Commit 8995b161 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

parents cc918c7a fe5dd7c7
......@@ -154,6 +154,7 @@ config ARCH_RPC
select FIQ
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ISA_DMA_API
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
......@@ -206,6 +207,7 @@ config ARCH_IMX
config ARCH_H720X
bool "Hynix-HMS720x-based"
select ISA_DMA_API
help
This enables support for systems based on the Hynix HMS720x
......@@ -290,12 +292,14 @@ config ISA
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
# Select ISA DMA controller support
config ISA_DMA
bool
select ISA_DMA_API
# Select ISA DMA interface
config ISA_DMA_API
bool
default y
config PCI
bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
......@@ -656,7 +660,6 @@ source "kernel/power/Kconfig"
config APM
tristate "Advanced Power Management Emulation"
depends on PM_LEGACY
---help---
APM is a BIOS specification for saving power using several different
techniques. This is mostly useful for battery powered laptops with
......
......@@ -8,7 +8,7 @@
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
CPPFLAGS_vmlinux.lds = -DKERNEL_RAM_ADDR=$(TEXTADDR)
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .comment -S
GZFLAGS :=-9
#CFLAGS +=-pipe
......@@ -65,7 +65,7 @@ CHECKFLAGS += -D__arm__
#Default value
head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
textaddr-y := 0xC0008000
textofs-y := 0x00008000
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
......@@ -73,22 +73,20 @@ textaddr-y := 0xC0008000
incdir-$(CONFIG_ARCH_CLPS7500) := cl7500
machine-$(CONFIG_FOOTBRIDGE) := footbridge
incdir-$(CONFIG_FOOTBRIDGE) := ebsa285
textaddr-$(CONFIG_ARCH_CO285) := 0x60008000
machine-$(CONFIG_ARCH_CO285) := footbridge
incdir-$(CONFIG_ARCH_CO285) := ebsa285
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SA1100) := sa1100
ifeq ($(CONFIG_ARCH_SA1100),y)
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
textaddr-$(CONFIG_SA1111) := 0xc0208000
textofs-$(CONFIG_SA1111) := 0x00208000
endif
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_CAMELOT) := epxa10db
textaddr-$(CONFIG_ARCH_CLPS711X) := 0xc0028000
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
......@@ -110,7 +108,8 @@ CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
export CFLAGS_3c589_cs.o
endif
TEXTADDR := $(textaddr-y)
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
ifeq ($(incdir-y),)
incdir-y := $(machine-y)
......@@ -123,7 +122,7 @@ else
MACHINE :=
endif
export TEXTADDR GZFLAGS
export TEXT_OFFSET GZFLAGS
# Do we have FASTFPE?
FASTFPE :=arch/arm/fastfpe
......
......@@ -15,7 +15,7 @@ include $(srctree)/$(MACHINE)/Makefile.boot
endif
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(TEXTADDR)
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
ZRELADDR := $(zreladdr-y)
......
......@@ -23,5 +23,8 @@ config SHARP_LOCOMO
config SHARP_PARAM
bool
config SHARPSL_PM
bool
config SHARP_SCOOP
bool
......@@ -3,7 +3,6 @@
#
obj-y += rtctime.o
obj-$(CONFIG_ARM_AMBA) += amba.o
obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_ICST525) += icst525.o
obj-$(CONFIG_ICST307) += icst307.o
......@@ -13,4 +12,5 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_TIMER_ACORN) += time-acorn.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
......@@ -33,7 +33,6 @@ void reset_scoop(struct device *dev)
SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100; // 00
SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000; // 04
SCOOP_REG(sdev->base,SCOOP_CPR) = 0x0000; // 0C
SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000; // 10
SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000; // 18
SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF; // 14
......@@ -154,6 +153,7 @@ int __init scoop_probe(struct platform_device *pdev)
SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
reset_scoop(&pdev->dev);
SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000;
SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
......
This diff is collapsed.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc1-git5
# Tue Sep 20 17:26:28 2005
# Linux kernel version: 2.6.15
# Tue Jan 3 03:20:40 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
......@@ -33,6 +33,7 @@ CONFIG_SYSCTL=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
......@@ -42,7 +43,6 @@ CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
......@@ -61,6 +61,23 @@ CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
......@@ -83,6 +100,7 @@ CONFIG_ARCH_IXP4XX=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
......@@ -102,6 +120,7 @@ CONFIG_MACH_IXDPG425=y
CONFIG_MACH_IXDP465=y
CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_MACH_NAS100D=y
CONFIG_ARCH_IXDP4XX=y
CONFIG_CPU_IXP46X=y
# CONFIG_MACH_GTWX5715 is not set
......@@ -155,6 +174,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -173,6 +193,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
......@@ -187,6 +208,8 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM=y
#
......@@ -271,6 +294,10 @@ CONFIG_IP_VS_SH=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
#
......@@ -286,6 +313,7 @@ CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
......@@ -319,6 +347,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
......@@ -380,10 +409,18 @@ CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
......@@ -397,8 +434,10 @@ CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
......@@ -407,13 +446,14 @@ CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
......@@ -436,6 +476,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
......@@ -458,6 +503,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
......@@ -492,7 +538,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP4XX=y
# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
......@@ -522,6 +567,11 @@ CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
......@@ -548,14 +598,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
......@@ -668,6 +710,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
......@@ -739,6 +782,7 @@ CONFIG_NET_RADIO=y
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
......@@ -782,6 +826,7 @@ CONFIG_WAN_ROUTER_DRIVERS=y
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
......@@ -902,6 +947,7 @@ CONFIG_IXP4XX_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
......@@ -954,6 +1000,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
......@@ -1035,6 +1082,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
......@@ -1110,6 +1161,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
......@@ -1190,7 +1242,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
......
......@@ -2,15 +2,16 @@
# Makefile for the linux kernel.
#
AFLAGS_head.o := -DKERNEL_RAM_ADDR=$(TEXTADDR)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
# Object file lists.
obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \
obj-y := compat.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
time.o traps.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FOOTBRIDGE) += isa.o
obj-$(CONFIG_FIQ) += fiq.o
......
......@@ -20,7 +20,6 @@
#include <linux/apm_bios.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
......@@ -81,6 +80,7 @@ struct apm_user {
*/
static int suspends_pending;
static int apm_disabled;
static int arm_apm_active;
static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
......@@ -477,9 +477,9 @@ static int kapmd(void *arg)
apm_event_t event;
wait_event_interruptible(kapmd_wait,
!queue_empty(&kapmd_queue) || !pm_active);
!queue_empty(&kapmd_queue) || !arm_apm_active);
if (!pm_active)
if (!arm_apm_active)
break;
spin_lock_irq(&kapmd_queue_lock);
......@@ -522,16 +522,11 @@ static int __init apm_init(void)
return -ENODEV;
}
if (PM_IS_ACTIVE()) {
printk(KERN_NOTICE "apm: overridden by ACPI.\n");
return -EINVAL;
}
pm_active = 1;
arm_apm_active = 1;
ret = kernel_thread(kapmd, NULL, CLONE_KERNEL);
if (ret < 0) {
pm_active = 0;
arm_apm_active = 0;
return ret;
}
......@@ -543,7 +538,7 @@ static int __init apm_init(void)
if (ret != 0) {
remove_proc_entry("apm", NULL);
pm_active = 0;
arm_apm_active = 0;
wake_up(&kapmd_wait);
wait_for_completion(&kapmd_exit);
}
......@@ -556,7 +551,7 @@ static void __exit apm_exit(void)
misc_deregister(&apm_device);
remove_proc_entry("apm", NULL);
pm_active = 0;
arm_apm_active = 0;
wake_up(&kapmd_wait);
wait_for_completion(&kapmd_exit);
}
......
......@@ -18,7 +18,7 @@
*/
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/io.h>
......@@ -65,37 +65,41 @@ static void isa_enable_dma(dmach_t channel, dma_t *dma)
{
if (dma->invalid) {
unsigned long address, length;
unsigned int mode, direction;
unsigned int mode;
enum dma_data_direction direction;
mode = channel & 3;
switch (dma->dma_mode & DMA_MODE_MASK) {
case DMA_MODE_READ:
mode |= ISA_DMA_MODE_READ;
direction = PCI_DMA_FROMDEVICE;
direction = DMA_FROM_DEVICE;
break;
case DMA_MODE_WRITE:
mode |= ISA_DMA_MODE_WRITE;
direction = PCI_DMA_TODEVICE;
direction = DMA_TO_DEVICE;
break;
case DMA_MODE_CASCADE:
mode |= ISA_DMA_MODE_CASCADE;
direction = PCI_DMA_BIDIRECTIONAL;
direction = DMA_BIDIRECTIONAL;
break;
default:
direction = PCI_DMA_NONE;
direction = DMA_NONE;
break;
}
if (!dma->using_sg) {
if (!dma->sg) {
/*
* Cope with ISA-style drivers which expect cache
* coherence.
*/
dma->buf.dma_address = pci_map_single(NULL,
dma->buf.__address, dma->buf.length,
dma->sg = &dma->buf;
dma->sgcount = 1;
dma->buf.length = dma->count;
dma->buf.dma_address = dma_map_single(NULL,
dma->addr, dma->count,
direction);
}
......
......@@ -12,8 +12,6 @@
* DMA facilities.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
......@@ -23,8 +21,7 @@
#include <asm/mach/dma.h>
DEFINE_SPINLOCK(dma_spin_lock);
#if MAX_DMA_CHANNELS > 0
EXPORT_SYMBOL(dma_spin_lock);
static dma_t dma_chan[MAX_DMA_CHANNELS];
......@@ -81,6 +78,7 @@ int request_dma(dmach_t channel, const char *device_id)
busy:
return -EBUSY;
}
EXPORT_SYMBOL(request_dma);
/*
* Free DMA channel
......@@ -112,6 +110,7 @@ void free_dma(dmach_t channel)
bad_dma:
printk(KERN_ERR "dma: trying to free DMA%d\n", channel);
}
EXPORT_SYMBOL(free_dma);
/* Set DMA Scatter-Gather list
*/
......@@ -125,15 +124,15 @@ void set_dma_sg (dmach_t channel, struct scatterlist *sg, int nr_sg)
dma->sg = sg;
dma->sgcount = nr_sg;
dma->using_sg = 1;
dma->invalid = 1;
}
EXPORT_SYMBOL(set_dma_sg);
/* Set DMA address
*
* Copy address to the structure, and set the invalid bit
*/
void set_dma_addr (dmach_t channel, unsigned long physaddr)
void __set_dma_addr (dmach_t channel, void *addr)
{
dma_t *dma = dma_chan + channel;
......@@ -141,12 +140,11 @@ void set_dma_addr (dmach_t channel, unsigned long physaddr)
printk(KERN_ERR "dma%d: altering DMA address while "
"DMA active\n", channel);
dma->sg = &dma->buf;
dma->sgcount = 1;
dma->buf.__address = bus_to_virt(physaddr);
dma->using_sg = 0;
dma->sg = NULL;
dma->addr = addr;
dma->invalid = 1;
}
EXPORT_SYMBOL(__set_dma_addr);
/* Set DMA byte count
*
......@@ -160,12 +158,11 @@ void set_dma_count (dmach_t channel, unsigned long count)
printk(KERN_ERR "dma%d: altering DMA count while "
"DMA active\n", channel);
dma->sg = &dma->buf;
dma->sgcount = 1;
dma->buf.length = count;
dma->using_sg = 0;
dma->sg = NULL;
dma->count = count;
dma->invalid = 1;
}
EXPORT_SYMBOL(set_dma_count);
/* Set DMA direction mode
*/
......@@ -180,6 +177,7 @@ void set_dma_mode (dmach_t channel, dmamode_t mode)
dma->dma_mode = mode;
dma->invalid = 1;
}
EXPORT_SYMBOL(set_dma_mode);
/* Enable DMA channel
*/
......@@ -200,6 +198,7 @@ void enable_dma (dmach_t channel)
printk(KERN_ERR "dma%d: trying to enable free DMA\n", channel);
BUG();
}
EXPORT_SYMBOL(enable_dma);
/* Disable DMA channel
*/
......@@ -220,6 +219,7 @@ void disable_dma (dmach_t channel)
printk(KERN_ERR "dma%d: trying to disable free DMA\n", channel);
BUG();
}
EXPORT_SYMBOL(disable_dma);
/*
* Is the specified DMA channel active?
......@@ -233,6 +233,7 @@ void set_dma_page(dmach_t channel, char pagenr)
{
printk(KERN_ERR "dma%d: trying to set_dma_page\n", channel);
}
EXPORT_SYMBOL(set_dma_page);
void set_dma_speed(dmach_t channel, int cycle_ns)
{
......@@ -243,6 +244,7 @@ void set_dma_speed(dmach_t channel, int cycle_ns)
ret = dma->d_ops->setspeed(channel, dma, cycle_ns);
dma->speed = ret;
}
EXPORT_SYMBOL(set_dma_speed);
int get_dma_residue(dmach_t channel)
{
......@@ -254,49 +256,12 @@ int get_dma_residue(dmach_t channel)
return ret;
}
EXPORT_SYMBOL(get_dma_residue);
void __init init_dma(void)
static int __init init_dma(void)
{
arch_dma_init(dma_chan);
}
#else
int request_dma(dmach_t channel, const char *device_id)
{
return -EINVAL;
}
int get_dma_residue(dmach_t channel)
{
return 0;
}
#define GLOBAL_ALIAS(_a,_b) asm (".set " #_a "," #_b "; .globl " #_a)
GLOBAL_ALIAS(disable_dma, get_dma_residue);
GLOBAL_ALIAS(enable_dma, get_dma_residue);
GLOBAL_ALIAS(free_dma, get_dma_residue);
GLOBAL_ALIAS(get_dma_list, get_dma_residue);
GLOBAL_ALIAS(set_dma_mode, get_dma_residue);
GLOBAL_ALIAS(set_dma_page, get_dma_residue);
GLOBAL_ALIAS(set_dma_count, get_dma_residue);
GLOBAL_ALIAS(set_dma_addr, get_dma_residue);
GLOBAL_ALIAS(set_dma_sg, get_dma_residue);
GLOBAL_ALIAS(set_dma_speed, get_dma_residue);
GLOBAL_ALIAS(init_dma, get_dma_residue);
#endif
EXPORT_SYMBOL(request_dma);
EXPORT_SYMBOL(free_dma);
EXPORT_SYMBOL(enable_dma);
EXPORT_SYMBOL(disable_dma);
EXPORT_SYMBOL(set_dma_addr);
EXPORT_SYMBOL(set_dma_count);
EXPORT_SYMBOL(set_dma_mode);
EXPORT_SYMBOL(set_dma_page);
EXPORT_SYMBOL(get_dma_residue);
EXPORT_SYMBOL(set_dma_sg);
EXPORT_SYMBOL(set_dma_speed);
EXPORT_SYMBOL(dma_spin_lock);
core_initcall(init_dma);
......@@ -18,8 +18,6 @@
#include <asm/memory.h>
#include <asm/glue.h>
#include <asm/vfpmacros.h>
#include <asm/hardware.h> /* should be moved into entry-macro.S */
#include <asm/arch/irqs.h> /* should be moved into entry-macro.S */
#include <asm/arch/entry-macro.S>
#include "entry-header.S"
......
......@@ -33,6 +33,8 @@
#define MACHINFO_PGOFFIO 12
#define MACHINFO_NAME 16
#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_ADDR. Therefore, we must
......
......@@ -1027,7 +1027,6 @@ void __init init_irq_proc(void)
void __init init_IRQ(void)
{
struct irqdesc *desc;
extern void init_dma(void);
int irq;
#ifdef CONFIG_SMP
......@@ -1041,7 +1040,6 @@ void __init init_IRQ(void)
}
init_arch_irq();
init_dma();
}
static int __init noirqdebug_setup(char *str)
......
......@@ -28,10 +28,9 @@
#include <linux/init.h>
#include <linux/cpu.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/mach/time.h>
......
......@@ -26,8 +26,6 @@
#include <asm/cpu.h>
#include <asm/elf.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/procinfo.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
......
......@@ -29,9 +29,6 @@
#include <linux/sysdev.h>
#include <linux/timer.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/thread_info.h>
#include <asm/mach/time.h>
......
......@@ -23,7 +23,6 @@
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
......
......@@ -17,15 +17,13 @@ jiffies = jiffies_64;
jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
#ifdef CONFIG_XIP_KERNEL
#define TEXTADDR XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
#else
#define TEXTADDR KERNEL_RAM_ADDR
. = PAGE_OFFSET + TEXT_OFFSET;
#endif
SECTIONS
{
. = TEXTADDR;
.init : { /* Init code and data */
_stext = .;
_sinittext = .;
......@@ -104,7 +102,7 @@ SECTIONS
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = KERNEL_RAM_ADDR;
. = PAGE_OFFSET + TEXT_OFFSET;
#else
. = ALIGN(THREAD_SIZE);
__data_loc = .;
......
......@@ -15,9 +15,9 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include "clock.h"
......@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
......
......@@ -20,11 +20,11 @@
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
......
......@@ -9,7 +9,7 @@
*
*/
#include <asm/hardware/amba_clcd.h>
#include <linux/amba/clcd.h>
struct sys_timer;
......
/*
* linux/arch/arm/mach-clps711x/dma.c
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <asm/dma.h>
#include <asm/mach/dma.h>
void __init arch_dma_init(dma_t *dma)
{
}
/*
* linux/arch/arm/mach-epxa10db/dma.c
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <asm/dma.h>
#include <asm/mach/dma.h>
void __init arch_dma_init(dma_t *dma)
{
}
......@@ -15,6 +15,7 @@
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
#include <asm/mach/dma.h>
#include <asm/hardware/dec21285.h>
......
......@@ -29,27 +29,27 @@
#include "generic.h"
#include <asm/serial.h>
static struct resource mx1ads_resources[] = {
static struct resource cs89x0_resources[] = {
[0] = {
.start = IMX_CS4_VIRT,
.end = IMX_CS4_VIRT + 16,
.start = IMX_CS4_PHYS + 0x300,
.end = IMX_CS4_PHYS + 0x300 + 16,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 13,
.end = 13,
.start = IRQ_GPIOC(17),
.end = IRQ_GPIOC(17),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mx1ads_device = {
.name = "mx1ads",
.num_resources = ARRAY_SIZE(mx1ads_resources),
.resource = mx1ads_resources,
static struct platform_device cs89x0_device = {
.name = "cirrus-cs89x0",
.num_resources = ARRAY_SIZE(cs89x0_resources),
.resource = cs89x0_resources,
};
static struct platform_device *devices[] __initdata = {
&mx1ads_device,
&cs89x0_device,
};
static void __init
......@@ -61,45 +61,10 @@ mx1ads_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc mx1ads_io_desc[] __initdata = {
{
.virtual = IMX_CS0_VIRT,
.pfn = __phys_to_pfn(IMX_CS0_PHYS),
.length = IMX_CS0_SIZE,
.type = MT_DEVICE
}, {
.virtual = IMX_CS1_VIRT,
.pfn = __phys_to_pfn(IMX_CS1_PHYS),
.length = IMX_CS1_SIZE,
.type = MT_DEVICE
}, {
.virtual = IMX_CS2_VIRT,
.pfn = __phys_to_pfn(IMX_CS2_PHYS),
.length = IMX_CS2_SIZE,
.type = MT_DEVICE
}, {
.virtual = IMX_CS3_VIRT,
.pfn = __phys_to_pfn(IMX_CS3_PHYS),
.length = IMX_CS3_SIZE,
.type = MT_DEVICE
}, {
.virtual = IMX_CS4_VIRT,
.pfn = __phys_to_pfn(IMX_CS4_PHYS),
.length = IMX_CS4_SIZE,
.type = MT_DEVICE
}, {
.virtual = IMX_CS5_VIRT,
.pfn = __phys_to_pfn(IMX_CS5_PHYS),
.length = IMX_CS5_SIZE,
.type = MT_DEVICE
}
};
static void __init
mx1ads_map_io(void)
{
imx_map_io();
iotable_init(mx1ads_io_desc, ARRAY_SIZE(mx1ads_io_desc));
}
MACHINE_START(MX1ADS, "Motorola MX1ADS")
......
......@@ -14,9 +14,9 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/icst525.h>
#include "clock.h"
......@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
......
......@@ -15,11 +15,11 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/arm_timer.h>
#include <asm/arch/cm.h>
#include <asm/system.h>
......
/*
* linux/arch/arm/mach-integrator/dma.c
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/mach/dma.h>
void __init arch_dma_init(dma_t *dma)
{
}
......@@ -18,11 +18,11 @@
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <asm/io.h>
#include <asm/hardware/icst525.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/arch/lm.h>
#include <asm/arch/impd1.h>
#include <asm/sizes.h>
......
......@@ -25,6 +25,8 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <asm/hardware.h>
#include <asm/io.h>
......@@ -32,8 +34,6 @@
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_kmi.h>
#include <asm/arch/lm.h>
......
......@@ -16,15 +16,15 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_kmi.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/icst525.h>
#include <asm/arch/cm.h>
......
......@@ -14,8 +14,8 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/hardware/amba.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/uaccess.h>
......
......@@ -18,7 +18,7 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/pgtable.h>
......@@ -50,32 +50,74 @@ static struct map_desc iop331_std_desc[] __initdata = {
}
};
static struct uart_port iop331_serial_ports[] = {
{
.membase = (char*)(IOP331_UART0_VIRT),
.mapbase = (IOP331_UART0_PHYS),
.irq = IRQ_IOP331_UART0,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IOP331_UART_XTAL,
.line = 0,
.type = PORT_XSCALE,
.fifosize = 32
} , {
.membase = (char*)(IOP331_UART1_VIRT),
.mapbase = (IOP331_UART1_PHYS),
.irq = IRQ_IOP331_UART1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IOP331_UART_XTAL,
.line = 1,
.type = PORT_XSCALE,
.fifosize = 32
static struct resource iop33x_uart0_resources[] = {
[0] = {
.start = IOP331_UART0_PHYS,
.end = IOP331_UART0_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART0,
.end = IRQ_IOP331_UART0,
.flags = IORESOURCE_IRQ
}
};
static struct resource iop33x_uart1_resources[] = {
[0] = {
.start = IOP331_UART1_PHYS,
.end = IOP331_UART1_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART1,
.end = IRQ_IOP331_UART1,
.flags = IORESOURCE_IRQ
}
};
static struct plat_serial8250_port iop33x_uart0_data[] = {
{
.membase = (char*)(IOP331_UART0_VIRT),
.mapbase = (IOP331_UART0_PHYS),
.irq = IRQ_IOP331_UART0,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
static struct plat_serial8250_port iop33x_uart1_data[] = {
{
.membase = (char*)(IOP331_UART1_VIRT),
.mapbase = (IOP331_UART1_PHYS),
.irq = IRQ_IOP331_UART1,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
static struct platform_device iop33x_uart0 = {
.name = "serial8250",
.id = 0,
.dev.platform_data = iop33x_uart0_data,
.num_resources = 2,
.resource = iop33x_uart0_resources,
};
static struct platform_device iop33x_uart1 = {
.name = "serial8250",
.id = 1,
.dev.platform_data = iop33x_uart1_data,
.num_resources = 2,
.resource = iop33x_uart1_resources,
};
static struct resource iop33x_i2c_0_resources[] = {
[0] = {
.start = 0xfffff680,
......@@ -117,6 +159,8 @@ static struct platform_device iop33x_i2c_1_controller = {
};
static struct platform_device *iop33x_devices[] __initdata = {
&iop33x_uart0,
&iop33x_uart1,
&iop33x_i2c_0_controller,
&iop33x_i2c_1_controller
};
......@@ -133,8 +177,6 @@ void __init iop33x_init(void)
void __init iop331_map_io(void)
{
iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
early_serial_setup(&iop331_serial_ports[0]);
early_serial_setup(&iop331_serial_ports[1]);
}
#ifdef CONFIG_ARCH_IOP331
......
......@@ -71,6 +71,14 @@ config ARCH_PRPMC1100
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/IXP4xx>.
config MACH_NAS100D
bool
prompt "NAS100D"
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
#
# Avila and IXDP share the same source for now. Will change in future
#
......
......@@ -9,4 +9,5 @@ obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o
......@@ -341,6 +341,29 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
}
/*
* Only first 64MB of memory can be accessed via PCI.
* We use GFP_DMA to allocate safe buffers to do map/unmap.
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
/*
* Only adjust if > 64M on current system
*/
if (node || (zone_size[0] <= sz))
return;
zone_size[1] = zone_size[0] - sz;
zone_size[0] = sz;
zhole_size[1] = zhole_size[0];
zhole_size[0] = 0;
}
void __init ixp4xx_pci_preinit(void)
{
unsigned long processor_id;
......
......@@ -142,6 +142,8 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
*IXP4XX_GPIO_GPISR = (1 << line);
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
......@@ -169,7 +171,7 @@ static void ixp4xx_irq_ack(unsigned int irq)
int line = (irq < 32) ? irq2gpio[irq] : -1;
if (line >= 0)
gpio_line_isr_clear(line);
*IXP4XX_GPIO_GPISR = (1 << line);
}
/*
......@@ -330,11 +332,27 @@ static struct platform_device *ixp46x_devices[] __initdata = {
&ixp46x_i2c_controller
};
unsigned long ixp4xx_exp_bus_size;
void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
if (cpu_is_ixp46x()) {
int region;
platform_add_devices(ixp46x_devices,
ARRAY_SIZE(ixp46x_devices));
for (region = 0; region < 7; region++) {
if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
ixp4xx_exp_bus_size = SZ_32M;
break;
}
}
}
printk("IXP4xx: Using %uMiB expansion bus window size\n",
ixp4xx_exp_bus_size >> 20);
}
......@@ -33,9 +33,6 @@ void __init coyote_pci_preinit(void)
set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);
ixp4xx_pci_preinit();
}
......
......@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -30,8 +31,6 @@ static struct flash_platform_data coyote_flash_data = {
};
static struct resource coyote_flash_resource = {
.start = COYOTE_FLASH_BASE,
.end = COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
......@@ -81,6 +80,11 @@ static struct platform_device *coyote_devices[] __initdata = {
static void __init coyote_init(void)
{
ixp4xx_sys_init();
coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
......@@ -91,8 +95,6 @@ static void __init coyote_init(void)
coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
}
ixp4xx_sys_init();
platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
}
......
......@@ -27,6 +27,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -106,11 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
.width = 2,
};
static struct resource gtwx5715_flash_resource = {
.start = GTWX5715_FLASH_BASE,
.end = GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
static struct gtw5715_flash_resource = {
.flags = IORESOURCE_MEM,
};
}
static struct platform_device gtwx5715_flash = {
.name = "IXP4XX-Flash",
......@@ -129,6 +128,14 @@ static struct platform_device *gtwx5715_devices[] __initdata = {
static void __init gtwx5715_init(void)
{
ixp4xx_sys_init();
if (!flash_resource)
printk(KERN_ERR "Could not allocate flash resource\n");
gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
}
......
......@@ -32,11 +32,6 @@ void __init ixdp425_pci_preinit(void)
set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);
gpio_line_isr_clear(IXDP425_PCI_INTC_PIN);
gpio_line_isr_clear(IXDP425_PCI_INTD_PIN);
ixp4xx_pci_preinit();
}
......
......@@ -14,6 +14,7 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -30,8 +31,6 @@ static struct flash_platform_data ixdp425_flash_data = {
};
static struct resource ixdp425_flash_resource = {
.start = IXDP425_FLASH_BASE,
.end = IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
......@@ -108,17 +107,13 @@ static struct platform_device *ixdp425_devices[] __initdata = {
&ixdp425_uart
};
static void __init ixdp425_init(void)
{
ixp4xx_sys_init();
/*
* IXP465 has 32MB window
*/
if (machine_is_ixdp465()) {
ixdp425_flash_resource.end += IXDP425_FLASH_SIZE;
}
ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
ixdp425_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
}
......
......@@ -32,9 +32,6 @@ void __init ixdpg425_pci_preinit(void)
set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
gpio_line_isr_clear(6);
gpio_line_isr_clear(7);
ixp4xx_pci_preinit();
}
......
/*
* arch/arm/mach-ixp4xx/nas100d-pci.c
*
* NAS 100d board-level PCI initialization
*
* based on ixdp425-pci.c:
* Copyright (C) 2002 Intel Corporation.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* Maintainer: http://www.nslu2-linux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
void __init nas100d_pci_preinit(void)
{
set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
ixp4xx_pci_preinit();
}
static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] =
{
{ IRQ_NAS100D_PCI_INTA, -1, -1 },
{ IRQ_NAS100D_PCI_INTB, -1, -1 },
{ IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE },
};
int irq = -1;
if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV &&
pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES)
irq = pci_irq_table[slot-1][pin-1];
return irq;
}
struct hw_pci __initdata nas100d_pci = {
.nr_controllers = 1,
.preinit = nas100d_pci_preinit,
.swizzle = pci_std_swizzle,
.setup = ixp4xx_setup,
.scan = ixp4xx_scan_bus,
.map_irq = nas100d_map_irq,
};
int __init nas100d_pci_init(void)
{
if (machine_is_nas100d())
pci_common_init(&nas100d_pci);
return 0;
}
subsys_initcall(nas100d_pci_init);
/*
* arch/arm/mach-ixp4xx/nas100d-power.c
*
* NAS 100d Power/Reset driver
*
* Copyright (C) 2005 Tower Technologies
*
* based on nas100d-io.c
* Copyright (C) 2004 Karen Spearel
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Maintainers: http://www.nslu2-linux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
#include <asm/mach-types.h>
extern void ctrl_alt_del(void);
static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs)
{
/* Signal init to do the ctrlaltdel action, this will bypass init if
* it hasn't started and do a kernel_restart.
*/
ctrl_alt_del();
return IRQ_HANDLED;
}
static int __init nas100d_power_init(void)
{
if (!(machine_is_nas100d()))
return 0;
set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
SA_INTERRUPT, "NAS100D reset button", NULL) < 0) {
printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
NAS100D_RB_IRQ);
return -EIO;
}
return 0;
}
static void __exit nas100d_power_exit(void)
{
free_irq(NAS100D_RB_IRQ, NULL);
}
module_init(nas100d_power_init);
module_exit(nas100d_power_exit);
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("NAS100D Power/Reset driver");
MODULE_LICENSE("GPL");
/*
* arch/arm/mach-ixp4xx/nas100d-setup.c
*
* NAS 100d board-setup
*
* based ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Author: Rod Whitby <rod@whitby.id.au>
* Maintainers: http://www.nslu2-linux.org/
*
*/
#include <linux/kernel.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
static struct flash_platform_data nas100d_flash_data = {
.map_name = "cfi_probe",
.width = 2,
};
static struct resource nas100d_flash_resource = {
.flags = IORESOURCE_MEM,
};
static struct platform_device nas100d_flash = {
.name = "IXP4XX-Flash",
.id = 0,
.dev.platform_data = &nas100d_flash_data,
.num_resources = 1,
.resource = &nas100d_flash_resource,
};
static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = {
.sda_pin = NAS100D_SDA_PIN,
.scl_pin = NAS100D_SCL_PIN,
};
static struct platform_device nas100d_i2c_controller = {
.name = "IXP4XX-I2C",
.id = 0,
.dev.platform_data = &nas100d_i2c_gpio_pins,
.num_resources = 0,
};
static struct resource nas100d_uart_resources[] = {
{
.start = IXP4XX_UART1_BASE_PHYS,
.end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
},
{
.start = IXP4XX_UART2_BASE_PHYS,
.end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
.flags = IORESOURCE_MEM,
}
};
static struct plat_serial8250_port nas100d_uart_data[] = {
{
.mapbase = IXP4XX_UART1_BASE_PHYS,
.membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART1,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{
.mapbase = IXP4XX_UART2_BASE_PHYS,
.membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
.irq = IRQ_IXP4XX_UART2,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = IXP4XX_UART_XTAL,
},
{ }
};
static struct platform_device nas100d_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev.platform_data = nas100d_uart_data,
.num_resources = 2,
.resource = nas100d_uart_resources,
};
static struct platform_device *nas100d_devices[] __initdata = {
&nas100d_i2c_controller,
&nas100d_flash,
&nas100d_uart,
};
static void nas100d_power_off(void)
{
/* This causes the box to drop the power and go dead. */
/* enable the pwr cntl gpio */
gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
/* do the deed */
gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
}
static void __init nas100d_init(void)
{
ixp4xx_sys_init();
nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
pm_power_off = nas100d_power_off;
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
}
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
.phys_ram = PHYS_OFFSET,
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = nas100d_init,
MACHINE_END
......@@ -28,14 +28,6 @@ void __init nslu2_pci_preinit(void)
set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
gpio_line_isr_clear(NSLU2_PCI_INTA_PIN);
gpio_line_isr_clear(NSLU2_PCI_INTB_PIN);
gpio_line_isr_clear(NSLU2_PCI_INTC_PIN);
/* INTD is not configured as GPIO is used
* for the power input button.
*/
ixp4xx_pci_preinit();
}
......
......@@ -54,9 +54,6 @@ static int __init nslu2_power_init(void)
set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
gpio_line_isr_clear(NSLU2_RB_GPIO);
gpio_line_isr_clear(NSLU2_PB_GPIO);
if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
SA_INTERRUPT, "NSLU2 reset button", NULL) < 0) {
......
......@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
......@@ -30,7 +31,6 @@
#include <asm/arch/usb.h>
#include <asm/arch/board.h>
#include <asm/arch/common.h>
#include <asm/hardware/clock.h>
static void __init omap_generic_init_irq(void)
{
......
......@@ -16,9 +16,9 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/usb.h>
#include <asm/arch/clock.h>
......
......@@ -17,10 +17,10 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/hardware/clock.h>
#include <asm/arch/board.h>
#include <asm/arch/mux.h>
......
......@@ -22,10 +22,10 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/prcm.h>
......
......@@ -16,9 +16,9 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/common.h>
#include <asm/arch/board.h>
......
......@@ -21,10 +21,11 @@
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/mach/time.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#define OMAP2_GP_TIMER1_BASE 0x48028000
#define OMAP2_GP_TIMER2_BASE 0x4802a000
......
......@@ -112,12 +112,14 @@ config IWMMXT
config PXA_SHARP_C7xx
bool
select PXA_SSP
select SHARPSL_PM
help
Enable support for all Sharp C7xx models
config PXA_SHARP_Cxx00
bool
select PXA_SSP
select SHARPSL_PM
help
Enable common support for Sharp Cxx00 models
......
......@@ -33,19 +33,7 @@ static void corgi_charger_init(void)
pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
}
static void corgi_charge_led(int val)
{
if (val == SHARPSL_LED_ERROR) {
dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
} else if (val == SHARPSL_LED_ON) {
dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
} else {
dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
}
sharpsl_pm_pxa_init();
}
static void corgi_measure_temp(int on)
......@@ -138,15 +126,15 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
if (STATUS_AC_IN()) {
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
/* charge on */
dev_dbg(sharpsl_pm.dev, "ac insert\n");
sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
} else {
/* charge off */
dev_dbg(sharpsl_pm.dev, "ac remove\n");
CHARGE_LED_OFF();
CHARGE_OFF();
sharpsl_pm_led(SHARPSL_LED_OFF);
sharpsl_pm.machinfo->charge(0);
sharpsl_pm.charge_mode = CHRG_OFF;
}
}
......@@ -172,23 +160,39 @@ static unsigned long corgi_charger_wakeup(void)
return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
}
static int corgi_acin_status(void)
unsigned long corgipm_read_devdata(int type)
{
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
switch(type) {
case SHARPSL_STATUS_ACIN:
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
case SHARPSL_BATT_VOLT:
default:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
}
}
static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
.init = corgi_charger_init,
.exit = sharpsl_pm_pxa_remove,
.gpio_batlock = CORGI_GPIO_BAT_COVER,
.gpio_acin = CORGI_GPIO_AC_IN,
.gpio_batfull = CORGI_GPIO_CHRG_FULL,
.status_acin = corgi_acin_status,
.discharge = corgi_discharge,
.charge = corgi_charge,
.chargeled = corgi_charge_led,
.measure_temp = corgi_measure_temp,
.presuspend = corgi_presuspend,
.postsuspend = corgi_postsuspend,
.read_devdata = corgipm_read_devdata,
.charger_wakeup = corgi_charger_wakeup,
.should_wakeup = corgi_should_wakeup,
.bat_levels = 40,
......
......@@ -427,6 +427,12 @@ static void __init mainstone_init(void)
printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
mst_flash_data[0].name);
/* system bus arbiter setting
* - Core_Park
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
/*
* On Mainstone, we route AC97_SYSCLK via GPIO45 to
* the audio daughter card
......
/*
* SharpSL SSP Driver
* Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/hardware/sharpsl_pm.h>
/*
* SharpSL SSP Driver
*/
struct corgissp_machinfo {
int port;
int cs_lcdcon;
......@@ -14,18 +24,18 @@ struct corgissp_machinfo {
void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
/*
* SharpSL Backlight
*/
void corgi_bl_set_intensity(int intensity);
void spitz_bl_set_intensity(int intensity);
void akita_bl_set_intensity(int intensity);
/*
* SharpSL Touchscreen Driver
*/
unsigned long corgi_get_hsync_len(void);
unsigned long spitz_get_hsync_len(void);
void corgi_put_hsync(void);
......@@ -33,89 +43,22 @@ void spitz_put_hsync(void);
void corgi_wait_hsync(void);
void spitz_wait_hsync(void);
/*
* SharpSL Battery/PM Driver
*/
struct sharpsl_charger_machinfo {
void (*init)(void);
int gpio_acin;
int gpio_batfull;
int gpio_batlock;
int gpio_fatal;
int (*status_acin)(void);
void (*discharge)(int);
void (*discharge1)(int);
void (*charge)(int);
void (*chargeled)(int);
void (*measure_temp)(int);
void (*presuspend)(void);
void (*postsuspend)(void);
unsigned long (*charger_wakeup)(void);
int (*should_wakeup)(unsigned int resume_on_alarm);
int bat_levels;
struct battery_thresh *bat_levels_noac;
struct battery_thresh *bat_levels_acin;
int status_high_acin;
int status_low_acin;
int status_high_noac;
int status_low_noac;
};
struct battery_thresh {
int voltage;
int percentage;
};
struct battery_stat {
int ac_status; /* APM AC Present/Not Present */
int mainbat_status; /* APM Main Battery Status */
int mainbat_percent; /* Main Battery Percentage Charge */
int mainbat_voltage; /* Main Battery Voltage */
};
struct sharpsl_pm_status {
struct device *dev;
struct timer_list ac_timer;
struct timer_list chrg_full_timer;
int charge_mode;
#define CHRG_ERROR (-1)
#define CHRG_OFF (0)
#define CHRG_ON (1)
#define CHRG_DONE (2)
unsigned int flags;
#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
int full_count;
unsigned long charge_start_time;
struct sharpsl_charger_machinfo *machinfo;
struct battery_stat battstat;
};
/* MAX1111 Channel Definitions */
#define MAX1111_BATT_VOLT 4u
#define MAX1111_BATT_TEMP 2u
#define MAX1111_ACIN_VOLT 6u
extern struct sharpsl_pm_status sharpsl_pm;
extern struct battery_thresh spitz_battery_levels_acin[];
extern struct battery_thresh spitz_battery_levels_noac[];
void sharpsl_pm_pxa_init(void);
void sharpsl_pm_pxa_remove(void);
int sharpsl_pm_pxa_read_max1111(int channel);
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
#define SHARPSL_LED_ERROR 2
#define SHARPSL_LED_ON 1
#define SHARPSL_LED_OFF 0
#define CHARGE_ON() sharpsl_pm.machinfo->charge(1)
#define CHARGE_OFF() sharpsl_pm.machinfo->charge(0)
#define CHARGE_LED_ON() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ON)
#define CHARGE_LED_OFF() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_OFF)
#define CHARGE_LED_ERR() sharpsl_pm.machinfo->chargeled(SHARPSL_LED_ERROR)
#define DISCHARGE_ON() sharpsl_pm.machinfo->discharge(1)
#define DISCHARGE_OFF() sharpsl_pm.machinfo->discharge(0)
#define STATUS_AC_IN() sharpsl_pm.machinfo->status_acin()
#define STATUS_BATT_LOCKED() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock)
#define STATUS_CHRG_FULL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull)
#define STATUS_FATAL() READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal)
This diff is collapsed.
......@@ -36,6 +36,7 @@
#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
#include <asm/arch/udc.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/akita.h>
......@@ -126,10 +127,12 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
cpr &= ~0x0002;
if (device == SPITZ_PWR_SD)
cpr &= ~0x0004;
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
mdelay(1);
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
} else {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
}
}
}
......@@ -334,6 +337,35 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
};
/*
* USB Host (OHCI)
*/
static int spitz_ohci_init(struct device *dev)
{
/* Only Port 2 is connected */
pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
/* Setup USB Port 2 Output Control Register */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
UHCHR = (UHCHR) &
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
UHCRHDA |= UHCRHDA_NOCP;
return 0;
}
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
};
/*
* Irda
*/
......@@ -411,6 +443,7 @@ static void __init common_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&spitz_mci_platform_data);
pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
......
......@@ -33,19 +33,7 @@ static void spitz_charger_init(void)
{
pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
}
static void spitz_charge_led(int val)
{
if (val == SHARPSL_LED_ERROR) {
dev_dbg(sharpsl_pm.dev, "Charge LED Error\n");
} else if (val == SHARPSL_LED_ON) {
dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
} else {
dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
}
sharpsl_pm_pxa_init();
}
static void spitz_measure_temp(int on)
......@@ -92,7 +80,7 @@ static void spitz_discharge1(int on)
static void spitz_presuspend(void)
{
spitz_last_ac_status = STATUS_AC_IN();
spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
/* GPIO Sleep Register */
PGSR0 = 0x00144018;
......@@ -138,7 +126,7 @@ static void spitz_postsuspend(void)
static int spitz_should_wakeup(unsigned int resume_on_alarm)
{
int is_resume = 0;
int acin = STATUS_AC_IN();
int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
if (spitz_last_ac_status != acin) {
if (acin) {
......@@ -148,8 +136,8 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
} else {
/* charge off */
dev_dbg(sharpsl_pm.dev, "AC Removed\n");
CHARGE_LED_OFF();
CHARGE_OFF();
sharpsl_pm_led(SHARPSL_LED_OFF);
sharpsl_pm.machinfo->charge(0);
sharpsl_pm.charge_mode = CHRG_OFF;
}
spitz_last_ac_status = acin;
......@@ -175,25 +163,41 @@ static unsigned long spitz_charger_wakeup(void)
return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
}
static int spitz_acin_status(void)
unsigned long spitzpm_read_devdata(int type)
{
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
switch(type) {
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
case SHARPSL_STATUS_FATAL:
return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
case SHARPSL_ACIN_VOLT:
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
case SHARPSL_BATT_TEMP:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
case SHARPSL_BATT_VOLT:
default:
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
}
}
struct sharpsl_charger_machinfo spitz_pm_machinfo = {
.init = spitz_charger_init,
.exit = sharpsl_pm_pxa_remove,
.gpio_batlock = SPITZ_GPIO_BAT_COVER,
.gpio_acin = SPITZ_GPIO_AC_IN,
.gpio_batfull = SPITZ_GPIO_CHRG_FULL,
.gpio_fatal = SPITZ_GPIO_FATAL_BAT,
.status_acin = spitz_acin_status,
.discharge = spitz_discharge,
.discharge1 = spitz_discharge1,
.charge = spitz_charge,
.chargeled = spitz_charge_led,
.measure_temp = spitz_measure_temp,
.presuspend = spitz_presuspend,
.postsuspend = spitz_postsuspend,
.read_devdata = spitzpm_read_devdata,
.charger_wakeup = spitz_charger_wakeup,
.should_wakeup = spitz_should_wakeup,
.bat_levels = 40,
......
......@@ -13,9 +13,9 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/icst307.h>
#include "clock.h"
......@@ -57,17 +57,6 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
......
......@@ -24,14 +24,14 @@
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
......
......@@ -22,7 +22,8 @@
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
#include <asm/hardware/amba.h>
#include <linux/amba/bus.h>
#include <asm/leds.h>
#include <asm/io.h>
......
......@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
......@@ -30,7 +31,6 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
......
......@@ -13,7 +13,7 @@
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <asm/page.h>
#include <asm/dma.h>
......@@ -148,11 +148,14 @@ static void iomd_enable_dma(dmach_t channel, dma_t *dma)
* Cope with ISA-style drivers which expect cache
* coherence.
*/
if (!dma->using_sg) {
dma->buf.dma_address = pci_map_single(NULL,
dma->buf.__address, dma->buf.length,
if (!dma->sg) {
dma->sg = &dma->buf;
dma->sgcount = 1;
dma->buf.length = dma->count;
dma->buf.dma_address = dma_map_single(NULL,
dma->addr, dma->count,
dma->dma_mode == DMA_MODE_READ ?
PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
iomd_writeb(DMA_CR_C, dma_base + CR);
......@@ -239,7 +242,7 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
unsigned int fiqhandler_length;
struct pt_regs regs;
if (dma->using_sg)
if (dma->sg)
BUG();
if (dma->dma_mode == DMA_MODE_READ) {
......@@ -252,8 +255,8 @@ static void floppy_enable_dma(dmach_t channel, dma_t *dma)
fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
}
regs.ARM_r9 = dma->buf.length;
regs.ARM_r10 = (unsigned long)dma->buf.__address;
regs.ARM_r9 = dma->count;
regs.ARM_r10 = (unsigned long)dma->addr;
regs.ARM_fp = (unsigned long)FLOPPYDMA_BASE;
if (claim_fiq(&fh)) {
......
......@@ -34,16 +34,15 @@
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>
#include "clock.h"
......@@ -151,18 +150,6 @@ void clk_disable(struct clk *clk)
}
int clk_use(struct clk *clk)
{
atomic_inc(&clk->used);
return 0;
}
void clk_unuse(struct clk *clk)
{
atomic_dec(&clk->used);
}
unsigned long clk_get_rate(struct clk *clk)
{
if (IS_ERR(clk))
......@@ -196,8 +183,6 @@ EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
EXPORT_SYMBOL(clk_use);
EXPORT_SYMBOL(clk_unuse);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
......@@ -370,7 +355,6 @@ static struct clk init_clocks[] = {
int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
atomic_set(&clk->used, 0);
if (clk->enable == NULL)
clk->enable = clk_null_enable;
......
......@@ -16,7 +16,6 @@ struct clk {
struct clk *parent;
const char *name;
int id;
atomic_t used;
unsigned long rate;
unsigned long ctrlbit;
int (*enable)(struct clk *, int enable);
......
......@@ -29,16 +29,15 @@
#include <linux/err.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>
#include "clock.h"
......
......@@ -28,6 +28,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -36,7 +37,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-serial.h>
......
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/system.h>
#include <asm/leds.h>
......@@ -35,7 +36,6 @@
#include <asm/arch/regs-timer.h>
#include <asm/arch/regs-irq.h>
#include <asm/mach/time.h>
#include <asm/hardware/clock.h>
#include "clock.h"
#include "cpu.h"
......@@ -191,7 +191,6 @@ static void s3c2410_timer_setup (void)
if (IS_ERR(clk))
panic("failed to get clock for system timer");
clk_use(clk);
clk_enable(clk);
pclk = clk_get_rate(clk);
......
......@@ -134,30 +134,12 @@ unsigned long sleep_phys_sp(void *sp)
return virt_to_phys(sp);
}
/*
* Called after processes are frozen, but before we shut down devices.
*/
static int sa11x0_pm_prepare(suspend_state_t state)
{
return 0;
}
/*
* Called after devices are re-setup, but before processes are thawed.
*/
static int sa11x0_pm_finish(suspend_state_t state)
{
return 0;
}
/*
* Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
*/
static struct pm_ops sa11x0_pm_ops = {
.pm_disk_mode = PM_DISK_FIRMWARE,
.prepare = sa11x0_pm_prepare,
.enter = sa11x0_pm_enter,
.finish = sa11x0_pm_finish,
};
static int __init sa11x0_pm_init(void)
......
......@@ -14,9 +14,9 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/icst307.h>
#include "clock.h"
......@@ -58,17 +58,6 @@ void clk_disable(struct clk *clk)
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
......
......@@ -25,14 +25,14 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
......
......@@ -22,7 +22,7 @@
#ifndef __ASM_ARCH_VERSATILE_H
#define __ASM_ARCH_VERSATILE_H
#include <asm/hardware/amba.h>
#include <linux/amba/bus.h>
extern void __init versatile_init(void);
extern void __init versatile_init_irq(void);
......
......@@ -23,12 +23,12 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/mach/arch.h>
......
......@@ -23,12 +23,12 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/mach/arch.h>
#include <asm/mach/mmc.h>
......
......@@ -19,7 +19,6 @@
#include <linux/dma-mapping.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#define CONSISTENT_BASE (0xffc00000)
......
......@@ -9,10 +9,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/mmzone.h>
#include <linux/bootmem.h>
#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
......
......@@ -19,7 +19,6 @@
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/setup.h>
#include <asm/tlbflush.h>
......
......@@ -19,10 +19,10 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/arch/clock.h>
......
......@@ -18,12 +18,12 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/hardware/clock.h>
#include <asm/io.h>
#include <asm/setup.h>
......
......@@ -19,13 +19,12 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/hardware/clock.h>
/* TODO: Add support for SDRAM timing changes */
int omap_verify_speed(struct cpufreq_policy *policy)
......
......@@ -19,9 +19,9 @@
#include <linux/ptrace.h>
#include <linux/sysdev.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/hardware/clock.h>
#include <asm/irq.h>
#include <asm/arch/irqs.h>
#include <asm/arch/gpio.h>
......
......@@ -19,6 +19,7 @@
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/delay.h>
#include <asm/io.h>
......@@ -30,8 +31,6 @@
#include <asm/arch/dsp_common.h>
#include <asm/arch/mcbsp.h>
#include <asm/hardware/clock.h>
#ifdef CONFIG_MCBSP_DEBUG
#define DBG(x...) printk(x)
#else
......
......@@ -31,9 +31,9 @@
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/hardware.h>
#define OCPI_BASE 0xfffec320
......
......@@ -13,6 +13,7 @@ obj-$(CONFIG_ACPI) += acpi/
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
obj-$(CONFIG_ARM_AMBA) += amba/
# char/ comes before serial/ etc so that the VT console is the boot-time
# default.
......
obj-y += bus.o
......@@ -12,10 +12,10 @@
#include <linux/device.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/amba/bus.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/amba.h>
#include <asm/sizes.h>
#define to_amba_device(d) container_of(d, struct amba_device, dev)
......
......@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/uaccess.h>
......@@ -33,7 +34,6 @@
#include <asm/mach/time.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-rtc.h>
/* need this for the RTC_AF definitions */
......
......@@ -46,12 +46,12 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/arch/map.h>
#include <asm/hardware/clock.h>
#undef S3C24XX_VA_WATCHDOG
#define S3C24XX_VA_WATCHDOG (0)
......@@ -397,7 +397,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
return -ENOENT;
}
clk_use(wdt_clock);
clk_enable(wdt_clock);
/* see if we can actually set the requested timer margin, and if
......@@ -444,7 +443,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
if (wdt_clock != NULL) {
clk_disable(wdt_clock);
clk_unuse(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
}
......
......@@ -34,12 +34,12 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-iic.h>
#include <asm/arch/iic.h>
......@@ -738,7 +738,6 @@ static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c)
{
if (i2c->clk != NULL && !IS_ERR(i2c->clk)) {
clk_disable(i2c->clk);
clk_unuse(i2c->clk);
clk_put(i2c->clk);
i2c->clk = NULL;
}
......@@ -778,7 +777,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
clk_use(i2c->clk);
clk_enable(i2c->clk);
/* map the registers */
......
......@@ -19,12 +19,12 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_kmi.h>
#include <asm/hardware/clock.h>
#define KMI_BASE (kmi->base)
......@@ -72,13 +72,9 @@ static int amba_kmi_open(struct serio *io)
unsigned int divisor;
int ret;
ret = clk_use(kmi->clk);
if (ret)
goto out;
ret = clk_enable(kmi->clk);
if (ret)
goto clk_unuse;
goto out;
divisor = clk_get_rate(kmi->clk) / 8000000 - 1;
writeb(divisor, KMICLKDIV);
......@@ -97,8 +93,6 @@ static int amba_kmi_open(struct serio *io)
clk_disable:
clk_disable(kmi->clk);
clk_unuse:
clk_unuse(kmi->clk);
out:
return ret;
}
......@@ -111,7 +105,6 @@ static void amba_kmi_close(struct serio *io)
free_irq(kmi->irq, kmi);
clk_disable(kmi->clk);
clk_unuse(kmi->clk);
}
static int amba_kmi_probe(struct amba_device *dev, void *id)
......
......@@ -19,14 +19,14 @@
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/mach/mmc.h>
#include "mmci.h"
......@@ -494,13 +494,9 @@ static int mmci_probe(struct amba_device *dev, void *id)
goto host_free;
}
ret = clk_use(host->clk);
if (ret)
goto clk_free;
ret = clk_enable(host->clk);
if (ret)
goto clk_unuse;
goto clk_free;
host->plat = plat;
host->mclk = clk_get_rate(host->clk);
......@@ -573,8 +569,6 @@ static int mmci_probe(struct amba_device *dev, void *id)
iounmap(host->base);
clk_disable:
clk_disable(host->clk);
clk_unuse:
clk_unuse(host->clk);
clk_free:
clk_put(host->clk);
host_free:
......@@ -609,7 +603,6 @@ static int mmci_remove(struct amba_device *dev)
iounmap(host->base);
clk_disable(host->clk);
clk_unuse(host->clk);
clk_put(host->clk);
mmc_free_host(mmc);
......
......@@ -53,6 +53,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
......@@ -60,7 +61,6 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/hardware/clock.h>
#include <asm/arch/regs-nand.h>
#include <asm/arch/nand.h>
......@@ -460,7 +460,6 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
if (info->clk != NULL && !IS_ERR(info->clk)) {
clk_disable(info->clk);
clk_unuse(info->clk);
clk_put(info->clk);
}
......@@ -598,7 +597,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
goto exit_error;
}
clk_use(info->clk);
clk_enable(info->clk);
/* allocate and map the resource */
......
......@@ -36,9 +36,18 @@
struct scoop_pcmcia_config *platform_scoop_config;
#define SCOOP_DEV platform_scoop_config->devs
static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
{
struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr];
reset_scoop(scoopdev->dev);
/* Shared power controls need to be handled carefully */
if (platform_scoop_config->power_ctrl)
platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr);
else
write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000);
scoopdev->keep_vs = NO_KEEP_VS;
scoopdev->keep_rd = 0;
}
......@@ -208,26 +217,17 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
sharpsl_pcmcia_init_reset(skt);
/* Enable interrupt */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
if (machine_is_collie())
/* We need to disable SS_OUTPUT_ENA here. */
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
sharpsl_pcmcia_init_reset(skt);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
......
......@@ -47,12 +47,12 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_serial.h>
#define UART_NR 2
......
......@@ -47,12 +47,12 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/amba_serial.h>
#define UART_NR 14
......@@ -761,10 +761,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
goto unmap;
}
ret = clk_use(uap->clk);
if (ret)
goto putclk;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
......@@ -782,8 +778,6 @@ static int pl011_probe(struct amba_device *dev, void *id)
if (ret) {
amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
clk_unuse(uap->clk);
putclk:
clk_put(uap->clk);
unmap:
iounmap(base);
......@@ -808,7 +802,6 @@ static int pl011_remove(struct amba_device *dev)
amba_ports[i] = NULL;
iounmap(uap->port.membase);
clk_unuse(uap->clk);
clk_put(uap->clk);
kfree(uap);
return 0;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment