Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3',...

Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-5.3', 'ib-mfd-clk-regulator-rtc-5.3', 'ib-mfd-cros-5.3' and 'ib-mfd-regulator-5.3' into ibs-for-mfd-merged

Documentation/devicetree/bindings/mfd/lp87565.txt

@@ -41,3 +41,39 @@ lp87565_pmic: pmic@60 {
 		};
 	};
 };
+
+TI LP87561 PMIC:
+
+This is a single output 4-phase regulator configuration
+
+Required properties:
+  - compatible:	"ti,lp87561-q1"
+  - reg:		I2C slave address.
+  - gpio-controller:	Marks the device node as a GPIO Controller.
+  - #gpio-cells:	Should be two.  The first cell is the pin number and
+			the second cell is used to specify flags.
+			See ../gpio/gpio.txt for more information.
+  - xxx-in-supply:	Phandle to parent supply node of each regulator
+			populated under regulators node. xxx should match
+			the supply_name populated in driver.
+Example:
+
+lp87561_pmic: pmic@62 {
+	compatible = "ti,lp87561-q1";
+	reg = <0x62>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	buck3210-in-supply = <&vsys_3v3>;
+
+	regulators: regulators {
+		buck3210_reg: buck3210 {
+			/* VDD_CORE */
+			regulator-name = "buck3210";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};

Documentation/devicetree/bindings/mfd/rk808.txt

@@ -3,11 +3,15 @@ RK8XX Power Management Integrated Circuit
 The rk8xx family current members:
 rk805
 rk808
+rk809
+rk817
 rk818
 
 Required properties:
 - compatible: "rockchip,rk805"
 - compatible: "rockchip,rk808"
+- compatible: "rockchip,rk809"
+- compatible: "rockchip,rk817"
 - compatible: "rockchip,rk818"
 - reg: I2C slave address
 - interrupts: the interrupt outputs of the controller.
@@ -45,6 +49,23 @@ Optional RK808 properties:
   the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
   very quickly with no slow ramp time.
 
+Optional shared RK809 and RK817 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
+- vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
+- vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
+
+Optional RK809 properties:
+- vcc8-supply:  The input supply for SWITCH_REG1
+- vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
+
+Optional RK817 properties:
+- vcc8-supply:  The input supply for BOOST
+- vcc9-supply:  The input supply for OTG_SWITCH
+
 Optional RK818 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
@@ -86,6 +107,21 @@ number as described in RK808 datasheet.
 	- SWITCH_REGn
 		- valid values for n are 1 to 2
 
+Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK809 and RK817 datasheets.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 5 for RK809.
+		- valid values for n are 1 to 4 for RK817.
+	- LDO_REGn
+		- valid values for n are 1 to 9 for RK809.
+		- valid values for n are 1 to 9 for RK817.
+	- SWITCH_REGn
+		- valid values for n are 1 to 2 for RK809.
+	- BOOST for RK817
+	- OTG_SWITCH for RK817
+
 Following regulators of the RK818 PMIC block are supported. Note that
 the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
 number as described in RK818 datasheet.
@@ -98,6 +134,14 @@ number as described in RK818 datasheet.
 	- HDMI_SWITCH
 	- OTG_SWITCH
 
+It is necessary to configure three pins for both the RK809 and RK817, the three
+pins are "gpio_ts" "gpio_gt" "gpio_slp".
+	The gpio_gt and gpio_ts pins support the gpio function.
+	The gpio_slp pin is for controlling the pmic states, as below:
+		- reset
+		- power down
+		- sleep
+
 Standard regulator bindings are used inside regulator subnodes. Check
   Documentation/devicetree/bindings/regulator/regulator.txt
 for more details

drivers/clk/Kconfig

@@ -53,13 +53,12 @@ config COMMON_CLK_MAX9485
 	  This driver supports Maxim 9485 Programmable Audio Clock Generator
 
 config COMMON_CLK_RK808
-	tristate "Clock driver for RK805/RK808/RK818"
+	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
 	depends on MFD_RK808
 	---help---
-	  This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
-	  multi-function devices have two fixed-rate oscillators,
-	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
-	  by control register.
+	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
+	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
+	  Clkout1 is always on, Clkout2 can off by control register.
 
 config COMMON_CLK_HI655X
 	tristate "Clock driver for Hi655x" if EXPERT

drivers/clk/clk-rk808.c

@@ -96,6 +96,68 @@ of_clk_rk808_get(struct of_phandle_args *clkspec, void *data)
 	return idx ? &rk808_clkout->clkout2_hw : &rk808_clkout->clkout1_hw;
 }
 
+static int rk817_clkout2_enable(struct clk_hw *hw, bool enable)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+
+	return regmap_update_bits(rk808->regmap, RK817_SYS_CFG(1),
+				  RK817_CLK32KOUT2_EN,
+				  enable ? RK817_CLK32KOUT2_EN : 0);
+}
+
+static int rk817_clkout2_prepare(struct clk_hw *hw)
+{
+	return rk817_clkout2_enable(hw, true);
+}
+
+static void rk817_clkout2_unprepare(struct clk_hw *hw)
+{
+	rk817_clkout2_enable(hw, false);
+}
+
+static int rk817_clkout2_is_prepared(struct clk_hw *hw)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+	unsigned int val;
+
+	int ret = regmap_read(rk808->regmap, RK817_SYS_CFG(1), &val);
+
+	if (ret < 0)
+		return 0;
+
+	return (val & RK817_CLK32KOUT2_EN) ? 1 : 0;
+}
+
+static const struct clk_ops rk817_clkout2_ops = {
+	.prepare = rk817_clkout2_prepare,
+	.unprepare = rk817_clkout2_unprepare,
+	.is_prepared = rk817_clkout2_is_prepared,
+	.recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static const struct clk_ops *rkpmic_get_ops(long variant)
+{
+	switch (variant) {
+	case RK809_ID:
+	case RK817_ID:
+		return &rk817_clkout2_ops;
+	/*
+	 * For the default case, it match the following PMIC type.
+	 * RK805_ID
+	 * RK808_ID
+	 * RK818_ID
+	 */
+	default:
+		return &rk808_clkout2_ops;
+	}
+}
+
 static int rk808_clkout_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
@@ -127,7 +189,7 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 		return ret;
 
 	init.name = "rk808-clkout2";
-	init.ops = &rk808_clkout2_ops;
+	init.ops = rkpmic_get_ops(rk808->variant);
 	rk808_clkout->clkout2_hw.init = &init;
 
 	/* optional override of the clockname */

drivers/mfd/Kconfig

@@ -1030,14 +1030,14 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
+	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK805, RK808 and RK818
-	  Power Management chips.
+	  If you say yes here you get support for the RK805, RK808, RK809,
+	  RK817 and RK818 Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices
 	  including interrupts, RTC, LDO & DCDC regulators, and onkey.

drivers/mfd/lp87565.c

@@ -33,6 +33,10 @@ static const struct of_device_id of_lp87565_match_table[] = {
 		.compatible = "ti,lp87565-q1",
 		.data = (void *)LP87565_DEVICE_TYPE_LP87565_Q1,
 	},
+	{
+		.compatible = "ti,lp87561-q1",
+		.data = (void *)LP87565_DEVICE_TYPE_LP87561_Q1,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, of_lp87565_match_table);

drivers/mfd/rk808.c

@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#include <linux/syscore_ops.h>
 
 struct rk808_reg_data {
 	int addr;
@@ -62,6 +63,27 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	return false;
 }
 
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Notes:
+	 * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+	 *   we don't use that feature.  It's better to cache.
+	 */
+
+	switch (reg) {
+	case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+	case RK817_RTC_STATUS_REG:
+	case RK817_INT_STS_REG0:
+	case RK817_INT_STS_REG1:
+	case RK817_INT_STS_REG2:
+	case RK817_SYS_STS:
+		return true;
+	}
+
+	return true;
+}
+
 static const struct regmap_config rk818_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -86,6 +108,14 @@ static const struct regmap_config rk808_regmap_config = {
 	.volatile_reg = rk808_is_volatile_reg,
 };
 
+static const struct regmap_config rk817_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK817_GPIO_INT_CFG,
+	.cache_type = REGCACHE_NONE,
+	.volatile_reg = rk817_is_volatile_reg,
+};
+
 static struct resource rtc_resources[] = {
 	{
 		.start  = RK808_IRQ_RTC_ALARM,
@@ -94,6 +124,10 @@ static struct resource rtc_resources[] = {
 	}
 };
 
+static struct resource rk817_rtc_resources[] = {
+	DEFINE_RES_IRQ(RK817_IRQ_RTC_ALARM),
+};
+
 static struct resource rk805_key_resources[] = {
 	{
 		.start  = RK805_IRQ_PWRON_FALL,
@@ -107,6 +141,11 @@ static struct resource rk805_key_resources[] = {
 	}
 };
 
+static struct resource rk817_pwrkey_resources[] = {
+	DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE),
+	DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL),
+};
+
 static const struct mfd_cell rk805s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -132,6 +171,21 @@ static const struct mfd_cell rk808s[] = {
 	},
 };
 
+static const struct mfd_cell rk817s[] = {
+	{ .name = "rk808-clkout",},
+	{ .name = "rk808-regulator",},
+	{
+		.name = "rk8xx-pwrkey",
+		.num_resources = ARRAY_SIZE(rk817_pwrkey_resources),
+		.resources = &rk817_pwrkey_resources[0],
+	},
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rk817_rtc_resources),
+		.resources = &rk817_rtc_resources[0],
+	},
+};
+
 static const struct mfd_cell rk818s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -167,6 +221,13 @@ static const struct rk808_reg_data rk808_pre_init_reg[] = {
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct rk808_reg_data rk817_pre_init_reg[] = {
+	{RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP},
+	{RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_H},
+	{RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK,
+					   RK817_HOTDIE_105 | RK817_TSD_140},
+};
+
 static const struct rk808_reg_data rk818_pre_init_reg[] = {
 	/* improve efficiency */
 	{ RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK,  BUCK_ILMIN_250MA },
@@ -332,6 +393,33 @@ static const struct regmap_irq rk818_irqs[] = {
 	},
 };
 
+static const struct regmap_irq rk817_irqs[RK817_IRQ_END] = {
+	REGMAP_IRQ_REG_LINE(0, 8),
+	REGMAP_IRQ_REG_LINE(1, 8),
+	REGMAP_IRQ_REG_LINE(2, 8),
+	REGMAP_IRQ_REG_LINE(3, 8),
+	REGMAP_IRQ_REG_LINE(4, 8),
+	REGMAP_IRQ_REG_LINE(5, 8),
+	REGMAP_IRQ_REG_LINE(6, 8),
+	REGMAP_IRQ_REG_LINE(7, 8),
+	REGMAP_IRQ_REG_LINE(8, 8),
+	REGMAP_IRQ_REG_LINE(9, 8),
+	REGMAP_IRQ_REG_LINE(10, 8),
+	REGMAP_IRQ_REG_LINE(11, 8),
+	REGMAP_IRQ_REG_LINE(12, 8),
+	REGMAP_IRQ_REG_LINE(13, 8),
+	REGMAP_IRQ_REG_LINE(14, 8),
+	REGMAP_IRQ_REG_LINE(15, 8),
+	REGMAP_IRQ_REG_LINE(16, 8),
+	REGMAP_IRQ_REG_LINE(17, 8),
+	REGMAP_IRQ_REG_LINE(18, 8),
+	REGMAP_IRQ_REG_LINE(19, 8),
+	REGMAP_IRQ_REG_LINE(20, 8),
+	REGMAP_IRQ_REG_LINE(21, 8),
+	REGMAP_IRQ_REG_LINE(22, 8),
+	REGMAP_IRQ_REG_LINE(23, 8)
+};
+
 static struct regmap_irq_chip rk805_irq_chip = {
 	.name = "rk805",
 	.irqs = rk805_irqs,
@@ -355,6 +443,18 @@ static const struct regmap_irq_chip rk808_irq_chip = {
 	.init_ack_masked = true,
 };
 
+static struct regmap_irq_chip rk817_irq_chip = {
+	.name = "rk817",
+	.irqs = rk817_irqs,
+	.num_irqs = ARRAY_SIZE(rk817_irqs),
+	.num_regs = 3,
+	.irq_reg_stride = 2,
+	.status_base = RK817_INT_STS_REG0,
+	.mask_base = RK817_INT_STS_MSK_REG0,
+	.ack_base = RK817_INT_STS_REG0,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk818_irq_chip = {
 	.name = "rk818",
 	.irqs = rk818_irqs,
@@ -423,9 +523,33 @@ static void rk818_device_shutdown(void)
 		dev_err(&rk808_i2c_client->dev, "power off error!\n");
 }
 
+static void rk8xx_syscore_shutdown(void)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	int ret;
+
+	if (system_state == SYSTEM_POWER_OFF &&
+	    (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) {
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_DN_FUN);
+		if (ret) {
+			dev_warn(&rk808_i2c_client->dev,
+				 "Cannot switch to power down function\n");
+		}
+	}
+}
+
+static struct syscore_ops rk808_syscore_ops = {
+	.shutdown = rk8xx_syscore_shutdown,
+};
+
 static const struct of_device_id rk808_of_match[] = {
 	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
+	{ .compatible = "rockchip,rk809" },
+	{ .compatible = "rockchip,rk817" },
 	{ .compatible = "rockchip,rk818" },
 	{ },
 };
@@ -438,10 +562,11 @@ static int rk808_probe(struct i2c_client *client,
 	struct rk808 *rk808;
 	const struct rk808_reg_data *pre_init_reg;
 	const struct mfd_cell *cells;
-	void (*pm_pwroff_fn)(void);
+	void (*pm_pwroff_fn)(void) = NULL;
 	int nr_pre_init_regs;
 	int nr_cells;
 	int pm_off = 0, msb, lsb;
+	unsigned char pmic_id_msb, pmic_id_lsb;
 	int ret;
 	int i;
 
@@ -449,15 +574,24 @@ static int rk808_probe(struct i2c_client *client,
 	if (!rk808)
 		return -ENOMEM;
 
+	if (of_device_is_compatible(np, "rockchip,rk817") ||
+	    of_device_is_compatible(np, "rockchip,rk809")) {
+		pmic_id_msb = RK817_ID_MSB;
+		pmic_id_lsb = RK817_ID_LSB;
+	} else {
+		pmic_id_msb = RK808_ID_MSB;
+		pmic_id_lsb = RK808_ID_LSB;
+	}
+
 	/* Read chip variant */
-	msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
+	msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
 	if (msb < 0) {
 		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
 			RK808_ID_MSB);
 		return msb;
 	}
 
-	lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
+	lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
 	if (lsb < 0) {
 		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
 			RK808_ID_LSB);
@@ -495,6 +629,16 @@ static int rk808_probe(struct i2c_client *client,
 		nr_cells = ARRAY_SIZE(rk818s);
 		pm_pwroff_fn = rk818_device_shutdown;
 		break;
+	case RK809_ID:
+	case RK817_ID:
+		rk808->regmap_cfg = &rk817_regmap_config;
+		rk808->regmap_irq_chip = &rk817_irq_chip;
+		pre_init_reg = rk817_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
+		cells = rk817s;
+		nr_cells = ARRAY_SIZE(rk817s);
+		register_syscore_ops(&rk808_syscore_ops);
+		break;
 	default:
 		dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
 			rk808->variant);
@@ -568,10 +712,52 @@ static int rk808_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int rk8xx_suspend(struct device *dev)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	int ret = 0;
+
+	switch (rk808->variant) {
+	case RK809_ID:
+	case RK817_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_SLP_FUN);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static int rk8xx_resume(struct device *dev)
+{
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+	int ret = 0;
+
+	switch (rk808->variant) {
+	case RK809_ID:
+	case RK817_ID:
+		ret = regmap_update_bits(rk808->regmap,
+					 RK817_SYS_CFG(3),
+					 RK817_SLPPIN_FUNC_MSK,
+					 SLPPIN_NULL_FUN);
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
+
 static struct i2c_driver rk808_i2c_driver = {
 	.driver = {
 		.name = "rk808",
 		.of_match_table = rk808_of_match,
+		.pm = &rk8xx_pm_ops,
 	},
 	.probe    = rk808_probe,
 	.remove   = rk808_remove,

drivers/regulator/Kconfig

@@ -762,11 +762,11 @@ config REGULATOR_RC5T583
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RK808
-	tristate "Rockchip RK805/RK808/RK818 Power regulators"
+	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
 	depends on MFD_RK808
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
-	  PMIC RK805,RK808 and RK818.
+	  PMIC RK805,RK809&RK817,RK808 and RK818.
 	  This driver supports the control of different power rails of device
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.

drivers/regulator/lp87565-regulator.c

@@ -153,6 +153,12 @@ static const struct lp87565_regulator regulators[] = {
 			  LP87565_REG_BUCK2_CTRL_1,
 			  LP87565_BUCK_CTRL_1_EN, 3230,
 			  buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
+	LP87565_REGULATOR("BUCK3210", LP87565_BUCK_3210, "buck3210",
+			  lp87565_buck_ops, 256, LP87565_REG_BUCK0_VOUT,
+			  LP87565_BUCK_VSET, LP87565_REG_BUCK0_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN |
+			  LP87565_BUCK_CTRL_1_FPWM_MP_0_2, 3230,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
 };
 
 static int lp87565_regulator_probe(struct platform_device *pdev)
@@ -169,9 +175,19 @@ static int lp87565_regulator_probe(struct platform_device *pdev)
 	config.driver_data = lp87565;
 	config.regmap = lp87565->regmap;
 
