Commit 8c6bda1a authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[TG3]: Fix tg3_set_power_state()

Fix tg3_set_power_state to drive GPIOs properly based on the
TG3_FLAG_EEPROM_WRITE_PROTECT flag. Some delays are also added after D0
and D3 power state changes.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 314fba34
......@@ -1005,8 +1005,13 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
pci_write_config_word(tp->pdev,
pm + PCI_PM_CTRL,
power_control);
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
udelay(100); /* Delay after power state change */
/* Switch out of Vaux if it is not a LOM */
if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)) {
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
}
return 0;
......@@ -1151,6 +1156,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
/* Finally, set the new power state. */
pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
udelay(100); /* Delay after power state change */
tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment