Skip to content

L
linux
Commit 8b080334 authored by Ville Syrjälä's avatar Ville Syrjälä
Browse files
Options

drm/i915: Clean up bxt/glk PLL registers 

Use REG_BIT() & co. for bxt/glk PLL registers.

v2: Reorder a few bits for consistency
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307233940.4161-4-ville.syrjala@linux.intel.comReviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 8e38c6b5
Hide whitespace changes
Inline Side-by-side
Showing with 57 additions and 52 deletions
drivers/gpu/drm/i915/display/intel_dpll_mgr.c
View file @ 8b080334
......@@ -1898,7 +1898,7 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv,
/* Write M2 integer */
temp = intel_de_read(dev_priv, BXT_PORT_PLL(phy, ch, 0));
temp &= ~PORT_PLL_M2_MASK;
temp &= ~PORT_PLL_M2_INT_MASK;
temp |= pll->state.hw_state.pll0;
intel_de_write(dev_priv, BXT_PORT_PLL(phy, ch, 0), temp);
......@@ -2034,7 +2034,7 @@ static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE;
hw_state->pll0 = intel_de_read(dev_priv, BXT_PORT_PLL(phy, ch, 0));
hw_state->pll0 &= PORT_PLL_M2_MASK;
hw_state->pll0 &= PORT_PLL_M2_INT_MASK;
hw_state->pll1 = intel_de_read(dev_priv, BXT_PORT_PLL(phy, ch, 1));
hw_state->pll1 &= PORT_PLL_N_MASK;
......@@ -2200,23 +2200,23 @@ static bool bxt_ddi_set_dpll_hw_state(struct intel_crtc_state *crtc_state,
lanestagger = 0x02;
dpll_hw_state->ebb0 = PORT_PLL_P1(clk_div->p1) | PORT_PLL_P2(clk_div->p2);
dpll_hw_state->pll0 = clk_div->m2_int;
dpll_hw_state->pll0 = PORT_PLL_M2_INT(clk_div->m2_int);
dpll_hw_state->pll1 = PORT_PLL_N(clk_div->n);
dpll_hw_state->pll2 = clk_div->m2_frac;
dpll_hw_state->pll2 = PORT_PLL_M2_FRAC(clk_div->m2_frac);
if (clk_div->m2_frac)
dpll_hw_state->pll3 = PORT_PLL_M2_FRAC_ENABLE;
dpll_hw_state->pll6 = prop_coef | PORT_PLL_INT_COEFF(int_coef);
dpll_hw_state->pll6 |= PORT_PLL_GAIN_CTL(gain_ctl);
dpll_hw_state->pll6 = PORT_PLL_PROP_COEFF(prop_coef) |
PORT_PLL_INT_COEFF(int_coef) |
PORT_PLL_GAIN_CTL(gain_ctl);
dpll_hw_state->pll8 = targ_cnt;
dpll_hw_state->pll8 = PORT_PLL_TARGET_CNT(targ_cnt);
dpll_hw_state->pll9 = 5 << PORT_PLL_LOCK_THRESHOLD_SHIFT;
dpll_hw_state->pll9 = PORT_PLL_LOCK_THRESHOLD(5);
dpll_hw_state->pll10 =
PORT_PLL_DCO_AMP(PORT_PLL_DCO_AMP_DEFAULT)
| PORT_PLL_DCO_AMP_OVR_EN_H;
dpll_hw_state->pll10 = PORT_PLL_DCO_AMP(15) |
PORT_PLL_DCO_AMP_OVR_EN_H;
dpll_hw_state->ebb4 = PORT_PLL_10BIT_CLK_ENABLE;
......@@ -2252,12 +2252,12 @@ static int bxt_ddi_pll_get_freq(struct drm_i915_private *i915,
struct dpll clock;
clock.m1 = 2;
clock.m2 = (pll_state->pll0 & PORT_PLL_M2_MASK) << 22;
clock.m2 = REG_FIELD_GET(PORT_PLL_M2_INT_MASK, pll_state->pll0) << 22;
if (pll_state->pll3 & PORT_PLL_M2_FRAC_ENABLE)
clock.m2 |= pll_state->pll2 & PORT_PLL_M2_FRAC_MASK;
clock.n = (pll_state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT;
clock.p1 = (pll_state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT;
clock.p2 = (pll_state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT;
clock.m2 |= REG_FIELD_GET(PORT_PLL_M2_FRAC_MASK, pll_state->pll2);
clock.n = REG_FIELD_GET(PORT_PLL_N_MASK, pll_state->pll1);
clock.p1 = REG_FIELD_GET(PORT_PLL_P1_MASK, pll_state->ebb0);
clock.p2 = REG_FIELD_GET(PORT_PLL_P2_MASK, pll_state->ebb0);
return chv_calc_dpll_params(i915->dpll.ref_clks.nssc, &clock);
}
......
drivers/gpu/drm/i915/gvt/handlers.c
View file @ 8b080334
......@@ -576,12 +576,17 @@ static u32 bxt_vgpu_get_dp_bitrate(struct intel_vgpu *vgpu, enum port port)
}
clock.m1 = 2;
clock.m2 = (vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 0)) & PORT_PLL_M2_MASK) << 22;
clock.m2 = REG_FIELD_GET(PORT_PLL_M2_INT_MASK,
vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 0))) << 22;
if (vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 3)) & PORT_PLL_M2_FRAC_ENABLE)
clock.m2 |= vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 2)) & PORT_PLL_M2_FRAC_MASK;
clock.n = (vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 1)) & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT;
clock.p1 = (vgpu_vreg_t(vgpu, BXT_PORT_PLL_EBB_0(phy, ch)) & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT;
clock.p2 = (vgpu_vreg_t(vgpu, BXT_PORT_PLL_EBB_0(phy, ch)) & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT;
clock.m2 |= REG_FIELD_GET(PORT_PLL_M2_FRAC_MASK,
vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 2)));
clock.n = REG_FIELD_GET(PORT_PLL_N_MASK,
vgpu_vreg_t(vgpu, BXT_PORT_PLL(phy, ch, 1)));
clock.p1 = REG_FIELD_GET(PORT_PLL_P1_MASK,
vgpu_vreg_t(vgpu, BXT_PORT_PLL_EBB_0(phy, ch)));
clock.p2 = REG_FIELD_GET(PORT_PLL_P2_MASK,
vgpu_vreg_t(vgpu, BXT_PORT_PLL_EBB_0(phy, ch)));
clock.m = clock.m1 * clock.m2;
clock.p = clock.p1 * clock.p2 * 5;
......
drivers/gpu/drm/i915/i915_reg.h
View file @ 8b080334
......@@ -644,22 +644,20 @@
#define _PORT_PLL_A 0x46074
#define _PORT_PLL_B 0x46078
#define _PORT_PLL_C 0x4607c
#define PORT_PLL_ENABLE (1 << 31)
#define PORT_PLL_LOCK (1 << 30)
#define PORT_PLL_REF_SEL (1 << 27)
#define PORT_PLL_POWER_ENABLE (1 << 26)
#define PORT_PLL_POWER_STATE (1 << 25)
#define PORT_PLL_ENABLE REG_BIT(31)
#define PORT_PLL_LOCK REG_BIT(30)
#define PORT_PLL_REF_SEL REG_BIT(27)
#define PORT_PLL_POWER_ENABLE REG_BIT(26)
#define PORT_PLL_POWER_STATE REG_BIT(25)
#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, _PORT_PLL_B)
#define _PORT_PLL_EBB_0_A 0x162034
#define _PORT_PLL_EBB_0_B 0x6C034
#define _PORT_PLL_EBB_0_C 0x6C340
#define PORT_PLL_P1_SHIFT 13
#define PORT_PLL_P1_MASK (0x07 << PORT_PLL_P1_SHIFT)
#define PORT_PLL_P1(x) ((x) << PORT_PLL_P1_SHIFT)
#define PORT_PLL_P2_SHIFT 8
#define PORT_PLL_P2_MASK (0x1f << PORT_PLL_P2_SHIFT)
#define PORT_PLL_P2(x) ((x) << PORT_PLL_P2_SHIFT)
#define PORT_PLL_P1_MASK REG_GENMASK(15, 13)
#define PORT_PLL_P1(p1) REG_FIELD_PREP(PORT_PLL_P1_MASK, (p1))
#define PORT_PLL_P2_MASK REG_GENMASK(12, 8)
#define PORT_PLL_P2(p2) REG_FIELD_PREP(PORT_PLL_P2_MASK, (p2))
#define BXT_PORT_PLL_EBB_0(phy, ch) _MMIO_BXT_PHY_CH(phy, ch, \
_PORT_PLL_EBB_0_B, \
_PORT_PLL_EBB_0_C)
......@@ -667,8 +665,8 @@
#define _PORT_PLL_EBB_4_A 0x162038
#define _PORT_PLL_EBB_4_B 0x6C038
#define _PORT_PLL_EBB_4_C 0x6C344
#define PORT_PLL_10BIT_CLK_ENABLE (1 << 13)
#define PORT_PLL_RECALIBRATE (1 << 14)
#define PORT_PLL_RECALIBRATE REG_BIT(14)
#define PORT_PLL_10BIT_CLK_ENABLE REG_BIT(13)
#define BXT_PORT_PLL_EBB_4(phy, ch) _MMIO_BXT_PHY_CH(phy, ch, \
_PORT_PLL_EBB_4_B, \
_PORT_PLL_EBB_4_C)
......@@ -677,31 +675,33 @@
#define _PORT_PLL_0_B 0x6C100
#define _PORT_PLL_0_C 0x6C380
/* PORT_PLL_0_A */
#define PORT_PLL_M2_MASK 0xFF
#define PORT_PLL_M2_INT_MASK REG_GENMASK(7, 0)
#define PORT_PLL_M2_INT(m2_int) REG_FIELD_PREP(PORT_PLL_M2_INT_MASK, (m2_int))
/* PORT_PLL_1_A */
#define PORT_PLL_N_SHIFT 8
#define PORT_PLL_N_MASK (0x0F << PORT_PLL_N_SHIFT)
#define PORT_PLL_N(x) ((x) << PORT_PLL_N_SHIFT)
#define PORT_PLL_N_MASK REG_GENMASK(11, 8)
#define PORT_PLL_N(n) REG_FIELD_PREP(PORT_PLL_N_MASK, (n))
/* PORT_PLL_2_A */
#define PORT_PLL_M2_FRAC_MASK 0x3FFFFF
#define PORT_PLL_M2_FRAC_MASK REG_GENMASK(21, 0)
#define PORT_PLL_M2_FRAC(m2_frac) REG_FIELD_PREP(PORT_PLL_M2_FRAC_MASK, (m2_frac))
/* PORT_PLL_3_A */
#define PORT_PLL_M2_FRAC_ENABLE (1 << 16)
#define PORT_PLL_M2_FRAC_ENABLE REG_BIT(16)
/* PORT_PLL_6_A */
#define PORT_PLL_PROP_COEFF_MASK 0xF
#define PORT_PLL_INT_COEFF_MASK (0x1F << 8)
#define PORT_PLL_INT_COEFF(x) ((x) << 8)
#define PORT_PLL_GAIN_CTL_MASK (0x07 << 16)
#define PORT_PLL_GAIN_CTL(x) ((x) << 16)
#define PORT_PLL_GAIN_CTL_MASK REG_GENMASK(18, 16)
#define PORT_PLL_GAIN_CTL(x) REG_FIELD_PREP(PORT_PLL_GAIN_CTL_MASK, (x))
#define PORT_PLL_INT_COEFF_MASK REG_GENMASK(12, 8)
#define PORT_PLL_INT_COEFF(x) REG_FIELD_PREP(PORT_PLL_INT_COEFF_MASK, (x))
#define PORT_PLL_PROP_COEFF_MASK REG_GENMASK(3, 0)
#define PORT_PLL_PROP_COEFF(x) REG_FIELD_PREP(PORT_PLL_PROP_COEFF_MASK, (x))
/* PORT_PLL_8_A */
#define PORT_PLL_TARGET_CNT_MASK 0x3FF
#define PORT_PLL_TARGET_CNT_MASK REG_GENMASK(9, 0)
#define PORT_PLL_TARGET_CNT(x) REG_FIELD_PREP(PORT_PLL_TARGET_CNT_MASK, (x))
/* PORT_PLL_9_A */
#define PORT_PLL_LOCK_THRESHOLD_SHIFT 1
#define PORT_PLL_LOCK_THRESHOLD_MASK (0x7 << PORT_PLL_LOCK_THRESHOLD_SHIFT)
#define PORT_PLL_LOCK_THRESHOLD_MASK REG_GENMASK(3, 1)
#define PORT_PLL_LOCK_THRESHOLD(x) REG_FIELD_PREP(PORT_PLL_LOCK_THRESHOLD_MASK, (x))
/* PORT_PLL_10_A */
#define PORT_PLL_DCO_AMP_OVR_EN_H (1 << 27)
#define PORT_PLL_DCO_AMP_DEFAULT 15
#define PORT_PLL_DCO_AMP_MASK 0x3c00
#define PORT_PLL_DCO_AMP(x) ((x) << 10)
#define PORT_PLL_DCO_AMP_OVR_EN_H REG_BIT(27)
#define PORT_PLL_DCO_AMP_MASK REG_GENMASK(13, 10)
#define PORT_PLL_DCO_AMP(x) REG_FIELD_PREP(PORT_PLL_DCO_AMP_MASK, (x))
#define _PORT_PLL_BASE(phy, ch) _BXT_PHY_CH(phy, ch, \
_PORT_PLL_0_B, \
_PORT_PLL_0_C)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7