V4L/DVB (3577): Cleanup audio input handling

Cleanup audio input handling in bttv and tvaudio:
- inputs were specified that were never used
- mute was handled as a special input which led to confusing code
- confusing naming made it difficult to see if the setting was for
  i2c or gpio.
The old audiochip.h input names moved to tvaudio.h. Currently this
is used both by tvaudio and msp3400 until the msp3400 implements the
new msp3400-specific inputs.
Detect in bttv the tvaudio and msp3400 i2c clients and use these
client pointers to set the inputs directly instead of broadcasting the
command.
Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be
replaced again later by the new ROUTING commands.
Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is
a user level command and not to be used internally. It wasn't called at
all anyway.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/bt8xx/bt832.c

@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "bttv.h"

drivers/media/video/bt8xx/bttv-driver.c

@@ -36,6 +36,7 @@
 #include <linux/kdev_t.h>
 #include "bttvp.h"
 #include <media/v4l2-common.h>
+#include <media/tvaudio.h>
 
 #include <linux/dma-mapping.h>
 
@@ -926,45 +927,65 @@ video_mux(struct bttv *btv, unsigned int input)
 
 static char *audio_modes[] = {
 	"audio: tuner", "audio: radio", "audio: extern",
-	"audio: intern", "audio: off"
+	"audio: intern", "audio: mute"
 };
 
 static int
-audio_mux(struct bttv *btv, int mode)
+audio_mux(struct bttv *btv, int input, int mute)
 {
-	int val,mux,i2c_mux,signal;
+	int gpio_val, signal;
+	struct v4l2_audio aud_input;
+	struct v4l2_control ctrl;
+	struct i2c_client *c;
 
+	memset(&aud_input, 0, sizeof(aud_input));
 	gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
 		   bttv_tvcards[btv->c.type].gpiomask);
 	signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC;
 
-	switch (mode) {
-	case AUDIO_MUTE:
-		btv->audio |= AUDIO_MUTE;
-		break;
-	case AUDIO_UNMUTE:
-		btv->audio &= ~AUDIO_MUTE;
-		break;
-	case AUDIO_TUNER:
-	case AUDIO_RADIO:
-	case AUDIO_EXTERN:
-	case AUDIO_INTERN:
-		btv->audio &= AUDIO_MUTE;
-		btv->audio |= mode;
-	}
-	i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
-	if (btv->opt_automute && !signal && !btv->radio_user)
-		mux = AUDIO_OFF;
-
-	val = bttv_tvcards[btv->c.type].audiomux[mux];
-	gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val);
+	btv->mute = mute;
+	btv->audio = input;
+
+	/* automute */
+	mute = mute || (btv->opt_automute && !signal && !btv->radio_user);
+
+	if (mute)
+		gpio_val = bttv_tvcards[btv->c.type].gpiomute;
+	else
+		gpio_val = bttv_tvcards[btv->c.type].gpiomux[input];
+	aud_input.index = btv->audio;
+
+	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val);
 	if (bttv_gpio)
-		bttv_gpio_tracking(btv,audio_modes[mux]);
-	if (!in_interrupt())
-		bttv_call_i2c_clients(btv,AUDC_SET_INPUT,&(i2c_mux));
+		bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]);
+	if (in_interrupt())
+		return 0;
+
+	ctrl.id = V4L2_CID_AUDIO_MUTE;
+	/* take automute into account, just btv->mute is not enough */
+	ctrl.value = mute;
+	bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
+	c = btv->i2c_msp34xx_client;
+	if (c)
+		c->driver->command(c, VIDIOC_S_AUDIO, &aud_input);
+	c = btv->i2c_tvaudio_client;
+	if (c)
+		c->driver->command(c, VIDIOC_S_AUDIO, &aud_input);
 	return 0;
 }
 
+static inline int
+audio_mute(struct bttv *btv, int mute)
+{
+	return audio_mux(btv, btv->audio, mute);
+}
+
+static inline int
+audio_input(struct bttv *btv, int input)
+{
+	return audio_mux(btv, input, btv->mute);
+}
+
 static void
 i2c_vidiocschan(struct bttv *btv)
 {
@@ -1023,8 +1044,8 @@ set_input(struct bttv *btv, unsigned int input)
 	} else {
 		video_mux(btv,input);
 	}
-	audio_mux(btv,(input == bttv_tvcards[btv->c.type].tuner ?
-		       AUDIO_TUNER : AUDIO_EXTERN));
+	audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ?
+		       TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN));
 	set_tvnorm(btv,btv->tvnorm);
 	i2c_vidiocschan(btv);
 }
@@ -1236,10 +1257,10 @@ static int set_control(struct bttv *btv, struct v4l2_control *c)
 	case V4L2_CID_AUDIO_MUTE:
 		if (c->value) {
 			va.flags |= VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_MUTE);
+			audio_mute(btv, 1);
 		} else {
 			va.flags &= ~VIDEO_AUDIO_MUTE;
-			audio_mux(btv, AUDIO_UNMUTE);
+			audio_mute(btv, 0);
 		}
 		break;
 
@@ -1654,7 +1675,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
 			return -EINVAL;
 
 		mutex_lock(&btv->lock);
-		audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE);
+		audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0);
 		bttv_call_i2c_clients(btv,cmd,v);
 
 		/* card specific hooks */
@@ -3163,8 +3184,8 @@ static int radio_open(struct inode *inode, struct file *file)
 
 	file->private_data = btv;
 
-	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type);
-	audio_mux(btv,AUDIO_RADIO);
+	bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
+	audio_input(btv,TVAUDIO_INPUT_RADIO);
 
 	mutex_unlock(&btv->lock);
 	return 0;
@@ -3750,7 +3771,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs)
 			bttv_irq_switch_video(btv);
 
 		if ((astat & BT848_INT_HLOCK)  &&  btv->opt_automute)
-			audio_mux(btv, -1);
+			audio_mute(btv, btv->mute);  /* trigger automute */
 
 		if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) {
 			printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr,
@@ -4051,7 +4072,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 		bt848_contrast(btv,32768);
 		bt848_hue(btv,32768);
 		bt848_sat(btv,32768);
-		audio_mux(btv,AUDIO_MUTE);
+		audio_mute(btv, 1);
 		set_input(btv,0);
 	}
 

drivers/media/video/bt8xx/bttv-i2c.c

@@ -302,6 +302,10 @@ static int attach_inform(struct i2c_client *client)
 	if (!client->driver->command)
 		return 0;
 
+	if (client->driver->id == I2C_DRIVERID_MSP3400)
+		btv->i2c_msp34xx_client = client;
+	if (client->driver->id == I2C_DRIVERID_TVAUDIO)
+		btv->i2c_tvaudio_client = client;
 	if (btv->tuner_type != UNSET) {
 		struct tuner_setup tun_setup;
 

drivers/media/video/bt8xx/bttv.h

@@ -234,7 +234,8 @@ struct tvcard
 	unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO
 	u32 gpiomask;
 	u32 muxsel[16];
-	u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
+	u32 gpiomux[4];  /* Tuner, Radio, external, internal */
+	u32 gpiomute;    /* GPIO mute setting */
 	u32 gpiomask2;   /* GPIO MUX mask */
 
 	/* i2c audio flags */

drivers/media/video/bt8xx/bttvp.h

@@ -41,7 +41,6 @@
 
 #include <linux/device.h>
 #include <media/video-buf.h>
-#include <media/audiochip.h>
 #include <media/tuner.h>
 #include <media/tveeprom.h>
 #include <media/ir-common.h>
@@ -299,6 +298,8 @@ struct bttv {
 	int                        i2c_state, i2c_rc;
 	int                        i2c_done;
 	wait_queue_head_t          i2c_queue;
+	struct i2c_client 	  *i2c_msp34xx_client;
+	struct i2c_client 	  *i2c_tvaudio_client;
 
 	/* video4linux (1) */
 	struct video_device *video_dev;
@@ -321,6 +322,7 @@ struct bttv {
 	/* video state */
 	unsigned int input;
 	unsigned int audio;
+	unsigned int mute;
 	unsigned long freq;
 	int tvnorm,hue,contrast,bright,saturation;
 	struct v4l2_framebuffer fbuf;

drivers/media/video/cs53l32a.c

@@ -75,11 +75,6 @@ static int cs53l32a_command(struct i2c_client *client, unsigned int cmd,
 		cs53l32a_write(client, 0x01, 0x01 + (input->index << 4));
 		break;
 
-	case VIDIOC_G_AUDIO:
-		memset(input, 0, sizeof(*input));
-		input->index = (cs53l32a_read(client, 0x01) >> 4) & 3;
-		break;
-
 	case VIDIOC_G_CTRL:
 		if (ctrl->id == V4L2_CID_AUDIO_MUTE) {
 			ctrl->value = (cs53l32a_read(client, 0x03) & 0xc0) != 0;

drivers/media/video/cx25840/cx25840-audio.c

@@ -18,7 +18,6 @@
 
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "cx25840.h"

drivers/media/video/cx25840/cx25840-core.c

@@ -31,7 +31,6 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 
 #include "cx25840.h"
@@ -764,16 +763,6 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd,
 		return set_input(client, state->vid_input, input->index);
 	}
 
-	case VIDIOC_G_AUDIO:
-	{
-		struct v4l2_audio *input = arg;
-
-		memset(input, 0, sizeof(*input));
-		input->index = state->aud_input;
-		input->capability = V4L2_AUDCAP_STEREO;
-		break;
-	}
-
 	case VIDIOC_S_FREQUENCY:
 		input_change(client);
 		break;

drivers/media/video/cx88/cx88.h

@@ -27,7 +27,6 @@
 
 #include <media/tuner.h>
 #include <media/tveeprom.h>
-#include <media/audiochip.h>
 #include <media/video-buf.h>
 #include <media/video-buf-dvb.h>
 

drivers/media/video/msp3400-driver.c

@@ -53,7 +53,7 @@
 #include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
+#include <media/tvaudio.h>
 #include <linux/kthread.h>
 #include <linux/suspend.h>
 #include "msp3400.h"
@@ -585,51 +585,12 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl)
 static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 {
 	struct msp_state *state = i2c_get_clientdata(client);
-	u16 *sarg = arg;
 	int scart = 0;
 
 	if (msp_debug >= 2)
 		v4l_i2c_print_ioctl(client, cmd);
 
 	switch (cmd) {
-	case AUDC_SET_INPUT:
-		if (*sarg == state->input)
-			break;
-		state->input = *sarg;
-		switch (*sarg) {
-		case AUDIO_RADIO:
-			/* Hauppauge uses IN2 for the radio */
-			state->mode = MSP_MODE_FM_RADIO;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_EXTERN_1:
-			/* IN1 is often used for external input ... */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN1;
-			break;
-		case AUDIO_EXTERN_2:
-			/* ... sometimes it is IN2 through ;) */
-			state->mode = MSP_MODE_EXTERN;
-			scart       = SCART_IN2;
-			break;
-		case AUDIO_TUNER:
-			state->mode = -1;
-			break;
-		default:
-			if (*sarg & AUDIO_MUTE)
-				msp_set_scart(client, SCART_MUTE, 0);
-			break;
-		}
-		if (scart) {
-			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			msp_set_scart(client, scart, 0);
-			msp_write_dsp(client, 0x000d, 0x1900);
-			if (state->opmode != OPMODE_AUTOSELECT)
-				msp_set_audmode(client);
-		}
-		msp_wake_thread(client);
-		break;
-
 	case AUDC_SET_RADIO:
 		if (state->radio)
 			return 0;
@@ -750,82 +711,27 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		return 0;
 	}
 
-	case VIDIOC_ENUMINPUT:
-	{
-		struct v4l2_input *i = arg;
-
-		if (i->index != 0)
-			return -EINVAL;
-
-		i->type = V4L2_INPUT_TYPE_TUNER;
-		switch (i->index) {
-		case AUDIO_RADIO:
-			strcpy(i->name, "Radio");
-			break;
-		case AUDIO_EXTERN_1:
-			strcpy(i->name, "Extern 1");
-			break;
-		case AUDIO_EXTERN_2:
-			strcpy(i->name, "Extern 2");
-			break;
-		case AUDIO_TUNER:
-			strcpy(i->name, "Television");
-			break;
-		default:
-			return -EINVAL;
-		}
-		return 0;
-	}
-
-	case VIDIOC_G_AUDIO:
-	{
-		struct v4l2_audio *a = arg;
-
-		memset(a, 0, sizeof(*a));
-
-		switch (a->index) {
-		case AUDIO_RADIO:
-			strcpy(a->name, "Radio");
-			break;
-		case AUDIO_EXTERN_1:
-			strcpy(a->name, "Extern 1");
-			break;
-		case AUDIO_EXTERN_2:
-			strcpy(a->name, "Extern 2");
-			break;
-		case AUDIO_TUNER:
-			strcpy(a->name, "Television");
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		a->capability = V4L2_AUDCAP_STEREO;
-		a->mode = 0;  /* TODO: add support for AVL */
-		break;
-	}
-
 	case VIDIOC_S_AUDIO:
 	{
 		struct v4l2_audio *sarg = arg;
 
 		switch (sarg->index) {
-		case AUDIO_RADIO:
+		case TVAUDIO_INPUT_RADIO:
 			/* Hauppauge uses IN2 for the radio */
 			state->mode = MSP_MODE_FM_RADIO;
 			scart       = SCART_IN2;
 			break;
-		case AUDIO_EXTERN_1:
+		case TVAUDIO_INPUT_EXTERN:
 			/* IN1 is often used for external input ... */
 			state->mode = MSP_MODE_EXTERN;
 			scart       = SCART_IN1;
 			break;
-		case AUDIO_EXTERN_2:
+		case TVAUDIO_INPUT_INTERN:
 			/* ... sometimes it is IN2 through ;) */
 			state->mode = MSP_MODE_EXTERN;
 			scart       = SCART_IN2;
 			break;
-		case AUDIO_TUNER:
+		case TVAUDIO_INPUT_TUNER:
 			state->mode = -1;
 			break;
 		}

drivers/media/video/msp3400-kthreads.c

@@ -26,7 +26,6 @@
 #include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
 #include <linux/kthread.h>
 #include <linux/suspend.h>
 #include "msp3400.h"

drivers/media/video/saa7115.c

@@ -40,7 +40,6 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
 #include <asm/div64.h>
 
 MODULE_DESCRIPTION("Philips SAA7113/SAA7114/SAA7115 video decoder driver");

drivers/media/video/saa7134/saa7134.h

@@ -34,7 +34,6 @@
 #include <asm/io.h>
 
 #include <media/tuner.h>
-#include <media/audiochip.h>
 #include <media/ir-common.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/video-buf.h>

drivers/media/video/tda7432.c

@@ -48,7 +48,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-#include <media/audiochip.h>
 #include <media/v4l2-common.h>
 #include <media/i2c-addr.h>
 

drivers/media/video/tda9875.c

@@ -30,7 +30,6 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/init.h>
 
-#include <media/audiochip.h>
 
 #include <media/i2c-addr.h>
 
@@ -47,7 +46,6 @@ I2C_CLIENT_INSMOD;
 
 /* This is a superset of the TDA9875 */
 struct tda9875 {
-	int mode;
 	int rvol, lvol;
 	int bass, treble;
 	struct i2c_client c;
@@ -197,7 +195,6 @@ static void do_tda9875_init(struct i2c_client *client)
 
 	tda9875_write(client, TDA9875_MUT, 0xcc );   /* General mute  */
 
-	t->mode=AUDIO_UNMUTE;
 	t->lvol=t->rvol =0;  	/* 0dB */
 	t->bass=0; 			/* 0dB */
 	t->treble=0;  		/* 0dB */

drivers/media/video/tuner-core.c

@@ -21,7 +21,6 @@
 
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
-#include <media/audiochip.h>
 
 #define UNSET (-1U)
 

drivers/media/video/tvaudio.c

@@ -30,7 +30,7 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 
-#include <media/audiochip.h>
+#include <media/tvaudio.h>
 #include <media/v4l2-common.h>
 
 #include <media/i2c-addr.h>
@@ -102,7 +102,7 @@ struct CHIPDESC {
 
 	/* input switch register + values for v4l inputs */
 	int  inputreg;
-	int  inputmap[8];
+	int  inputmap[4];
 	int  inputmute;
 	int  inputmask;
 };
@@ -119,9 +119,10 @@ struct CHIPSTATE {
 	audiocmd   shadow;
 
 	/* current settings */
-	__u16 left,right,treble,bass,mode;
+	__u16 left,right,treble,bass,muted,mode;
 	int prevmode;
 	int radio;
+	int input;
 
 	/* thread */
 	pid_t                tpid;
@@ -1101,9 +1102,8 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
 static int tda8425_initialize(struct CHIPSTATE *chip)
 {
 	struct CHIPDESC *desc = chiplist + chip->type;
-	int inputmap[8] = { /* tuner	*/ TDA8425_S1_CH2, /* radio  */ TDA8425_S1_CH1,
-			    /* extern	*/ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF,
-			    /* off	*/ TDA8425_S1_OFF, /* on     */ TDA8425_S1_CH2};
+	int inputmap[4] = { /* tuner	*/ TDA8425_S1_CH2, /* radio  */ TDA8425_S1_CH1,
+			    /* extern	*/ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF};
 
 	if (chip->c.adapter->id == I2C_HW_B_RIVA) {
 		memcpy (desc->inputmap, inputmap, sizeof (inputmap));
@@ -1298,7 +1298,7 @@ static struct CHIPDESC chiplist[] = {
 		.init       = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } },
 		.inputreg   = TDA9873_SW,
 		.inputmute  = TDA9873_MUTE | TDA9873_AUTOMUTE,
-		.inputmap   = {0xa0, 0xa2, 0xa0, 0xa0, 0xc0},
+		.inputmap   = {0xa0, 0xa2, 0xa0, 0xa0},
 		.inputmask  = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE,
 
 	},
@@ -1446,8 +1446,7 @@ static struct CHIPDESC chiplist[] = {
 		.inputmap   = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER,
 			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
 			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
-			     PIC16C54_MISC_SND_MUTE,PIC16C54_MISC_SND_MUTE,
-			     PIC16C54_MISC_SND_NOTMUTE},
+			     PIC16C54_MISC_SND_MUTE},
 		.inputmute  = PIC16C54_MISC_SND_MUTE,
 	},
 	{
@@ -1583,28 +1582,40 @@ static int chip_detach(struct i2c_client *client)
 	return 0;
 }
 
+static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl)
+{
+	struct CHIPDESC *desc = chiplist + chip->type;
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->value < 0 || ctrl->value >= 2)
+			return -ERANGE;
+		chip->muted = ctrl->value;
+		if (chip->muted)
+			chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask);
+		else
+			chip_write_masked(chip,desc->inputreg,
+					desc->inputmap[chip->input],desc->inputmask);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
 /* ---------------------------------------------------------------------- */
 /* video4linux interface                                                  */
 
 static int chip_command(struct i2c_client *client,
 			unsigned int cmd, void *arg)
 {
-	__u16 *sarg = arg;
 	struct CHIPSTATE *chip = i2c_get_clientdata(client);
 	struct CHIPDESC  *desc = chiplist + chip->type;
 
 	v4l_dbg(1, debug, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd);
 
 	switch (cmd) {
-	case AUDC_SET_INPUT:
-		if (desc->flags & CHIP_HAS_INPUTSEL) {
-			if (*sarg & 0x80)
-				chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask);
-			else
-				chip_write_masked(chip,desc->inputreg,desc->inputmap[*sarg],desc->inputmask);
-		}
-		break;
-
 	case AUDC_SET_RADIO:
 		chip->radio = 1;
 		chip->watch_stereo = 0;
@@ -1668,6 +1679,24 @@ static int chip_command(struct i2c_client *client,
 		break;
 	}
 
+	case VIDIOC_S_CTRL:
+		return tvaudio_set_ctrl(chip, arg);
+
+	case VIDIOC_S_AUDIO:
+	{
+		struct v4l2_audio *sarg = arg;
+
+		if (!(desc->flags & CHIP_HAS_INPUTSEL) || sarg->index >= 4)
+				return -EINVAL;
+		/* There are four inputs: tuner, radio, extern and intern. */
+		chip->input = sarg->index;
+		if (chip->muted)
+			break;
+		chip_write_masked(chip, desc->inputreg,
+				desc->inputmap[chip->input], desc->inputmask);
+		break;
+	}
+
 	case VIDIOC_S_TUNER:
 	{
 		struct v4l2_tuner *vt = arg;

drivers/media/video/tveeprom.c

@@ -248,32 +248,32 @@ audioIC[] =
 	{AUDIO_CHIP_MSP34XX,  "MSP3410D"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3415"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3430"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3438"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3438"},
 	{AUDIO_CHIP_UNKNOWN,  "CS5331"},
 	/* 10-14 */
 	{AUDIO_CHIP_MSP34XX,  "MSP3435"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3440"},
 	{AUDIO_CHIP_MSP34XX,  "MSP3445"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3411"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3416"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3411"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3416"},
 	/* 15-19 */
 	{AUDIO_CHIP_MSP34XX,  "MSP3425"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3451"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP3418"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3451"},
+	{AUDIO_CHIP_MSP34XX,  "MSP3418"},
 	{AUDIO_CHIP_UNKNOWN,  "Type 0x12"},
 	{AUDIO_CHIP_UNKNOWN,  "OKI7716"},
 	/* 20-24 */
-	{AUDIO_CHIP_UNKNOWN,  "MSP4410"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4420"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4440"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4450"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4408"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4410"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4420"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4440"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4450"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4408"},
 	/* 25-29 */
-	{AUDIO_CHIP_UNKNOWN,  "MSP4418"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4428"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4448"},
-	{AUDIO_CHIP_UNKNOWN,  "MSP4458"},
-	{AUDIO_CHIP_UNKNOWN,  "Type 0x1d"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4418"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4428"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4448"},
+	{AUDIO_CHIP_MSP34XX,  "MSP4458"},
+	{AUDIO_CHIP_MSP34XX,  "Type 0x1d"},
 	/* 30-34 */
 	{AUDIO_CHIP_INTERNAL, "CX880"},
 	{AUDIO_CHIP_INTERNAL, "CX881"},

drivers/media/video/v4l2-common.c

@@ -312,7 +312,6 @@ static const char *v4l2_int_ioctls[] = {
 	[_IOC_NR(DECODER_DUMP)]                = "DECODER_DUMP",
 #endif
 	[_IOC_NR(AUDC_SET_RADIO)]              = "AUDC_SET_RADIO",
-	[_IOC_NR(AUDC_SET_INPUT)]              = "AUDC_SET_INPUT",
 	[_IOC_NR(MSP_SET_MATRIX)]              = "MSP_SET_MATRIX",
 
 	[_IOC_NR(TUNER_SET_TYPE_ADDR)]         = "TUNER_SET_TYPE_ADDR",
@@ -419,7 +418,6 @@ void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg)
 	case TUNER_SET_TYPE_ADDR:
 	case TUNER_SET_STANDBY:
 	case TDA9887_SET_CONFIG:
-	case AUDC_SET_INPUT:
 	case VIDIOC_OVERLAY_OLD:
 	case VIDIOC_STREAMOFF:
 	case VIDIOC_G_OUTPUT:

drivers/media/video/wm8775.c

@@ -102,11 +102,6 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd,
 		wm8775_write(client, R21, 0x100 + state->input);
 		break;
 
-	case VIDIOC_G_AUDIO:
-		memset(input, 0, sizeof(*input));
-		input->index = state->input;
-		break;
-
 	case VIDIOC_G_CTRL:
 		if (ctrl->id != V4L2_CID_AUDIO_MUTE)
 			return -EINVAL;

include/media/audiochip.h

@@ -21,18 +21,4 @@ enum audiochip {
 	AUDIO_CHIP_MSP34XX
 };
 
-/* ---------------------------------------------------------------------- */
-
-/* audio inputs */
-#define AUDIO_TUNER        0x00
-#define AUDIO_RADIO        0x01
-#define AUDIO_EXTERN       0x02
-#define AUDIO_INTERN       0x03
-#define AUDIO_OFF          0x04
-#define AUDIO_ON           0x05
-#define AUDIO_EXTERN_1     AUDIO_EXTERN
-#define AUDIO_EXTERN_2     0x06
-#define AUDIO_MUTE         0x80
-#define AUDIO_UNMUTE       0x81
-
 #endif /* AUDIOCHIP_H */

include/media/tvaudio.h

+/*
+    tvaudio.h - definition for tvaudio inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _TVAUDIO_H
+#define _TVAUDIO_H
+
+/* The tvaudio module accepts the following inputs: */
+#define TVAUDIO_INPUT_TUNER  0
+#define TVAUDIO_INPUT_RADIO  1
+#define TVAUDIO_INPUT_EXTERN 2
+#define TVAUDIO_INPUT_INTERN 3
+
+#endif

include/media/v4l2-common.h

@@ -123,9 +123,6 @@ enum v4l2_chip_ident {
 /* v4l device was opened in Radio mode, to be replaced by VIDIOC_INT_S_TUNER_MODE */
 #define AUDC_SET_RADIO        _IO('d',88)
 
-/* select from TV,radio,extern,MUTE, to be replaced with VIDIOC_INT_S_AUDIO_ROUTING */
-#define AUDC_SET_INPUT        _IOW('d',89,int)
-
 /* msp3400 ioctl: will be removed in the near future, to be replaced by
    VIDIOC_INT_S_AUDIO_ROUTING. */
 struct msp_matrix {
@@ -209,10 +206,10 @@ struct v4l2_routing {
 };
 
 /* These internal commands should be used to define the inputs and outputs
-   of an audio/video chip. They will replace AUDC_SET_INPUT.
-   The v4l2 API commands VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT,
-   VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT are meant to be used by the
-   user. Internally these commands should be used to switch inputs/outputs
+   of an audio/video chip. They will replace the v4l2 API commands
+   VIDIOC_S/G_INPUT, VIDIOC_S/G_OUTPUT, VIDIOC_S/G_AUDIO and VIDIOC_S/G_AUDOUT
+   that are meant to be used by the user.
+   The internal commands should be used to switch inputs/outputs
    because only the driver knows how to map a 'Television' input to the precise
    input/output routing of an A/D converter, or a DSP, or a video digitizer.
    These four commands should only be sent directly to an i2c device, they