Commit 8cf43455 authored by Agrawal, Nitesh-kumar's avatar Agrawal, Nitesh-kumar Committed by Linus Walleij

pinctrl/amd: Remove the default de-bounce time

In the function amd_gpio_irq_enable() and
amd_gpio_direction_input(), remove the code which is setting
the default de-bounce time to 2.75ms.

The driver code shall use the same settings as specified in
BIOS. Any default assignment impacts TouchPad behaviour when
the LevelTrig is set to EDGE FALLING.

Cc: stable@vger.kernel.org
Reviewed-by: default avatar  Ken Xue <Ken.Xue@amd.com>
Signed-off-by: default avatarNitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b120a3c2
......@@ -43,17 +43,6 @@ static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + offset * 4);
/*
* Suppose BIOS or Bootloader sets specific debounce for the
* GPIO. if not, set debounce to be 2.75ms and remove glitch.
*/
if ((pin_reg & DB_TMR_OUT_MASK) == 0) {
pin_reg |= 0xf;
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
}
pin_reg &= ~BIT(OUTPUT_ENABLE_OFF);
writel(pin_reg, gpio_dev->base + offset * 4);
spin_unlock_irqrestore(&gpio_dev->lock, flags);
......@@ -326,15 +315,6 @@ static void amd_gpio_irq_enable(struct irq_data *d)
spin_lock_irqsave(&gpio_dev->lock, flags);
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
/*
Suppose BIOS or Bootloader sets specific debounce for the
GPIO. if not, set debounce to be 2.75ms.
*/
if ((pin_reg & DB_TMR_OUT_MASK) == 0) {
pin_reg |= 0xf;
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
}
pin_reg |= BIT(INTERRUPT_ENABLE_OFF);
pin_reg |= BIT(INTERRUPT_MASK_OFF);
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment