reg_fields for that.

Actually since these are per-port registers, we need to also specify the
number of ports, and register size per port, and use the regmap API for
multiple ports.

There's a more subtle point to be made about the other 2 register
fields:
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG
- QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE
which we are not writing any longer, for 2 reasons:
- Using the previous API (ocelot_write_rix), we were only writing 1 for
  Felix and Ocelot, which was their hardware-default value, and which
  there wasn't any intention in changing.
- In the case of SCH_NEXT_CFG, in fact Seville does not have this
  register field at all, and therefore, if we want to have common code
  we would be required to not write to it.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2789658f
Hide whitespace changes
Inline Side-by-side
Showing with 56 additions and 60 deletions
drivers/net/dsa/ocelot/felix.c
View file @ 886e1387
......@@ -249,8 +249,7 @@ static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 0);
}
static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
......@@ -326,10 +325,8 @@ static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
ANA_PORT_PORT_CFG, port);
/* Core: Enable port for frame transfer */
ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
ocelot_fields_write(ocelot, port,
QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
if (felix->info->pcs_link_up)
felix->info->pcs_link_up(ocelot, port, link_an_mode, interface,
......
drivers/net/dsa/ocelot/felix_vsc9959.c
View file @ 886e1387
......@@ -503,6 +503,17 @@ static const struct reg_field vsc9959_regfields[REGFIELD_MAX] = {
[ANA_TABLES_MACTINDX_M_INDEX] = REG_FIELD(ANA_TABLES_MACTINDX, 0, 10),
[SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 0, 0),
[GCB_SOFT_RST_SWC_RST] = REG_FIELD(GCB_SOFT_RST, 0, 0),
/* Replicated per number of ports (7), register size 4 per port */
[QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 7, 4),
[QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 7, 4),
[QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 7, 4),
[QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 7, 4),
[QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 7, 4),
[QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 7, 4),
[SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 7, 4),
[SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 7, 4),
[SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 7, 4),
[SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 7, 4),
};
static const struct ocelot_stat_layout vsc9959_stats_layout[] = {
......
drivers/net/ethernet/mscc/ocelot.c
View file @ 886e1387
......@@ -389,10 +389,8 @@ void ocelot_adjust_link(struct ocelot *ocelot, int port,
ANA_PFC_PFC_CFG, port);
/* Core: Enable port for frame transfer */
ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
ocelot_fields_write(ocelot, port,
QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* Flow control */
ocelot_write_rix(ocelot, SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
......@@ -423,8 +421,7 @@ void ocelot_port_disable(struct ocelot *ocelot, int port)
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, port);
ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 0);
}
EXPORT_SYMBOL(ocelot_port_disable);
......@@ -1392,27 +1389,22 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
QSYS_EXT_CPU_CFG);
/* Enable NPI port */
ocelot_write_rix(ocelot,
QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, npi);
ocelot_fields_write(ocelot, npi,
QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* NPI port Injection/Extraction configuration */
ocelot_write_rix(ocelot,
SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
SYS_PORT_MODE_INCL_INJ_HDR(injection),
SYS_PORT_MODE, npi);
ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_XTR_HDR,
extraction);
ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_INJ_HDR,
injection);
}
/* Enable CPU port module */
ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE, cpu);
ocelot_fields_write(ocelot, cpu, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* CPU port Injection/Extraction configuration */
ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
SYS_PORT_MODE_INCL_INJ_HDR(injection),
SYS_PORT_MODE, cpu);
ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_XTR_HDR,
extraction);
ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_INJ_HDR,
injection);
/* Configure the CPU port to be VLAN aware */
ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
......
drivers/net/ethernet/mscc/ocelot.h
View file @ 886e1387
......@@ -102,9 +102,6 @@ void ocelot_port_lag_leave(struct ocelot *ocelot, int port,
u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
int ocelot_probe_port(struct ocelot *ocelot, int port, struct regmap *target,
struct phy_device *phy);
......@@ -116,7 +113,4 @@ extern struct notifier_block ocelot_netdevice_nb;
extern struct notifier_block ocelot_switchdev_nb;
extern struct notifier_block ocelot_switchdev_blocking_nb;
#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
#endif
drivers/net/ethernet/mscc/ocelot_io.c
View file @ 886e1387
......@@ -89,6 +89,8 @@ int ocelot_regfields_init(struct ocelot *ocelot,
regfield.reg = ocelot->map[target][reg & REG_MASK];
regfield.lsb = regfields[i].lsb;
regfield.msb = regfields[i].msb;
regfield.id_size = regfields[i].id_size;
regfield.id_offset = regfields[i].id_offset;
ocelot->regfields[i] =
devm_regmap_field_alloc(ocelot->dev,
......
drivers/net/ethernet/mscc/ocelot_vsc7514.c
View file @ 886e1387
......@@ -358,6 +358,17 @@ static const struct reg_field ocelot_regfields[REGFIELD_MAX] = {
[SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 2, 2),
[SYS_RESET_CFG_MEM_ENA] = REG_FIELD(SYS_RESET_CFG, 1, 1),
[SYS_RESET_CFG_MEM_INIT] = REG_FIELD(SYS_RESET_CFG, 0, 0),
/* Replicated per number of ports (11), register size 4 per port */
[QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 11, 4),
[QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 11, 4),
[QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 11, 4),
[QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 11, 4),
[QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 11, 4),
[QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 11, 4),
[SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 11, 4),
[SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 11, 4),
[SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 11, 4),
[SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 11, 4),
};
static const struct ocelot_stat_layout ocelot_stats_layout[] = {
......
include/soc/mscc/ocelot.h
View file @ 886e1387
......@@ -490,11 +490,21 @@ enum ocelot_regfield {
ANA_TABLES_MACACCESS_B_DOM,
ANA_TABLES_MACTINDX_BUCKET,
ANA_TABLES_MACTINDX_M_INDEX,
QSYS_SWITCH_PORT_MODE_PORT_ENA,
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG,
QSYS_SWITCH_PORT_MODE_YEL_RSRVD,
QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE,
QSYS_SWITCH_PORT_MODE_TX_PFC_ENA,
QSYS_SWITCH_PORT_MODE_TX_PFC_MODE,
QSYS_TIMED_FRAME_ENTRY_TFRM_VLD,
QSYS_TIMED_FRAME_ENTRY_TFRM_FP,
QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO,
QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL,
QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T,
SYS_PORT_MODE_DATA_WO_TS,
SYS_PORT_MODE_INCL_INJ_HDR,
SYS_PORT_MODE_INCL_XTR_HDR,
SYS_PORT_MODE_INCL_HDR_ERR,
SYS_RESET_CFG_CORE_ENA,
SYS_RESET_CFG_MEM_ENA,
SYS_RESET_CFG_MEM_INIT,
......@@ -638,6 +648,11 @@ struct ocelot_policer {
#define ocelot_rmw_rix(ocelot, val, m, reg, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_RSZ * (ri))
#define ocelot_rmw(ocelot, val, m, reg) __ocelot_rmw_ix(ocelot, val, m, reg, 0)
#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
#define ocelot_fields_write(ocelot, id, reg, val) regmap_fields_write((ocelot)->regfields[(reg)], (id), (val))
#define ocelot_fields_read(ocelot, id, reg, val) regmap_fields_read((ocelot)->regfields[(reg)], (id), (val))
/* I/O */
u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
......
include/soc/mscc/ocelot_qsys.h
View file @ 886e1387
......@@ -13,19 +13,6 @@
#define QSYS_PORT_MODE_DEQUEUE_DIS BIT(1)
#define QSYS_PORT_MODE_DEQUEUE_LATE BIT(0)
#define QSYS_SWITCH_PORT_MODE_RSZ 0x4
#define QSYS_SWITCH_PORT_MODE_PORT_ENA BIT(14)
#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(x) (((x) << 11) & GENMASK(13, 11))
#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_M GENMASK(13, 11)
#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_X(x) (((x) & GENMASK(13, 11)) >> 11)
#define QSYS_SWITCH_PORT_MODE_YEL_RSRVD BIT(10)
#define QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE BIT(9)
#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA(x) (((x) << 1) & GENMASK(8, 1))
#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_M GENMASK(8, 1)
#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_X(x) (((x) & GENMASK(8, 1)) >> 1)
#define QSYS_SWITCH_PORT_MODE_TX_PFC_MODE BIT(0)
#define QSYS_STAT_CNT_CFG_TX_GREEN_CNT_MODE BIT(5)
#define QSYS_STAT_CNT_CFG_TX_YELLOW_CNT_MODE BIT(4)
#define QSYS_STAT_CNT_CFG_DROP_GREEN_CNT_MODE BIT(3)
......
include/soc/mscc/ocelot_sys.h
View file @ 886e1387
......@@ -12,19 +12,6 @@
#define SYS_COUNT_TX_OCTETS_RSZ 0x4
#define SYS_PORT_MODE_RSZ 0x4
#define SYS_PORT_MODE_DATA_WO_TS(x) (((x) << 5) & GENMASK(6, 5))
#define SYS_PORT_MODE_DATA_WO_TS_M GENMASK(6, 5)
#define SYS_PORT_MODE_DATA_WO_TS_X(x) (((x) & GENMASK(6, 5)) >> 5)
#define SYS_PORT_MODE_INCL_INJ_HDR(x) (((x) << 3) & GENMASK(4, 3))
#define SYS_PORT_MODE_INCL_INJ_HDR_M GENMASK(4, 3)
#define SYS_PORT_MODE_INCL_INJ_HDR_X(x) (((x) & GENMASK(4, 3)) >> 3)
#define SYS_PORT_MODE_INCL_XTR_HDR(x) (((x) << 1) & GENMASK(2, 1))
#define SYS_PORT_MODE_INCL_XTR_HDR_M GENMASK(2, 1)
#define SYS_PORT_MODE_INCL_XTR_HDR_X(x) (((x) & GENMASK(2, 1)) >> 1)
#define SYS_PORT_MODE_INJ_HDR_ERR BIT(0)
#define SYS_FRONT_PORT_MODE_RSZ 0x4
#define SYS_FRONT_PORT_MODE_HDX_MODE BIT(0)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7