Commit 8ae4284e authored by Sunny Luo's avatar Sunny Luo Committed by Kevin Hilman

ARM64: dts: meson-axg: add the SPICC controller

Add DT info for the SPICC controller which found in
the Amlogic's Meson-AXG SoC.
Signed-off-by: default avatarSunny Luo <sunny.luo@amlogic.com>
Signed-off-by: default avatarYixun Lan <yixun.lan@amlogic.com>
Reviewed-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent 7bd46a79
......@@ -141,6 +141,28 @@ reset: reset-controller@1004 {
#reset-cells = <1>;
};
spicc0: spi@13000 {
compatible = "amlogic,meson-axg-spicc";
reg = <0x0 0x13000 0x0 0x3c>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_SPICC0>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spicc1: spi@15000 {
compatible = "amlogic,meson-axg-spicc";
reg = <0x0 0x15000 0x0 0x3c>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_SPICC1>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
reg = <0x0 0x24000 0x0 0x14>;
......@@ -299,6 +321,76 @@ mux {
function = "pwm_d";
};
};
spi0_pins: spi0 {
mux {
groups = "spi0_miso",
"spi0_mosi",
"spi0_clk";
function = "spi0";
};
};
spi0_ss0_pins: spi0_ss0 {
mux {
groups = "spi0_ss0";
function = "spi0";
};
};
spi0_ss1_pins: spi0_ss1 {
mux {
groups = "spi0_ss1";
function = "spi0";
};
};
spi0_ss2_pins: spi0_ss2 {
mux {
groups = "spi0_ss2";
function = "spi0";
};
};
spi1_a_pins: spi1_a {
mux {
groups = "spi1_miso_a",
"spi1_mosi_a",
"spi1_clk_a";
function = "spi1";
};
};
spi1_ss0_a_pins: spi1_ss0_a {
mux {
groups = "spi1_ss0_a";
function = "spi1";
};
};
spi1_ss1_pins: spi1_ss1 {
mux {
groups = "spi1_ss1";
function = "spi1";
};
};
spi1_x_pins: spi1_x {
mux {
groups = "spi1_miso_x",
"spi1_mosi_x",
"spi1_clk_x";
function = "spi1";
};
};
spi1_ss0_x_pins: spi1_ss0_x {
mux {
groups = "spi1_ss0_x";
function = "spi1";
};
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment