Merge tag 'usb-serial-4.20-rc1' of...

Merge tag 'usb-serial-4.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v4.20-rc1

Here are the USB-serial updates for 4.20-rc1, including:

 - support for CBUS GPIO on FTDI devices (FTX and FT232R)
 - fix of a long-standing transfer-length bug

Included are also various clean ups.

All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-4.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  USB: serial: cypress_m8: fix interrupt-out transfer length
  USB: serial: ftdi_sio: add support for FT232R CBUS gpios
  USB: serial: ftdi_sio: fix gpio name collisions
  USB: serial: ftdi_sio: implement GPIO support for FT-X devices
  USB: serial: cypress_m8: fix spelling mistake "retreiving" -> "retrieving"

drivers/usb/serial/cypress_m8.c

@@ -378,7 +378,7 @@ static int cypress_serial_control(struct tty_struct *tty,
 			retval = -ENOTTY;
 			goto out;
 		}
-		dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
+		dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
 		do {
 			retval = usb_control_msg(port->serial->dev,
 					usb_rcvctrlpipe(port->serial->dev, 0),
@@ -769,7 +769,7 @@ static void cypress_send(struct usb_serial_port *port)
 
 	usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
 		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
-		port->interrupt_out_buffer, port->interrupt_out_size,
+		port->interrupt_out_buffer, actual_size,
 		cypress_write_int_callback, port, priv->write_urb_interval);
 	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 	if (result) {
@@ -863,7 +863,7 @@ static void cypress_set_termios(struct tty_struct *tty,
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct device *dev = &port->dev;
 	int data_bits, stop_bits, parity_type, parity_enable;
-	unsigned cflag, iflag;
+	unsigned int cflag;
 	unsigned long flags;
 	__u8 oldlines;
 	int linechange = 0;
@@ -899,7 +899,6 @@ static void cypress_set_termios(struct tty_struct *tty,
 	tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
 
 	cflag = tty->termios.c_cflag;
-	iflag = tty->termios.c_iflag;
 
 	/* check if there are new settings */
 	if (old_termios) {

drivers/usb/serial/ftdi_sio.h

@@ -35,7 +35,10 @@
 #define FTDI_SIO_SET_EVENT_CHAR		6 /* Set the event character */
 #define FTDI_SIO_SET_ERROR_CHAR		7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
-#define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
+#define FTDI_SIO_GET_LATENCY_TIMER	0x0a /* Get the latency timer */
+#define FTDI_SIO_SET_BITMODE		0x0b /* Set bitbang mode */
+#define FTDI_SIO_READ_PINS		0x0c /* Read immediate value of pins */
+#define FTDI_SIO_READ_EEPROM		0x90 /* Read EEPROM */
 
 /* Interface indices for FT2232, FT2232H and FT4232H devices */
 #define INTERFACE_A		1
@@ -433,6 +436,29 @@ enum ftdi_sio_baudrate {
  *         1 = active
  */
 
+/* FTDI_SIO_SET_BITMODE */
+#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40
+#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE
+
+/* Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST */
+#define FTDI_SIO_BITMODE_RESET		0x00
+#define FTDI_SIO_BITMODE_CBUS		0x20
+
+/* FTDI_SIO_READ_PINS */
+#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS
+
+/*
+ * FTDI_SIO_READ_EEPROM
+ *
+ * EEPROM format found in FTDI AN_201, "FT-X MTP memory Configuration",
+ * http://www.ftdichip.com/Support/Documents/AppNotes/AN_201_FT-X%20MTP%20Memory%20Configuration.pdf
+ */
+#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0
+#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM
+
+#define FTDI_FTX_CBUS_MUX_GPIO		0x8
+#define FTDI_FT232R_CBUS_MUX_GPIO	0xa
 
 
 /* Descriptors returned by the device