Merge tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

MMC fixes for 3.3-rc4:
 * The most visible fix here is against a regression introduced in 3.3-rc1
   that ran cards in Ultra High Speed mode even when they failed to initialize
   in that mode, leading to lower-speed cards failing to mount.
 * A lockdep warning introduced in 3.3-rc1 is fixed.
 * Various other small driver fixes, most notably for a NULL dereference
   when using highmem with dw_mmc.

* tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: dw_mmc: Fix PIO mode with support of highmem
  mmc: atmel-mci: save and restore sdioirq when soft reset is performed
  mmc: block: Init ro_lock sysfs attr to fix lockdep warnings
  mmc: sh_mmcif: fix late delayed work initialisation
  mmc: tmio_mmc: fix card eject during IO with DMA
  mmc: core: Fix comparison issue in mmc_compare_ext_csds
  mmc: core: Fix PowerOff Notify suspend/resume
  mmc: sdhci-pci: set Medfield SDIO as non-removable
  mmc: core: add the capability for broken voltage
  mmc: core: Fix low speed mmc card detection failure
  mmc: esdhc: set the timeout to the max value
  mmc: esdhc: add PIO mode support
  mmc: core: Ensure clocks are always enabled before host interaction
  mmc: of_mmc_spi: fix little endian support
  mmc: core: UHS sdio card that fails should not exceed 50MHz
  mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3

drivers/mmc/card/block.c

@@ -1694,6 +1694,7 @@ static int mmc_add_disk(struct mmc_blk_data *md)
 
 		md->power_ro_lock.show = power_ro_lock_show;
 		md->power_ro_lock.store = power_ro_lock_store;
+		sysfs_attr_init(&md->power_ro_lock.attr);
 		md->power_ro_lock.attr.mode = mode;
 		md->power_ro_lock.attr.name =
 					"ro_lock_until_next_power_on";

drivers/mmc/core/core.c

@@ -290,8 +290,11 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
 static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
 		 bool is_first_req)
 {
-	if (host->ops->pre_req)
+	if (host->ops->pre_req) {
+		mmc_host_clk_hold(host);
 		host->ops->pre_req(host, mrq, is_first_req);
+		mmc_host_clk_release(host);
+	}
 }
 
 /**
@@ -306,8 +309,11 @@ static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
 static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
 			 int err)
 {
-	if (host->ops->post_req)
+	if (host->ops->post_req) {
+		mmc_host_clk_hold(host);
 		host->ops->post_req(host, mrq, err);
+		mmc_host_clk_release(host);
+	}
 }
 
 /**
@@ -620,7 +626,9 @@ int mmc_host_enable(struct mmc_host *host)
 		int err;
 
 		host->en_dis_recurs = 1;
+		mmc_host_clk_hold(host);
 		err = host->ops->enable(host);
+		mmc_host_clk_release(host);
 		host->en_dis_recurs = 0;
 
 		if (err) {
@@ -640,7 +648,9 @@ static int mmc_host_do_disable(struct mmc_host *host, int lazy)
 		int err;
 
 		host->en_dis_recurs = 1;
+		mmc_host_clk_hold(host);
 		err = host->ops->disable(host, lazy);
+		mmc_host_clk_release(host);
 		host->en_dis_recurs = 0;
 
 		if (err < 0) {
@@ -1121,6 +1131,10 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
 		 * might not allow this operation
 		 */
 		voltage = regulator_get_voltage(supply);
+
+		if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+			min_uV = max_uV = voltage;
+
 		if (voltage < 0)
 			result = voltage;
 		else if (voltage < min_uV || voltage > max_uV)
@@ -1203,8 +1217,11 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
 
 	host->ios.signal_voltage = signal_voltage;
 
-	if (host->ops->start_signal_voltage_switch)
+	if (host->ops->start_signal_voltage_switch) {
+		mmc_host_clk_hold(host);
 		err = host->ops->start_signal_voltage_switch(host, &host->ios);
+		mmc_host_clk_release(host);
+	}
 
 	return err;
 }
@@ -1239,6 +1256,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
 	int err = 0;
 
 	card = host->card;
+	mmc_claim_host(host);
 
 	/*
 	 * Send power notify command only if card
@@ -1269,6 +1287,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
 		/* Set the card state to no notification after the poweroff */
 		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
 	}
+	mmc_release_host(host);
 }
 
 /*
@@ -1327,12 +1346,28 @@ static void mmc_power_up(struct mmc_host *host)
 
 void mmc_power_off(struct mmc_host *host)
 {
+	int err = 0;
 	mmc_host_clk_hold(host);
 
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-	mmc_poweroff_notify(host);
+	/*
+	 * For eMMC 4.5 device send AWAKE command before
+	 * POWER_OFF_NOTIFY command, because in sleep state
+	 * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+	 */
+	if (host->card && mmc_card_is_sleep(host->card) &&
+	    host->bus_ops->resume) {
+		err = host->bus_ops->resume(host);
+
+		if (!err)
+			mmc_poweroff_notify(host);
+		else
+			pr_warning("%s: error %d during resume "
+				   "(continue with poweroff sequence)\n",
+				   mmc_hostname(host), err);
+	}
 
 	/*
 	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2386,12 +2421,6 @@ int mmc_suspend_host(struct mmc_host *host)
 		 */
 		if (mmc_try_claim_host(host)) {
 			if (host->bus_ops->suspend) {
-				/*
-				 * For eMMC 4.5 device send notify command
-				 * before sleep, because in sleep state eMMC 4.5
-				 * devices respond to only RESET and AWAKE cmd
-				 */
-				mmc_poweroff_notify(host);
 				err = host->bus_ops->suspend(host);
 			}
 			mmc_do_release_host(host);

drivers/mmc/core/host.h

@@ -14,27 +14,6 @@
 
 int mmc_register_host_class(void);
 void mmc_unregister_host_class(void);
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
-	return host->ios.clock;
-}
-#endif
-
 void mmc_host_deeper_disable(struct work_struct *work);
 
 #endif

drivers/mmc/core/mmc.c

@@ -376,7 +376,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	}
 
 	card->ext_csd.raw_hc_erase_gap_size =
-		ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+		ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
 	card->ext_csd.raw_sec_trim_mult =
 		ext_csd[EXT_CSD_SEC_TRIM_MULT];
 	card->ext_csd.raw_sec_erase_mult =
@@ -551,7 +551,7 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
 		goto out;
 
 	/* only compare read only fields */
-	err = (!(card->ext_csd.raw_partition_support ==
+	err = !((card->ext_csd.raw_partition_support ==
 			bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
 		(card->ext_csd.raw_erased_mem_count ==
 			bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
@@ -1006,7 +1006,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			err = mmc_select_hs200(card);
 		else if	(host->caps & MMC_CAP_MMC_HIGHSPEED)
 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					 EXT_CSD_HS_TIMING, 1, 0);
+					 EXT_CSD_HS_TIMING, 1,
+					 card->ext_csd.generic_cmd6_time);
 
 		if (err && err != -EBADMSG)
 			goto free_card;
@@ -1116,7 +1117,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 * Activate wide bus and DDR (if supported).
 	 */
 	if (!mmc_card_hs200(card) &&
-	    (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
+	    (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
 	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
 		static unsigned ext_csd_bits[][2] = {
 			{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
@@ -1315,11 +1316,13 @@ static int mmc_suspend(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	if (mmc_card_can_sleep(host))
+	if (mmc_card_can_sleep(host)) {
 		err = mmc_card_sleep(host);
-	else if (!mmc_host_is_spi(host))
+		if (!err)
+			mmc_card_set_sleep(host->card);
+	} else if (!mmc_host_is_spi(host))
 		mmc_deselect_cards(host);
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_release_host(host);
 
 	return err;
@@ -1339,7 +1342,11 @@ static int mmc_resume(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	err = mmc_init_card(host, host->ocr, host->card);
+	if (mmc_card_is_sleep(host->card)) {
+		err = mmc_card_awake(host);
+		mmc_card_clr_sleep(host->card);
+	} else
+		err = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);
 
 	return err;
@@ -1349,7 +1356,8 @@ static int mmc_power_restore(struct mmc_host *host)
 {
 	int ret;
 
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+	mmc_card_clr_sleep(host->card);
 	mmc_claim_host(host);
 	ret = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);

drivers/mmc/core/sd.c

@@ -451,9 +451,11 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
 	 * information and let the hardware specific code
 	 * return what is possible given the options
 	 */
+	mmc_host_clk_hold(card->host);
 	drive_strength = card->host->ops->select_drive_strength(
 		card->sw_caps.uhs_max_dtr,
 		host_drv_type, card_drv_type);
+	mmc_host_clk_release(card->host);
 
 	err = mmc_sd_switch(card, 1, 2, drive_strength, status);
 	if (err)
@@ -660,9 +662,12 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 		goto out;
 
 	/* SPI mode doesn't define CMD19 */
-	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+		mmc_host_clk_hold(card->host);
 		err = card->host->ops->execute_tuning(card->host,
 						      MMC_SEND_TUNING_BLOCK);
+		mmc_host_clk_release(card->host);
+	}
 
 out:
 	kfree(status);
@@ -850,8 +855,11 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	if (!reinit) {
 		int ro = -1;
 
-		if (host->ops->get_ro)
+		if (host->ops->get_ro) {
+			mmc_host_clk_hold(card->host);
 			ro = host->ops->get_ro(host);
+			mmc_host_clk_release(card->host);
+		}
 
 		if (ro < 0) {
 			pr_warning("%s: host does not "
@@ -967,8 +975,11 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		 * Since initialization is now complete, enable preset
 		 * value registers for UHS-I cards.
 		 */
-		if (host->ops->enable_preset_value)
+		if (host->ops->enable_preset_value) {
+			mmc_host_clk_hold(card->host);
 			host->ops->enable_preset_value(host, true);
+			mmc_host_clk_release(card->host);
+		}
 	} else {
 		/*
 		 * Attempt to change to high-speed (if supported)
@@ -1151,8 +1162,11 @@ int mmc_attach_sd(struct mmc_host *host)
 		return err;
 
 	/* Disable preset value enable if already set since last time */
-	if (host->ops->enable_preset_value)
+	if (host->ops->enable_preset_value) {
+		mmc_host_clk_hold(host);
 		host->ops->enable_preset_value(host, false);
+		mmc_host_clk_release(host);
+	}
 
 	err = mmc_send_app_op_cond(host, 0, &ocr);
 	if (err)

drivers/mmc/core/sdio.c

@@ -98,10 +98,11 @@ static int sdio_init_func(struct mmc_card *card, unsigned int fn)
 	return ret;
 }
 
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
 {
 	int ret;
 	int cccr_vsn;
+	int uhs = ocr & R4_18V_PRESENT;
 	unsigned char data;
 	unsigned char speed;
 
@@ -149,7 +150,7 @@ static int sdio_read_cccr(struct mmc_card *card)
 		card->scr.sda_spec3 = 0;
 		card->sw_caps.sd3_bus_mode = 0;
 		card->sw_caps.sd3_drv_type = 0;
-		if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+		if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
 			card->scr.sda_spec3 = 1;
 			ret = mmc_io_rw_direct(card, 0, 0,
 				SDIO_CCCR_UHS, 0, &data);
@@ -712,7 +713,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	/*
 	 * Read the common registers.
 	 */
-	err = sdio_read_cccr(card);
+	err = sdio_read_cccr(card, ocr);
 	if (err)
 		goto remove;
 

drivers/mmc/core/sdio_irq.c

@@ -146,15 +146,21 @@ static int sdio_irq_thread(void *_host)
 		}
 
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (host->caps & MMC_CAP_SDIO_IRQ)
+		if (host->caps & MMC_CAP_SDIO_IRQ) {
+			mmc_host_clk_hold(host);
 			host->ops->enable_sdio_irq(host, 1);
+			mmc_host_clk_release(host);
+		}
 		if (!kthread_should_stop())
 			schedule_timeout(period);
 		set_current_state(TASK_RUNNING);
 	} while (!kthread_should_stop());
 
-	if (host->caps & MMC_CAP_SDIO_IRQ)
+	if (host->caps & MMC_CAP_SDIO_IRQ) {
+		mmc_host_clk_hold(host);
 		host->ops->enable_sdio_irq(host, 0);
+		mmc_host_clk_release(host);
+	}
 
 	pr_debug("%s: IRQ thread exiting with code %d\n",
 		 mmc_hostname(host), ret);

drivers/mmc/host/atmel-mci.c

@@ -969,11 +969,14 @@ static void atmci_start_request(struct atmel_mci *host,
 	host->data_status = 0;
 
 	if (host->need_reset) {
+		iflags = atmci_readl(host, ATMCI_IMR);
+		iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
 		atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
 		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
 		atmci_writel(host, ATMCI_MR, host->mode_reg);
 		if (host->caps.has_cfg_reg)
 			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		atmci_writel(host, ATMCI_IER, iflags);
 		host->need_reset = false;
 	}
 	atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);

drivers/mmc/host/dw_mmc.c

@@ -22,7 +22,6 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/scatterlist.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
@@ -502,8 +501,14 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 		host->dir_status = DW_MCI_SEND_STATUS;
 
 	if (dw_mci_submit_data_dma(host, data)) {
+		int flags = SG_MITER_ATOMIC;
+		if (host->data->flags & MMC_DATA_READ)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+
+		sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
 		host->sg = data->sg;
-		host->pio_offset = 0;
 		host->part_buf_start = 0;
 		host->part_buf_count = 0;
 
@@ -972,6 +977,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 				 * generates a block interrupt, hence setting
 				 * the scatter-gather pointer to NULL.
 				 */
+				sg_miter_stop(&host->sg_miter);
 				host->sg = NULL;
 				ctrl = mci_readl(host, CTRL);
 				ctrl |= SDMMC_CTRL_FIFO_RESET;
@@ -1311,54 +1317,44 @@ static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
 
 static void dw_mci_read_data_pio(struct dw_mci *host)
 {
-	struct scatterlist *sg = host->sg;
-	void *buf = sg_virt(sg);
-	unsigned int offset = host->pio_offset;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
 	struct mmc_data	*data = host->data;
 	int shift = host->data_shift;
 	u32 status;
 	unsigned int nbytes = 0, len;
+	unsigned int remain, fcnt;
 
 	do {
-		len = host->part_buf_count +
-			(SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
-		if (offset + len <= sg->length) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+
+		host->sg = sg_miter->__sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+					<< shift) + host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
 			dw_mci_pull_data(host, (void *)(buf + offset), len);
-
 			offset += len;
 			nbytes += len;
-
-			if (offset == sg->length) {
-				flush_dcache_page(sg_page(sg));
-				host->sg = sg = sg_next(sg);
-				if (!sg)
-					goto done;
-
-				offset = 0;
-				buf = sg_virt(sg);
-			}
-		} else {
-			unsigned int remaining = sg->length - offset;
-			dw_mci_pull_data(host, (void *)(buf + offset),
-					 remaining);
-			nbytes += remaining;
-
-			flush_dcache_page(sg_page(sg));
-			host->sg = sg = sg_next(sg);
-			if (!sg)
-				goto done;
-
-			offset = len - remaining;
-			buf = sg_virt(sg);
-			dw_mci_pull_data(host, buf, offset);
-			nbytes += offset;
-		}
+			remain -= len;
+		} while (remain);
+		sg_miter->consumed = offset;
 
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
 		if (status & DW_MCI_DATA_ERROR_FLAGS) {
 			host->data_status = status;
 			data->bytes_xfered += nbytes;
+			sg_miter_stop(sg_miter);
+			host->sg = NULL;
 			smp_wmb();
 
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
@@ -1367,65 +1363,66 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
 			return;
 		}
 	} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
-	host->pio_offset = offset;
 	data->bytes_xfered += nbytes;
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
 	return;
 
 done:
 	data->bytes_xfered += nbytes;
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
 	smp_wmb();
 	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 }
 
 static void dw_mci_write_data_pio(struct dw_mci *host)
 {
-	struct scatterlist *sg = host->sg;
-	void *buf = sg_virt(sg);
-	unsigned int offset = host->pio_offset;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
 	struct mmc_data	*data = host->data;
 	int shift = host->data_shift;
 	u32 status;
 	unsigned int nbytes = 0, len;
+	unsigned int fifo_depth = host->fifo_depth;
+	unsigned int remain, fcnt;
 
 	do {
-		len = ((host->fifo_depth -
-			SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
-			- host->part_buf_count;
-		if (offset + len <= sg->length) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+
+		host->sg = sg_miter->__sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = ((fifo_depth -
+				 SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+					<< shift) - host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
 			host->push_data(host, (void *)(buf + offset), len);
-
 			offset += len;
 			nbytes += len;
-			if (offset == sg->length) {
-				host->sg = sg = sg_next(sg);
-				if (!sg)
-					goto done;
-
-				offset = 0;
-				buf = sg_virt(sg);
-			}
-		} else {
-			unsigned int remaining = sg->length - offset;
-
-			host->push_data(host, (void *)(buf + offset),
-					remaining);
-			nbytes += remaining;
-
-			host->sg = sg = sg_next(sg);
-			if (!sg)
-				goto done;
-
-			offset = len - remaining;
-			buf = sg_virt(sg);
-			host->push_data(host, (void *)buf, offset);
-			nbytes += offset;
-		}
+			remain -= len;
+		} while (remain);
+		sg_miter->consumed = offset;
 
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
 		if (status & DW_MCI_DATA_ERROR_FLAGS) {
 			host->data_status = status;
 			data->bytes_xfered += nbytes;
+			sg_miter_stop(sg_miter);
+			host->sg = NULL;
 
 			smp_wmb();
 
@@ -1435,12 +1432,20 @@ static void dw_mci_write_data_pio(struct dw_mci *host)
 			return;
 		}
 	} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
-	host->pio_offset = offset;
 	data->bytes_xfered += nbytes;
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
 	return;
 
 done:
 	data->bytes_xfered += nbytes;
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
 	smp_wmb();
 	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
 }
@@ -1643,6 +1648,7 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 				 * block interrupt, hence setting the
 				 * scatter-gather pointer to NULL.
 				 */
+				sg_miter_stop(&host->sg_miter);
 				host->sg = NULL;
 
 				ctrl = mci_readl(host, CTRL);

drivers/mmc/host/of_mmc_spi.c

@@ -113,8 +113,8 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi)
 		const int j = i * 2;
 		u32 mask;
 
-		mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
-					       voltage_ranges[j + 1]);
+		mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+					       be32_to_cpu(voltage_ranges[j + 1]));
 		if (!mask) {
 			ret = -EINVAL;
 			dev_err(dev, "OF: voltage-range #%d is invalid\n", i);

drivers/mmc/host/sdhci-of-esdhc.c

@@ -38,6 +38,23 @@ static u8 esdhc_readb(struct sdhci_host *host, int reg)
 	int base = reg & ~0x3;
 	int shift = (reg & 0x3) * 8;
 	u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+	/*
+	 * "DMA select" locates at offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it locates at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		dma_bits = in_be32(host->ioaddr + reg);
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+		/* fixup the result */
+		ret &= ~SDHCI_CTRL_DMA_MASK;
+		ret |= dma_bits;
+	}
+
 	return ret;
 }
 
@@ -56,6 +73,21 @@ static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
 
 static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
 {
+	/*
+	 * "DMA select" location is offset 0x28 in SD specification, but on
+	 * P5020 or P3041, it's located at 0x29.
+	 */
+	if (reg == SDHCI_HOST_CONTROL) {
+		u32 dma_bits;
+
+		/* DMA select is 22,23 bits in Protocol Control Register */
+		dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+		clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+			dma_bits);
+		val &= ~SDHCI_CTRL_DMA_MASK;
+		val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+	}
+
 	/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
 	if (reg == SDHCI_HOST_CONTROL)
 		val &= ~ESDHC_HOST_CONTROL_RES;

drivers/mmc/host/sdhci-pci.c

@@ -250,7 +250,7 @@ static int mfd_emmc_probe_slot(struct sdhci_pci_slot *slot)
 
 static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
 {
-	slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD;
+	slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
 	return 0;
 }
 

drivers/mmc/host/sdhci-pltfm.c

@@ -2,7 +2,7 @@
  * sdhci-pltfm.c Support for SDHCI platform devices
  * Copyright (c) 2009 Intel Corporation
  *
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
  * Copyright (c) 2009 MontaVista Software, Inc.
  *
  * Authors: Xiaobo Xie <X.Xie@freescale.com>
@@ -71,6 +71,14 @@ void sdhci_get_of_property(struct platform_device *pdev)
 		if (sdhci_of_wp_inverted(np))
 			host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
 
+		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+		if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+		    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+		    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+			host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
 		clk = of_get_property(np, "clock-frequency", &size);
 		if (clk && size == sizeof(*clk) && *clk)
 			pltfm_host->clock = be32_to_cpup(clk);

drivers/mmc/host/sh_mmcif.c

@@ -1327,7 +1327,7 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto clean_up2;
 
-	mmc_add_host(mmc);
+	INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
 
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 
@@ -1338,22 +1338,24 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 	}
 	ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
 	if (ret) {
-		free_irq(irq[0], host);
 		dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
-		goto clean_up3;
+		goto clean_up4;
 	}
 
-	INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
-
-	mmc_detect_change(host->mmc, 0);
+	ret = mmc_add_host(mmc);
+	if (ret < 0)
+		goto clean_up5;
 
 	dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
 	dev_dbg(&pdev->dev, "chip ver H'%04x\n",
 		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
 	return ret;
 
+clean_up5:
+	free_irq(irq[1], host);
+clean_up4:
+	free_irq(irq[0], host);
 clean_up3:
-	mmc_remove_host(mmc);
 	pm_runtime_suspend(&pdev->dev);
 clean_up2:
 	pm_runtime_disable(&pdev->dev);

drivers/mmc/host/tmio_mmc.h

@@ -20,8 +20,8 @@
 #include <linux/mmc/tmio.h>
 #include <linux/mutex.h>
 #include <linux/pagemap.h>
-#include <linux/spinlock.h>
 #include <linux/scatterlist.h>
+#include <linux/spinlock.h>
 
 /* Definitions for values the CTRL_SDIO_STATUS register can take. */
 #define TMIO_SDIO_STAT_IOIRQ	0x0001
@@ -120,6 +120,7 @@ void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data);
 void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable);
 void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
 void tmio_mmc_release_dma(struct tmio_mmc_host *host);
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host);
 #else
 static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
 			       struct mmc_data *data)
@@ -140,6 +141,10 @@ static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host,
 static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
 {
 }
+
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+}
 #endif
 
 #ifdef CONFIG_PM

drivers/mmc/host/tmio_mmc_dma.c

@@ -34,6 +34,18 @@ void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable)
 #endif
 }
 
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+	tmio_mmc_enable_dma(host, false);
+
+	if (host->chan_rx)
+		dmaengine_terminate_all(host->chan_rx);
+	if (host->chan_tx)
+		dmaengine_terminate_all(host->chan_tx);
+
+	tmio_mmc_enable_dma(host, true);
+}
+
 static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
 {
 	struct scatterlist *sg = host->sg_ptr, *sg_tmp;

drivers/mmc/host/tmio_mmc_pio.c

@@ -41,8 +41,8 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
-#include <linux/workqueue.h>
 #include <linux/spinlock.h>
+#include <linux/workqueue.h>
 
 #include "tmio_mmc.h"
 
@@ -246,6 +246,7 @@ static void tmio_mmc_reset_work(struct work_struct *work)
 	/* Ready for new calls */
 	host->mrq = NULL;
 
+	tmio_mmc_abort_dma(host);
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -272,6 +273,9 @@ static void tmio_mmc_finish_request(struct tmio_mmc_host *host)
 	host->mrq = NULL;
 	spin_unlock_irqrestore(&host->lock, flags);
 
+	if (mrq->cmd->error || (mrq->data && mrq->data->error))
+		tmio_mmc_abort_dma(host);
+
 	mmc_request_done(host->mmc, mrq);
 }
 

include/linux/mmc/card.h

@@ -217,6 +217,7 @@ struct mmc_card {
 #define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
 #define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
 #define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
+#define MMC_STATE_SLEEP		(1<<9)		/* card is in sleep state */
 	unsigned int		quirks; 	/* card quirks */
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
@@ -382,6 +383,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 #define mmc_sd_card_uhs(c)	((c)->state & MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
 #define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c)	((c)->state & MMC_STATE_SLEEP)
 
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
@@ -393,7 +395,9 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
 #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
 #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c)	((c)->state |= MMC_STATE_SLEEP)
 
+#define mmc_card_clr_sleep(c)	((c)->state &= ~MMC_STATE_SLEEP)
 /*
  * Quirk add/remove for MMC products.
  */

include/linux/mmc/dw_mmc.h

@@ -14,6 +14,8 @@
 #ifndef LINUX_MMC_DW_MMC_H
 #define LINUX_MMC_DW_MMC_H
 
+#include <linux/scatterlist.h>
+
 #define MAX_MCI_SLOTS	2
 
 enum dw_mci_state {
@@ -40,7 +42,7 @@ struct mmc_data;
  * @lock: Spinlock protecting the queue and associated data.
  * @regs: Pointer to MMIO registers.
  * @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
  * @cur_slot: The slot which is currently using the controller.
  * @mrq: The request currently being processed on @cur_slot,
  *	or NULL if the controller is idle.
@@ -115,7 +117,7 @@ struct dw_mci {
 	void __iomem		*regs;
 
 	struct scatterlist	*sg;
-	unsigned int		pio_offset;
+	struct sg_mapping_iter	sg_miter;
 
 	struct dw_mci_slot	*cur_slot;
 	struct mmc_request	*mrq;

include/linux/mmc/host.h

@@ -257,6 +257,7 @@ struct mmc_host {
 #define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;
@@ -444,4 +445,23 @@ static inline int mmc_boot_partition_access(struct mmc_host *host)
 	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
 }
 
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	return host->ios.clock;
+}
+#endif
 #endif /* LINUX_MMC_HOST_H */