Commit 8a8d6bbe authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Linus Walleij

pinctrl: Get rid of duplicate of_node assignment in the drivers

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.comSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8df89a7c
......@@ -874,7 +874,6 @@ static int owl_gpio_init(struct owl_pinctrl *pctrl)
chip->label = dev_name(pctrl->dev);
chip->parent = pctrl->dev;
chip->owner = THIS_MODULE;
chip->of_node = pctrl->dev->of_node;
pctrl->irq_chip.name = chip->of_node->name;
pctrl->irq_chip.irq_ack = owl_gpio_irq_ack;
......
......@@ -1228,7 +1228,6 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
pc->gpio_chip = *pdata->gpio_chip;
pc->gpio_chip.parent = dev;
pc->gpio_chip.of_node = np;
for (i = 0; i < BCM2835_NUM_BANKS; i++) {
unsigned long events;
......
......@@ -836,7 +836,6 @@ static int iproc_gpio_probe(struct platform_device *pdev)
chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
gc->label = dev_name(dev);
gc->parent = dev;
gc->of_node = dev->of_node;
gc->request = iproc_gpio_request;
gc->free = iproc_gpio_free;
gc->direction_input = iproc_gpio_direction_input;
......
......@@ -648,7 +648,6 @@ static int nsp_gpio_probe(struct platform_device *pdev)
gc->ngpio = val;
gc->label = dev_name(dev);
gc->parent = dev;
gc->of_node = dev->of_node;
gc->request = gpiochip_generic_request;
gc->free = gpiochip_generic_free;
gc->direction_input = nsp_gpio_direction_input;
......
......@@ -1161,9 +1161,6 @@ static int lochnagar_pin_probe(struct platform_device *pdev)
priv->gpio_chip.can_sleep = true;
priv->gpio_chip.parent = dev;
priv->gpio_chip.base = -1;
#ifdef CONFIG_OF_GPIO
priv->gpio_chip.of_node = dev->of_node;
#endif
switch (lochnagar->type) {
case LOCHNAGAR1:
......
......@@ -519,7 +519,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
}
static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
{
struct gpio_chip *chip = &hw->chip;
int ret;
......@@ -536,7 +536,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
chip->set_config = mtk_gpio_set_config;
chip->base = -1;
chip->ngpio = hw->soc->npins;
chip->of_node = np;
chip->of_gpio_n_cells = 2;
ret = gpiochip_add_data(chip, hw);
......@@ -550,7 +549,7 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
* Documentation/devicetree/bindings/gpio/gpio.txt on how to
* bind pinctrl and gpio drivers via the "gpio-ranges" property.
*/
if (!of_find_property(np, "gpio-ranges", NULL)) {
if (!of_find_property(hw->dev->of_node, "gpio-ranges", NULL)) {
ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
chip->ngpio);
if (ret < 0) {
......@@ -691,7 +690,7 @@ int mtk_moore_pinctrl_probe(struct platform_device *pdev,
"Failed to add EINT, but pinctrl still can work\n");
/* Build gpiochip should be after pinctrl_enable is done */
err = mtk_build_gpiochip(hw, pdev->dev.of_node);
err = mtk_build_gpiochip(hw);
if (err) {
dev_err(&pdev->dev, "Failed to add gpio_chip\n");
return err;
......
......@@ -895,7 +895,7 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
}
static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
static int mtk_build_gpiochip(struct mtk_pinctrl *hw)
{
struct gpio_chip *chip = &hw->chip;
int ret;
......@@ -913,7 +913,6 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
chip->set_config = mtk_gpio_set_config;
chip->base = -1;
chip->ngpio = hw->soc->npins;
chip->of_node = np;
chip->of_gpio_n_cells = 2;
ret = gpiochip_add_data(chip, hw);
......@@ -1037,7 +1036,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
"Failed to add EINT, but pinctrl still can work\n");
/* Build gpiochip should be after pinctrl_enable is done */
err = mtk_build_gpiochip(hw, pdev->dev.of_node);
err = mtk_build_gpiochip(hw);
if (err) {
dev_err(&pdev->dev, "Failed to add gpio_chip\n");
return err;
......
......@@ -1009,9 +1009,6 @@ static int amd_gpio_probe(struct platform_device *pdev)
gpio_dev->gc.owner = THIS_MODULE;
gpio_dev->gc.parent = &pdev->dev;
gpio_dev->gc.ngpio = resource_size(res) / 4;
#if defined(CONFIG_OF_GPIO)
gpio_dev->gc.of_node = pdev->dev.of_node;
#endif
gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
gpio_dev->groups = kerncz_groups;
......
......@@ -1136,7 +1136,6 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
}
atmel_pioctrl->gpio_chip = &atmel_gpio_chip;
atmel_pioctrl->gpio_chip->of_node = dev->of_node;
atmel_pioctrl->gpio_chip->ngpio = atmel_pioctrl->npins;
atmel_pioctrl->gpio_chip->label = dev_name(dev);
atmel_pioctrl->gpio_chip->parent = dev;
......
......@@ -1868,7 +1868,6 @@ static int at91_gpio_probe(struct platform_device *pdev)
at91_chip->chip = at91_gpio_template;
chip = &at91_chip->chip;
chip->of_node = np;
chip->label = dev_name(&pdev->dev);
chip->parent = &pdev->dev;
chip->owner = THIS_MODULE;
......
......@@ -233,7 +233,7 @@ static void dc_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
spin_unlock_irqrestore(&pmap->lock, flags);
}
static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
static int dc_gpiochip_add(struct dc_pinmap *pmap)
{
struct gpio_chip *chip = &pmap->chip;
int ret;
......@@ -248,7 +248,6 @@ static int dc_gpiochip_add(struct dc_pinmap *pmap, struct device_node *np)
chip->set = dc_gpio_set;
chip->base = -1;
chip->ngpio = PINS_COUNT;
chip->of_node = np;
chip->of_gpio_n_cells = 2;
spin_lock_init(&pmap->lock);
......@@ -326,7 +325,7 @@ static int dc_pinctrl_probe(struct platform_device *pdev)
return PTR_ERR(pmap->pctl);
}
return dc_gpiochip_add(pmap, pdev->dev.of_node);
return dc_gpiochip_add(pmap);
}
static const struct of_device_id dc_pinctrl_ids[] = {
......
......@@ -551,7 +551,6 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
mcp->chip.set = mcp23s08_set;
#ifdef CONFIG_OF_GPIO
mcp->chip.of_gpio_n_cells = 2;
mcp->chip.of_node = dev->of_node;
#endif
mcp->chip.base = base;
......
......@@ -1748,7 +1748,6 @@ static int ocelot_gpiochip_register(struct platform_device *pdev,
gc->ngpio = info->desc->npins;
gc->parent = &pdev->dev;
gc->base = -1;
gc->of_node = info->dev->of_node;
gc->label = "ocelot-gpio";
irq = irq_of_parse_and_map(gc->of_node, 0);
......
......@@ -1232,7 +1232,6 @@ static int oxnas_gpio_probe(struct platform_device *pdev)
bank->id = id;
bank->gpio_chip.parent = &pdev->dev;
bank->gpio_chip.of_node = np;
bank->gpio_chip.ngpio = ngpios;
girq = &bank->gpio_chip.irq;
girq->chip = &bank->irq_chip;
......
......@@ -2241,7 +2241,7 @@ static int pic32_gpio_probe(struct platform_device *pdev)
}
bank->gpio_chip.parent = &pdev->dev;
bank->gpio_chip.of_node = np;
girq = &bank->gpio_chip.irq;
girq->chip = &bank->irq_chip;
girq->parent_handler = pic32_gpio_irq_handler;
......
......@@ -675,7 +675,6 @@ static int stmfx_pinctrl_probe(struct platform_device *pdev)
pctl->gpio_chip.base = -1;
pctl->gpio_chip.ngpio = pctl->pctl_desc.npins;
pctl->gpio_chip.can_sleep = true;
pctl->gpio_chip.of_node = np;
pctl->irq_chip.name = dev_name(pctl->dev);
pctl->irq_chip.irq_mask = stmfx_pinctrl_irq_mask;
......
......@@ -1163,9 +1163,6 @@ static int sx150x_probe(struct i2c_client *client,
pctl->gpio.set = sx150x_gpio_set;
pctl->gpio.set_config = gpiochip_generic_config;
pctl->gpio.parent = dev;
#ifdef CONFIG_OF_GPIO
pctl->gpio.of_node = dev->of_node;
#endif
pctl->gpio.can_sleep = true;
pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
if (!pctl->gpio.label)
......
......@@ -1763,7 +1763,6 @@ static int pinmux_xway_probe(struct platform_device *pdev)
/* register the gpio chip */
xway_chip.parent = &pdev->dev;
xway_chip.owner = THIS_MODULE;
xway_chip.of_node = pdev->dev.of_node;
ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
if (ret) {
dev_err(&pdev->dev, "Failed to register gpio chip\n");
......
......@@ -1264,7 +1264,6 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
chip->label = dev_name(pctrl->dev);
chip->parent = pctrl->dev;
chip->owner = THIS_MODULE;
chip->of_node = pctrl->dev->of_node;
if (msm_gpio_needs_valid_mask(pctrl))
chip->init_valid_mask = msm_gpio_init_valid_mask;
......
......@@ -773,7 +773,6 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev)
pctrl->chip = pm8xxx_gpio_template;
pctrl->chip.base = -1;
pctrl->chip.parent = &pdev->dev;
pctrl->chip.of_node = pdev->dev.of_node;
pctrl->chip.of_gpio_n_cells = 2;
pctrl->chip.label = dev_name(pctrl->dev);
pctrl->chip.ngpio = pctrl->npins;
......
......@@ -857,7 +857,6 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
pctrl->chip = pm8xxx_mpp_template;
pctrl->chip.base = -1;
pctrl->chip.parent = &pdev->dev;
pctrl->chip.of_node = pdev->dev.of_node;
pctrl->chip.of_gpio_n_cells = 2;
pctrl->chip.label = dev_name(pctrl->dev);
pctrl->chip.ngpio = pctrl->npins;
......
......@@ -240,7 +240,6 @@ static int rza2_gpio_register(struct rza2_pinctrl_priv *priv)
int ret;
chip.label = devm_kasprintf(priv->dev, GFP_KERNEL, "%pOFn", np);
chip.of_node = np;
chip.parent = priv->dev;
chip.ngpio = priv->npins;
......
......@@ -581,7 +581,6 @@ static int plgpio_probe(struct platform_device *pdev)
plgpio->chip.label = dev_name(&pdev->dev);
plgpio->chip.parent = &pdev->dev;
plgpio->chip.owner = THIS_MODULE;
plgpio->chip.of_node = pdev->dev.of_node;
if (!IS_ERR(plgpio->clk)) {
ret = clk_prepare(plgpio->clk);
......
......@@ -565,7 +565,6 @@ int wmt_pinctrl_probe(struct platform_device *pdev,
data->gpio_chip = wmt_gpio_chip;
data->gpio_chip.parent = &pdev->dev;
data->gpio_chip.of_node = pdev->dev.of_node;
data->gpio_chip.ngpio = data->nbanks * 32;
platform_set_drvdata(pdev, data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment