ASoC: AMD: Do not generate interrups for every captured sample

On capture, audio data is first copied from I2S to ACP memory, and then
from ACP to SYSRAM.  The I2S_TO_ACP_DMA interrupt fires on every sample
transferred from I2S to ACP memory.  That is it fires ~48000 times per
second when capturing @ 48 kHz.  Since we don't do anything on this
interrupt anyway, disable it to save quite a few unnecessary interrupts.
The real "work" (calling snd_pcm_period_elapsed()) is done when transfer
from ACP to SYSRAM is complete.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/amd/acp-pcm-dma.c

@@ -412,10 +412,8 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num)
 	switch (ch_num) {
 	case ACP_TO_I2S_DMA_CH_NUM:
 	case ACP_TO_SYSRAM_CH_NUM:
-	case I2S_TO_ACP_DMA_CH_NUM:
 	case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM:
 	case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM:
-	case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM:
 		dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK;
 		break;
 	default:
@@ -704,12 +702,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) {
 		valid_irq = true;
 		snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream);
@@ -718,13 +710,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg)
 			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
 	}
 
-	if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) {
-		valid_irq = true;
-		acp_reg_write((intr_flag &
-			      BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16,
-			      acp_mmio, mmACP_EXTERNAL_INTR_STAT);
-	}
-
 	if (valid_irq)
 		return IRQ_HANDLED;
 	else