Commit 887b1d1a authored by Daniel Golle's avatar Daniel Golle Committed by Jakub Kicinski

net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver

Clocks for SerDes and PHY are going to be handled by standalone drivers
for each of those hardware components. Drop them from the Ethernet driver.

The clocks which are being removed for this patch are responsible for
the for the SerDes PCS and PHYs used for the 2nd and 3rd MAC which are
anyway not yet supported. Hence backwards compatibility is not an issue.
Signed-off-by: default avatarDaniel Golle <daniel@makrotopia.org>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/b5faaf69b5c6e3e155c64af03706c3c423c6a1c9.1722335682.git.daniel@makrotopia.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 501c3005
......@@ -724,12 +724,8 @@ enum mtk_clks_map {
MTK_CLK_ETHWARP_WOCPU2,
MTK_CLK_ETHWARP_WOCPU1,
MTK_CLK_ETHWARP_WOCPU0,
MTK_CLK_TOP_USXGMII_SBUS_0_SEL,
MTK_CLK_TOP_USXGMII_SBUS_1_SEL,
MTK_CLK_TOP_SGM_0_SEL,
MTK_CLK_TOP_SGM_1_SEL,
MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL,
MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL,
MTK_CLK_TOP_ETH_GMII_SEL,
MTK_CLK_TOP_ETH_REFCK_50M_SEL,
MTK_CLK_TOP_ETH_SYS_200M_SEL,
......@@ -800,19 +796,9 @@ enum mtk_clks_map {
BIT_ULL(MTK_CLK_GP3) | BIT_ULL(MTK_CLK_XGP1) | \
BIT_ULL(MTK_CLK_XGP2) | BIT_ULL(MTK_CLK_XGP3) | \
BIT_ULL(MTK_CLK_CRYPTO) | \
BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
BIT_ULL(MTK_CLK_ETHWARP_WOCPU2) | \
BIT_ULL(MTK_CLK_ETHWARP_WOCPU1) | \
BIT_ULL(MTK_CLK_ETHWARP_WOCPU0) | \
BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_0_SEL) | \
BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_1_SEL) | \
BIT_ULL(MTK_CLK_TOP_SGM_0_SEL) | \
BIT_ULL(MTK_CLK_TOP_SGM_1_SEL) | \
BIT_ULL(MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL) | \
BIT_ULL(MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL) | \
BIT_ULL(MTK_CLK_TOP_ETH_GMII_SEL) | \
BIT_ULL(MTK_CLK_TOP_ETH_REFCK_50M_SEL) | \
BIT_ULL(MTK_CLK_TOP_ETH_SYS_200M_SEL) | \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment