net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries
The commit (SHA1: 5c844d57) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment