Commit 8b614aeb authored by Daniel Borkmann's avatar Daniel Borkmann Committed by David S. Miller

bpf: move clearing of A/X into classic to eBPF migration prologue

Back in the days where eBPF (or back then "internal BPF" ;->) was not
exposed to user space, and only the classic BPF programs internally
translated into eBPF programs, we missed the fact that for classic BPF
A and X needed to be cleared. It was fixed back then via 83d5b7ef
("net: filter: initialize A and X registers"), and thus classic BPF
specifics were added to the eBPF interpreter core to work around it.

This added some confusion for JIT developers later on that take the
eBPF interpreter code as an example for deriving their JIT. F.e. in
f75298f5 ("s390/bpf: clear correct BPF accumulator register"), at
least X could leak stack memory. Furthermore, since this is only needed
for classic BPF translations and not for eBPF (verifier takes care
that read access to regs cannot be done uninitialized), more complexity
is added to JITs as they need to determine whether they deal with
migrations or native eBPF where they can just omit clearing A/X in
their prologue and thus reduce image size a bit, see f.e. cde66c2d
("s390/bpf: Only clear A and X for converted BPF programs"). In other
cases (x86, arm64), A and X is being cleared in the prologue also for
eBPF case, which is unnecessary.

Lets move this into the BPF migration in bpf_convert_filter() where it
actually belongs as long as the number of eBPF JITs are still few. It
can thus be done generically; allowing us to remove the quirk from
__bpf_prog_run() and to slightly reduce JIT image size in case of eBPF,
while reducing code duplication on this matter in current(/future) eBPF
JITs.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
Reviewed-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
Tested-by: default avatarMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Zi Shen Lim <zlim.lnx@gmail.com>
Cc: Yang Shi <yang.shi@linaro.org>
Acked-by: default avatarYang Shi <yang.shi@linaro.org>
Acked-by: default avatarZi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 05c74e5e
......@@ -152,8 +152,6 @@ static void build_prologue(struct jit_ctx *ctx)
const u8 r8 = bpf2a64[BPF_REG_8];
const u8 r9 = bpf2a64[BPF_REG_9];
const u8 fp = bpf2a64[BPF_REG_FP];
const u8 ra = bpf2a64[BPF_REG_A];
const u8 rx = bpf2a64[BPF_REG_X];
const u8 tmp1 = bpf2a64[TMP_REG_1];
const u8 tmp2 = bpf2a64[TMP_REG_2];
......@@ -200,10 +198,6 @@ static void build_prologue(struct jit_ctx *ctx)
/* Set up function call stack */
emit(A64_SUB_I(1, A64_SP, A64_SP, STACK_SIZE), ctx);
/* Clear registers A and X */
emit_a64_mov_i64(ra, 0, ctx);
emit_a64_mov_i64(rx, 0, ctx);
}
static void build_epilogue(struct jit_ctx *ctx)
......
......@@ -408,7 +408,7 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit)
* Save registers and create stack frame if necessary.
* See stack frame layout desription in "bpf_jit.h"!
*/
static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic)
static void bpf_jit_prologue(struct bpf_jit *jit)
{
if (jit->seen & SEEN_TAIL_CALL) {
/* xc STK_OFF_TCCNT(4,%r15),STK_OFF_TCCNT(%r15) */
......@@ -448,15 +448,6 @@ static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic)
/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15,
STK_OFF_SKBP);
/* Clear A (%b0) and X (%b7) registers for converted BPF programs */
if (is_classic) {
if (REG_SEEN(BPF_REG_A))
/* lghi %ba,0 */
EMIT4_IMM(0xa7090000, BPF_REG_A, 0);
if (REG_SEEN(BPF_REG_X))
/* lghi %bx,0 */
EMIT4_IMM(0xa7090000, BPF_REG_X, 0);
}
}
/*
......@@ -1245,7 +1236,7 @@ static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp)
jit->lit = jit->lit_start;
jit->prg = 0;
bpf_jit_prologue(jit, bpf_prog_was_classic(fp));
bpf_jit_prologue(jit);
for (i = 0; i < fp->len; i += insn_count) {
insn_count = bpf_jit_insn(jit, fp, i);
if (insn_count < 0)
......
......@@ -193,7 +193,7 @@ struct jit_context {
32 /* space for rbx, r13, r14, r15 */ + \
8 /* space for skb_copy_bits() buffer */)
#define PROLOGUE_SIZE 51
#define PROLOGUE_SIZE 48
/* emit x64 prologue code for BPF program and check it's size.
* bpf_tail_call helper will skip it while jumping into another program
......@@ -229,11 +229,15 @@ static void emit_prologue(u8 **pprog)
/* mov qword ptr [rbp-X],r15 */
EMIT3_off32(0x4C, 0x89, 0xBD, -STACKSIZE + 24);
/* clear A and X registers */
EMIT2(0x31, 0xc0); /* xor eax, eax */
EMIT3(0x4D, 0x31, 0xED); /* xor r13, r13 */
/* Clear the tail call counter (tail_call_cnt): for eBPF tail calls
* we need to reset the counter to 0. It's done in two instructions,
* resetting rax register to 0 (xor on eax gets 0 extended), and
* moving it to the counter location.
*/
/* clear tail_cnt: mov qword ptr [rbp-X], rax */
/* xor eax, eax */
EMIT2(0x31, 0xc0);
/* mov qword ptr [rbp-X], rax */
EMIT3_off32(0x48, 0x89, 0x85, -STACKSIZE + 32);
BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
......
......@@ -306,10 +306,6 @@ static unsigned int __bpf_prog_run(void *ctx, const struct bpf_insn *insn)
FP = (u64) (unsigned long) &stack[ARRAY_SIZE(stack)];
ARG1 = (u64) (unsigned long) ctx;
/* Registers used in classic BPF programs need to be reset first. */
regs[BPF_REG_A] = 0;
regs[BPF_REG_X] = 0;
select_insn:
goto *jumptable[insn->code];
......
......@@ -381,9 +381,22 @@ static int bpf_convert_filter(struct sock_filter *prog, int len,
new_insn = new_prog;
fp = prog;
if (new_insn)
*new_insn = BPF_MOV64_REG(BPF_REG_CTX, BPF_REG_ARG1);
new_insn++;
/* Classic BPF related prologue emission. */
if (new_insn) {
/* Classic BPF expects A and X to be reset first. These need
* to be guaranteed to be the first two instructions.
*/
*new_insn++ = BPF_ALU64_REG(BPF_XOR, BPF_REG_A, BPF_REG_A);
*new_insn++ = BPF_ALU64_REG(BPF_XOR, BPF_REG_X, BPF_REG_X);
/* All programs must keep CTX in callee saved BPF_REG_CTX.
* In eBPF case it's done by the compiler, here we need to
* do this ourself. Initial CTX is present in BPF_REG_ARG1.
*/
*new_insn++ = BPF_MOV64_REG(BPF_REG_CTX, BPF_REG_ARG1);
} else {
new_insn += 3;
}
for (i = 0; i < len; fp++, i++) {
struct bpf_insn tmp_insns[6] = { };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment