arm64: dts: meson-gxbb: Fix node order

Sort nodes referenced by label alphabetically.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -97,13 +97,6 @@ usb1: usb@c9100000 {
 	};
 };
 
-&ethmac {
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
 &aobus {
 	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
@@ -252,6 +245,102 @@ mux {
 	};
 };
 
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -521,67 +610,6 @@ mux {
 	};
 };
 
-&hiubus {
-	clkc: clock-controller@0 {
-		compatible = "amlogic,gxbb-clkc";
-		#clock-cells = <1>;
-		reg = <0x0 0x0 0x0 0x3db>;
-	};
-};
-
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
-	};
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
 &saradc {
 	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
 	clocks = <&xtal>,
@@ -620,20 +648,3 @@ &spifc {
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
-
-&hwrng {
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};