ARM64: dts: amlogic: gxbb: add ethernet

Add node for ethernet interface and pinctrl pins.
Enable on odroid-C2 and P20x boards.
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -81,3 +81,9 @@ &uart_AO {
 	pinctrl-names = "default";
 };
 
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -65,3 +65,10 @@ &uart_AO {
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -274,6 +274,26 @@ mux {
 						function = "uart_c";
 					};
 				};
+
+				eth_pins: eth_c {
+					mux {
+						groups = "eth_mdio",
+						       "eth_mdc",
+						       "eth_clk_rx_clk",
+						       "eth_rx_dv",
+						       "eth_rxd0",
+						       "eth_rxd1",
+						       "eth_rxd2",
+						       "eth_rxd3",
+						       "eth_rgmii_tx_clk",
+						       "eth_tx_en",
+						       "eth_txd0",
+						       "eth_txd1",
+						       "eth_txd2",
+						       "eth_txd3";
+						function = "eth";
+					};
+				};
 			};
 		};
 
@@ -292,5 +312,17 @@ apb: apb@d0000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			clocks = <&xtal>;
+			clock-names = "stmmaceth";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
 	};
 };