Commit 8c1d0419 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (lm95241) Add support for LM95231

LM95231 is fully compatible to LM95241; only necessary change is to add
chip detection.
Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: default avatarJean Delvare <khali@linux-fr.org>
parent fffd80cc
......@@ -694,10 +694,11 @@ config SENSORS_LTC4261
be called ltc4261.
config SENSORS_LM95241
tristate "National Semiconductor LM95241 sensor chip"
tristate "National Semiconductor LM95241 and compatibles"
depends on I2C
help
If you say yes here you get support for LM95241 sensor chip.
If you say yes here you get support for LM95231 and LM95241 sensor
chips.
This driver can also be built as a module. If so, the module
will be called lm95241.
......
......@@ -74,8 +74,9 @@ static const unsigned short normal_i2c[] = {
#define TT_OFF 0
#define TT_ON 1
#define TT_MASK 7
#define MANUFACTURER_ID 0x01
#define DEFAULT_REVISION 0xA4
#define NATSEMI_MAN_ID 0x01
#define LM95231_CHIP_ID 0xA1
#define LM95241_CHIP_ID 0xA4
static const u8 lm95241_reg_address[] = {
LM95241_REG_R_LOCAL_TEMPH,
......@@ -338,20 +339,25 @@ static int lm95241_detect(struct i2c_client *new_client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
int address = new_client->addr;
const char *name;
int mfg_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
== MANUFACTURER_ID)
&& (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
== DEFAULT_REVISION)) {
name = DEVNAME;
} else {
dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
address);
mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID);
if (mfg_id != NATSEMI_MAN_ID)
return -ENODEV;
chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID);
switch (chip_id) {
case LM95231_CHIP_ID:
name = "lm95231";
break;
case LM95241_CHIP_ID:
name = "lm95241";
break;
default:
return -ENODEV;
}
......@@ -431,7 +437,8 @@ static int lm95241_remove(struct i2c_client *client)
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95241_id[] = {
{ DEVNAME, 0 },
{ "lm95231", 0 },
{ "lm95241", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95241_id);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment