Skip to content

L
linux
Commit 8be3d3b2 authored by Marek Vasut's avatar Marek Vasut Committed by Mark Brown
Browse files
Options

mmc: spi: Move SSP register definitions into separate file 

Move the definitions into separate file so separate SPI driver can be
implemented. The SSP controller in MXS can act both as a MMC host and
as a SPI host.

Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Acked-by: default avatarChris Ball <cjb@laptop.org>
Acked-by: default avatarShawn Guo <shawn.guo@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent d9875690
Hide whitespace changes
Inline Side-by-side
Showing with 112 additions and 84 deletions
drivers/mmc/host/mxs-mmc.c
View file @ 8be3d3b2
......@@ -45,87 +45,10 @@
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/mmc/mxs-mmc.h>
#include <linux/spi/mxs-spi.h>
#define DRIVER_NAME "mxs-mmc"
/* card detect polling timeout */
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
/* SSP registers */
#define HW_SSP_CTRL0 0x000
#define BM_SSP_CTRL0_RUN (1 << 29)
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
#define BM_SSP_CTRL0_READ (1 << 25)
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
#define BP_SSP_CTRL0_BUS_WIDTH (22)
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
#define BM_SSP_CTRL0_ENABLE (1 << 16)
#define BP_SSP_CTRL0_XFER_COUNT (0)
#define BM_SSP_CTRL0_XFER_COUNT (0xffff)
#define HW_SSP_CMD0 0x010
#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
#define BP_SSP_CMD0_BLOCK_SIZE (16)
#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
#define BP_SSP_CMD0_BLOCK_COUNT (8)
#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
#define BP_SSP_CMD0_CMD (0)
#define BM_SSP_CMD0_CMD (0xff)
#define HW_SSP_CMD1 0x020
#define HW_SSP_XFER_SIZE 0x030
#define HW_SSP_BLOCK_SIZE 0x040
#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT (4)
#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
#define BP_SSP_TIMING_TIMEOUT (16)
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
#define BP_SSP_TIMING_CLOCK_DIVIDE (8)
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
#define BP_SSP_TIMING_CLOCK_RATE (0)
#define BM_SSP_TIMING_CLOCK_RATE (0xff)
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
#define BM_SSP_CTRL1_POLARITY (1 << 9)
#define BP_SSP_CTRL1_WORD_LENGTH (4)
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
#define BP_SSP_CTRL1_SSP_MODE (0)
#define BM_SSP_CTRL1_SSP_MODE (0xf)
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
#define MXS_MMC_IRQ_BITS (BM_SSP_CTRL1_SDIO_IRQ | \
BM_SSP_CTRL1_RESP_ERR_IRQ | \
BM_SSP_CTRL1_RESP_TIMEOUT_IRQ | \
......@@ -135,12 +58,8 @@
BM_SSP_CTRL1_RECV_TIMEOUT_IRQ | \
BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
#define SSP_PIO_NUM 3
enum mxs_mmc_id {
IMX23_MMC,
IMX28_MMC,
};
/* card detect polling timeout */
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
struct mxs_mmc_host {
struct mmc_host *mmc;
......
include/linux/spi/mxs-spi.h 0 → 100644
View file @ 8be3d3b2
/*
* include/linux/spi/mxs-spi.h
*
* Freescale i.MX233/i.MX28 SPI controller register definition
*
* Copyright 2008 Embedded Alley Solutions, Inc.
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
/* SSP registers */
#define HW_SSP_CTRL0 0x000
#define BM_SSP_CTRL0_RUN (1 << 29)
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
#define BM_SSP_CTRL0_READ (1 << 25)
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
#define BP_SSP_CTRL0_BUS_WIDTH 22
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
#define BM_SSP_CTRL0_ENABLE (1 << 16)
#define BP_SSP_CTRL0_XFER_COUNT 0
#define BM_SSP_CTRL0_XFER_COUNT 0xffff
#define HW_SSP_CMD0 0x010
#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
#define BP_SSP_CMD0_BLOCK_SIZE 16
#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
#define BP_SSP_CMD0_BLOCK_COUNT 8
#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
#define BP_SSP_CMD0_CMD 0
#define BM_SSP_CMD0_CMD 0xff
#define HW_SSP_CMD1 0x020
#define HW_SSP_XFER_SIZE 0x030
#define HW_SSP_BLOCK_SIZE 0x040
#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
#define BP_SSP_TIMING_TIMEOUT 16
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
#define BP_SSP_TIMING_CLOCK_DIVIDE 8
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
#define BP_SSP_TIMING_CLOCK_RATE 0
#define BM_SSP_TIMING_CLOCK_RATE 0xff
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
#define BM_SSP_CTRL1_POLARITY (1 << 9)
#define BP_SSP_CTRL1_WORD_LENGTH 4
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
#define BP_SSP_CTRL1_SSP_MODE 0
#define BM_SSP_CTRL1_SSP_MODE 0xf
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
#define SSP_PIO_NUM 3
enum mxs_mmc_id {
IMX23_MMC,
IMX28_MMC,
};
#endif /* __LINUX_SPI_MXS_SPI_H__ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7