Merge branch 'dsa-tagger-helpers'

Vladimir Oltean says:

====================
DSA tagger helpers

The goal of this series is to minimize the use of memmove and skb->data
in the DSA tagging protocol drivers. Unfiltered access to this level of
information is not very friendly to drive-by contributors, and sometimes
is also not the easiest to review.

For starters, I have converted the most common form of DSA tagging
protocols: the DSA headers which are placed where the EtherType is.

The helper functions introduced by this series are:
- dsa_alloc_etype_header
- dsa_strip_etype_header
- dsa_etype_header_pos_rx
- dsa_etype_header_pos_tx

This series is just a resend as non-RFC of v1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

net/dsa/dsa_priv.h

@@ -452,6 +452,84 @@ static inline void dsa_default_offload_fwd_mark(struct sk_buff *skb)
 	skb->offload_fwd_mark = !!(dp->bridge_dev);
 }
 
+/* Helper for removing DSA header tags from packets in the RX path.
+ * Must not be called before skb_pull(len).
+ *                                                                 skb->data
+ *                                                                         |
+ *                                                                         v
+ * |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+ * +-----------------------+-----------------------+---------------+-------+
+ * |    Destination MAC    |      Source MAC       |  DSA header   | EType |
+ * +-----------------------+-----------------------+---------------+-------+
+ *                                                 |               |
+ * <----- len ----->                               <----- len ----->
+ *                 |
+ *       >>>>>>>   v
+ *       >>>>>>>   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+ *       >>>>>>>   +-----------------------+-----------------------+-------+
+ *       >>>>>>>   |    Destination MAC    |      Source MAC       | EType |
+ *                 +-----------------------+-----------------------+-------+
+ *                                                                         ^
+ *                                                                         |
+ *                                                                 skb->data
+ */
+static inline void dsa_strip_etype_header(struct sk_buff *skb, int len)
+{
+	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - len, 2 * ETH_ALEN);
+}
+
+/* Helper for creating space for DSA header tags in TX path packets.
+ * Must not be called before skb_push(len).
+ *
+ * Before:
+ *
+ *       <<<<<<<   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+ * ^     <<<<<<<   +-----------------------+-----------------------+-------+
+ * |     <<<<<<<   |    Destination MAC    |      Source MAC       | EType |
+ * |               +-----------------------+-----------------------+-------+
+ * <----- len ----->
+ * |
+ * |
+ * skb->data
+ *
+ * After:
+ *
+ * |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+ * +-----------------------+-----------------------+---------------+-------+
+ * |    Destination MAC    |      Source MAC       |  DSA header   | EType |
+ * +-----------------------+-----------------------+---------------+-------+
+ * ^                                               |               |
+ * |                                               <----- len ----->
+ * skb->data
+ */
+static inline void dsa_alloc_etype_header(struct sk_buff *skb, int len)
+{
+	memmove(skb->data, skb->data + len, 2 * ETH_ALEN);
+}
+
+/* On RX, eth_type_trans() on the DSA master pulls ETH_HLEN bytes starting from
+ * skb_mac_header(skb), which leaves skb->data pointing at the first byte after
+ * what the DSA master perceives as the EtherType (the beginning of the L3
+ * protocol). Since DSA EtherType header taggers treat the EtherType as part of
+ * the DSA tag itself, and the EtherType is 2 bytes in length, the DSA header
+ * is located 2 bytes behind skb->data. Note that EtherType in this context
+ * means the first 2 bytes of the DSA header, not the encapsulated EtherType
+ * that will become visible after the DSA header is stripped.
+ */
+static inline void *dsa_etype_header_pos_rx(struct sk_buff *skb)
+{
+	return skb->data - 2;
+}
+
+/* On TX, skb->data points to skb_mac_header(skb), which means that EtherType
+ * header taggers start exactly where the EtherType is (the EtherType is
+ * treated as part of the DSA header).
+ */
+static inline void *dsa_etype_header_pos_tx(struct sk_buff *skb)
+{
+	return skb->data + 2 * ETH_ALEN;
+}
+
 /* switch.c */
 int dsa_switch_register_notifier(struct dsa_switch *ds);
 void dsa_switch_unregister_notifier(struct dsa_switch *ds);

net/dsa/tag_brcm.c

@@ -99,7 +99,7 @@ static struct sk_buff *brcm_tag_xmit_ll(struct sk_buff *skb,
 	skb_push(skb, BRCM_TAG_LEN);
 
 	if (offset)
-		memmove(skb->data, skb->data + BRCM_TAG_LEN, offset);
+		dsa_alloc_etype_header(skb, BRCM_TAG_LEN);
 
 	brcm_tag = skb->data + offset;
 
@@ -190,10 +190,7 @@ static struct sk_buff *brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev)
 	if (!nskb)
 		return nskb;
 
-	/* Move the Ethernet DA and SA */
-	memmove(nskb->data - ETH_HLEN,
-		nskb->data - ETH_HLEN - BRCM_TAG_LEN,
-		2 * ETH_ALEN);
+	dsa_strip_etype_header(skb, BRCM_TAG_LEN);
 
 	return nskb;
 }
@@ -231,7 +228,7 @@ static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
 
 	skb_push(skb, BRCM_LEG_TAG_LEN);
 
-	memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN);
+	dsa_alloc_etype_header(skb, BRCM_LEG_TAG_LEN);
 
 	brcm_tag = skb->data + 2 * ETH_ALEN;
 
@@ -257,7 +254,7 @@ static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 	if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID)))
 		return NULL;
 
-	brcm_tag = skb->data - 2;
+	brcm_tag = dsa_etype_header_pos_rx(skb);
 
 	source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
 
@@ -270,10 +267,7 @@ static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
 
 	dsa_default_offload_fwd_mark(skb);
 
-	/* Move the Ethernet DA and SA */
-	memmove(skb->data - ETH_HLEN,
-		skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN,
-		2 * ETH_ALEN);
+	dsa_strip_etype_header(skb, BRCM_LEG_TAG_LEN);
 
 	return skb;
 }

net/dsa/tag_dsa.c

@@ -166,11 +166,11 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev,
 	if (skb->protocol == htons(ETH_P_8021Q)) {
 		if (extra) {
 			skb_push(skb, extra);
-			memmove(skb->data, skb->data + extra, 2 * ETH_ALEN);
+			dsa_alloc_etype_header(skb, extra);
 		}
 
 		/* Construct tagged DSA tag from 802.1Q tag. */
-		dsa_header = skb->data + 2 * ETH_ALEN + extra;
+		dsa_header = dsa_etype_header_pos_tx(skb) + extra;
 		dsa_header[0] = (cmd << 6) | 0x20 | tag_dev;
 		dsa_header[1] = tag_port << 3;
 
@@ -181,10 +181,10 @@ static struct sk_buff *dsa_xmit_ll(struct sk_buff *skb, struct net_device *dev,
 		}
 	} else {
 		skb_push(skb, DSA_HLEN + extra);
-		memmove(skb->data, skb->data + DSA_HLEN + extra, 2 * ETH_ALEN);
+		dsa_alloc_etype_header(skb, DSA_HLEN + extra);
 
 		/* Construct untagged DSA tag. */
-		dsa_header = skb->data + 2 * ETH_ALEN + extra;
+		dsa_header = dsa_etype_header_pos_tx(skb) + extra;
 
 		dsa_header[0] = (cmd << 6) | tag_dev;
 		dsa_header[1] = tag_port << 3;
@@ -205,7 +205,7 @@ static struct sk_buff *dsa_rcv_ll(struct sk_buff *skb, struct net_device *dev,
 	u8 *dsa_header;
 
 	/* The ethertype field is part of the DSA header. */
-	dsa_header = skb->data - 2;
+	dsa_header = dsa_etype_header_pos_rx(skb);
 
 	cmd = dsa_header[0] >> 6;
 	switch (cmd) {
@@ -312,14 +312,10 @@ static struct sk_buff *dsa_rcv_ll(struct sk_buff *skb, struct net_device *dev,
 		memcpy(dsa_header, new_header, DSA_HLEN);
 
 		if (extra)
-			memmove(skb->data - ETH_HLEN,
-				skb->data - ETH_HLEN - extra,
-				2 * ETH_ALEN);
+			dsa_strip_etype_header(skb, extra);
 	} else {
 		skb_pull_rcsum(skb, DSA_HLEN);
-		memmove(skb->data - ETH_HLEN,
-			skb->data - ETH_HLEN - DSA_HLEN - extra,
-			2 * ETH_ALEN);
+		dsa_strip_etype_header(skb, DSA_HLEN + extra);
 	}
 
 	return skb;
@@ -364,7 +360,7 @@ static struct sk_buff *edsa_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!skb)
 		return NULL;
 
-	edsa_header = skb->data + 2 * ETH_ALEN;
+	edsa_header = dsa_etype_header_pos_tx(skb);
 	edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
 	edsa_header[1] = ETH_P_EDSA & 0xff;
 	edsa_header[2] = 0x00;

net/dsa/tag_lan9303.c

@@ -62,9 +62,10 @@ static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_push(skb, LAN9303_TAG_LEN);
 
 	/* make room between MACs and Ether-Type */
-	memmove(skb->data, skb->data + LAN9303_TAG_LEN, 2 * ETH_ALEN);
+	dsa_alloc_etype_header(skb, LAN9303_TAG_LEN);
+
+	lan9303_tag = dsa_etype_header_pos_tx(skb);
 
-	lan9303_tag = (__be16 *)(skb->data + 2 * ETH_ALEN);
 	tag = lan9303_xmit_use_arl(dp, skb->data) ?
 		LAN9303_TAG_TX_USE_ALR :
 		dp->index | LAN9303_TAG_TX_STP_OVERRIDE;
@@ -86,13 +87,7 @@ static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev)
 		return NULL;
 	}
 
-	/* '->data' points into the middle of our special VLAN tag information:
-	 *
-	 * ~ MAC src   | 0x81 | 0x00 | 0xyy | 0xzz | ether type
-	 *                           ^
-	 *                        ->data
-	 */
-	lan9303_tag = (__be16 *)(skb->data - 2);
+	lan9303_tag = dsa_etype_header_pos_rx(skb);
 
 	if (lan9303_tag[0] != htons(ETH_P_8021Q)) {
 		dev_warn_ratelimited(&dev->dev, "Dropping packet due to invalid VLAN marker\n");
@@ -112,8 +107,9 @@ static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev)
 	 * and the current ethertype field.
 	 */
 	skb_pull_rcsum(skb, 2 + 2);
-	memmove(skb->data - ETH_HLEN, skb->data - (ETH_HLEN + LAN9303_TAG_LEN),
-		2 * ETH_ALEN);
+
+	dsa_strip_etype_header(skb, LAN9303_TAG_LEN);
+
 	if (!(lan9303_tag1 & LAN9303_TAG_RX_TRAPPED_TO_CPU))
 		dsa_default_offload_fwd_mark(skb);
 

net/dsa/tag_mtk.c

@@ -41,10 +41,10 @@ static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
 	default:
 		xmit_tpid = MTK_HDR_XMIT_UNTAGGED;
 		skb_push(skb, MTK_HDR_LEN);
-		memmove(skb->data, skb->data + MTK_HDR_LEN, 2 * ETH_ALEN);
+		dsa_alloc_etype_header(skb, MTK_HDR_LEN);
 	}
 
-	mtk_tag = skb->data + 2 * ETH_ALEN;
+	mtk_tag = dsa_etype_header_pos_tx(skb);
 
 	/* Mark tag attribute on special tag insertion to notify hardware
 	 * whether that's a combined special tag with 802.1Q header.
@@ -70,19 +70,13 @@ static struct sk_buff *mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
 		return NULL;
 
-	/* The MTK header is added by the switch between src addr
-	 * and ethertype at this point, skb->data points to 2 bytes
-	 * after src addr so header should be 2 bytes right before.
-	 */
-	phdr = (__be16 *)(skb->data - 2);
+	phdr = dsa_etype_header_pos_rx(skb);
 	hdr = ntohs(*phdr);
 
 	/* Remove MTK tag and recalculate checksum. */
 	skb_pull_rcsum(skb, MTK_HDR_LEN);
 
-	memmove(skb->data - ETH_HLEN,
-		skb->data - ETH_HLEN - MTK_HDR_LEN,
-		2 * ETH_ALEN);
+	dsa_strip_etype_header(skb, MTK_HDR_LEN);
 
 	/* Get source port information */
 	port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);

net/dsa/tag_qca.c

@@ -36,8 +36,8 @@ static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	skb_push(skb, QCA_HDR_LEN);
 
-	memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
-	phdr = (__be16 *)(skb->data + 2 * ETH_ALEN);
+	dsa_alloc_etype_header(skb, QCA_HDR_LEN);
+	phdr = dsa_etype_header_pos_tx(skb);
 
 	/* Set the version field, and set destination port information */
 	hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
@@ -58,11 +58,7 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev)
 	if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
 		return NULL;
 
-	/* The QCA header is added by the switch between src addr and Ethertype
-	 * At this point, skb->data points to ethertype so header should be
-	 * right before
-	 */
-	phdr = (__be16 *)(skb->data - 2);
+	phdr = dsa_etype_header_pos_rx(skb);
 	hdr = ntohs(*phdr);
 
 	/* Make sure the version is correct */
@@ -72,8 +68,7 @@ static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev)
 
 	/* Remove QCA tag and recalculate checksum */
 	skb_pull_rcsum(skb, QCA_HDR_LEN);
-	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
-		ETH_HLEN - QCA_HDR_LEN);
+	dsa_strip_etype_header(skb, QCA_HDR_LEN);
 
 	/* Get source port information */
 	port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);

net/dsa/tag_rtl4_a.c

@@ -47,8 +47,8 @@ static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb,
 		   dp->index);
 	skb_push(skb, RTL4_A_HDR_LEN);
 
-	memmove(skb->data, skb->data + RTL4_A_HDR_LEN, 2 * ETH_ALEN);
-	tag = skb->data + 2 * ETH_ALEN;
+	dsa_alloc_etype_header(skb, RTL4_A_HDR_LEN);
+	tag = dsa_etype_header_pos_tx(skb);
 
 	/* Set Ethertype */
 	p = (__be16 *)tag;
@@ -76,12 +76,7 @@ static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb,
 	if (unlikely(!pskb_may_pull(skb, RTL4_A_HDR_LEN)))
 		return NULL;
 
-	/* The RTL4 header has its own custom Ethertype 0x8899 and that
-	 * starts right at the beginning of the packet, after the src
-	 * ethernet addr. Apparently skb->data always points 2 bytes in,
-	 * behind the Ethertype.
-	 */
-	tag = skb->data - 2;
+	tag = dsa_etype_header_pos_rx(skb);
 	p = (__be16 *)tag;
 	etype = ntohs(*p);
 	if (etype != RTL4_A_ETHERTYPE) {
@@ -108,10 +103,7 @@ static struct sk_buff *rtl4a_tag_rcv(struct sk_buff *skb,
 	/* Remove RTL4 tag and recalculate checksum */
 	skb_pull_rcsum(skb, RTL4_A_HDR_LEN);
 
-	/* Move ethernet DA and SA in front of the data */
-	memmove(skb->data - ETH_HLEN,
-		skb->data - ETH_HLEN - RTL4_A_HDR_LEN,
-		2 * ETH_ALEN);
+	dsa_strip_etype_header(skb, RTL4_A_HDR_LEN);
 
 	dsa_default_offload_fwd_mark(skb);
 

net/dsa/tag_sja1105.c

@@ -188,7 +188,6 @@ static struct sk_buff *sja1110_xmit(struct sk_buff *skb,
 	u16 tx_vid = dsa_8021q_tx_vid(dp->ds, dp->index);
 	u16 queue_mapping = skb_get_queue_mapping(skb);
 	u8 pcp = netdev_txq_to_tc(netdev, queue_mapping);
-	struct ethhdr *eth_hdr;
 	__be32 *tx_trailer;
 	__be16 *tx_header;
 	int trailer_pos;
@@ -206,28 +205,24 @@ static struct sk_buff *sja1110_xmit(struct sk_buff *skb,
 
 	skb_push(skb, SJA1110_HEADER_LEN);
 
-	/* Move Ethernet header to the left, making space for DSA tag */
-	memmove(skb->data, skb->data + SJA1110_HEADER_LEN, 2 * ETH_ALEN);
+	dsa_alloc_etype_header(skb, SJA1110_HEADER_LEN);
 
 	trailer_pos = skb->len;
 
-	/* On TX, skb->data points to skb_mac_header(skb) */
-	eth_hdr = (struct ethhdr *)skb->data;
-	tx_header = (__be16 *)(eth_hdr + 1);
+	tx_header = dsa_etype_header_pos_tx(skb);
 	tx_trailer = skb_put(skb, SJA1110_TX_TRAILER_LEN);
 
-	eth_hdr->h_proto = htons(ETH_P_SJA1110);
-
-	*tx_header = htons(SJA1110_HEADER_HOST_TO_SWITCH |
-			   SJA1110_TX_HEADER_HAS_TRAILER |
-			   SJA1110_TX_HEADER_TRAILER_POS(trailer_pos));
+	tx_header[0] = htons(ETH_P_SJA1110);
+	tx_header[1] = htons(SJA1110_HEADER_HOST_TO_SWITCH |
+			     SJA1110_TX_HEADER_HAS_TRAILER |
+			     SJA1110_TX_HEADER_TRAILER_POS(trailer_pos));
 	*tx_trailer = cpu_to_be32(SJA1110_TX_TRAILER_PRIO(pcp) |
 				  SJA1110_TX_TRAILER_SWITCHID(dp->ds->index) |
 				  SJA1110_TX_TRAILER_DESTPORTS(BIT(dp->index)));
 	if (clone) {
 		u8 ts_id = SJA1105_SKB_CB(clone)->ts_id;
 
-		*tx_header |= htons(SJA1110_TX_HEADER_TAKE_TS);
+		tx_header[1] |= htons(SJA1110_TX_HEADER_TAKE_TS);
 		*tx_trailer |= cpu_to_be32(SJA1110_TX_TRAILER_TSTAMP_ID(ts_id));
 	}
 
@@ -443,11 +438,11 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 
 static struct sk_buff *sja1110_rcv_meta(struct sk_buff *skb, u16 rx_header)
 {
+	u8 *buf = dsa_etype_header_pos_rx(skb) + SJA1110_HEADER_LEN;
 	int switch_id = SJA1110_RX_HEADER_SWITCH_ID(rx_header);
 	int n_ts = SJA1110_RX_HEADER_N_TS(rx_header);
 	struct net_device *master = skb->dev;
 	struct dsa_port *cpu_dp;
-	u8 *buf = skb->data + 2;
 	struct dsa_switch *ds;
 	int i;
 
@@ -532,9 +527,7 @@ static struct sk_buff *sja1110_rcv_inband_control_extension(struct sk_buff *skb,
 	/* Advance skb->data past the DSA header */
 	skb_pull_rcsum(skb, SJA1110_HEADER_LEN);
 
-	/* Remove the DSA header */
-	memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - SJA1110_HEADER_LEN,
-		2 * ETH_ALEN);
+	dsa_strip_etype_header(skb, SJA1110_HEADER_LEN);
 
 	/* With skb->data in its final place, update the MAC header
 	 * so that eth_hdr() continues to works properly.