-	if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
+	switch (lp87565->dev_type) {
+	case LP87565_DEVICE_TYPE_LP87565_Q1:
 		min_idx = LP87565_BUCK_10;
 		max_idx = LP87565_BUCK_23;
+		break;
+	case LP87565_DEVICE_TYPE_LP87561_Q1:
+		min_idx = LP87565_BUCK_3210;
+		max_idx = LP87565_BUCK_3210;
+		break;
+	default:
+		dev_err(lp87565->dev, "Invalid lp config %d\n",
+			lp87565->dev_type);
+		return -EINVAL;
 	}
 
 	for (i = min_idx; i <= max_idx; i++) {

drivers/rtc/Kconfig

@@ -373,11 +373,11 @@ config RTC_DRV_MAX77686
 	  will be called rtc-max77686.
 
 config RTC_DRV_RK808
-	tristate "Rockchip RK805/RK808/RK818 RTC"
+	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
 	depends on MFD_RK808
 	help
 	  If you say yes here you will get support for the
-	  RTC of RK805, RK808 and RK818 PMIC.
+	  RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rk808-rtc.

drivers/rtc/rtc-rk808.c

@@ -50,9 +50,18 @@
 #define NUM_TIME_REGS	(RK808_WEEKS_REG - RK808_SECONDS_REG + 1)
 #define NUM_ALARM_REGS	(RK808_ALARM_YEARS_REG - RK808_ALARM_SECONDS_REG + 1)
 
+struct rk_rtc_compat_reg {
+	unsigned int ctrl_reg;
+	unsigned int status_reg;
+	unsigned int alarm_seconds_reg;
+	unsigned int int_reg;
+	unsigned int seconds_reg;
+};
+
 struct rk808_rtc {
 	struct rk808 *rk808;
 	struct rtc_device *rtc;
+	struct rk_rtc_compat_reg *creg;
 	int irq;
 };
 
@@ -101,7 +110,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 	int ret;
 
 	/* Force an update of the shadowed registers right now */
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME);
 	if (ret) {
@@ -115,7 +124,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 	 * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
 	 * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
 	 */
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
 				 0);
 	if (ret) {
@@ -123,7 +132,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 		return ret;
 	}
 
-	ret = regmap_bulk_read(rk808->regmap, RK808_SECONDS_REG,
+	ret = regmap_bulk_read(rk808->regmap, rk808_rtc->creg->seconds_reg,
 			       rtc_data, NUM_TIME_REGS);
 	if (ret) {
 		dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
@@ -162,7 +171,7 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	rtc_data[6] = bin2bcd(tm->tm_wday);
 
 	/* Stop RTC while updating the RTC registers */
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M);
 	if (ret) {
@@ -170,14 +179,14 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		return ret;
 	}
 
-	ret = regmap_bulk_write(rk808->regmap, RK808_SECONDS_REG,
+	ret = regmap_bulk_write(rk808->regmap, rk808_rtc->creg->seconds_reg,
 				rtc_data, NUM_TIME_REGS);
 	if (ret) {
 		dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
 		return ret;
 	}
 	/* Start RTC again */
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
 	if (ret) {
 		dev_err(dev, "Failed to update RTC control: %d\n", ret);
@@ -195,8 +204,13 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	uint32_t int_reg;
 	int ret;
 
-	ret = regmap_bulk_read(rk808->regmap, RK808_ALARM_SECONDS_REG,
+	ret = regmap_bulk_read(rk808->regmap,
+			       rk808_rtc->creg->alarm_seconds_reg,
 			       alrm_data, NUM_ALARM_REGS);
+	if (ret) {
+		dev_err(dev, "Failed to read RTC alarm date REG: %d\n", ret);
+		return ret;
+	}
 
 	alrm->time.tm_sec = bcd2bin(alrm_data[0] & SECONDS_REG_MSK);
 	alrm->time.tm_min = bcd2bin(alrm_data[1] & MINUTES_REG_MAK);
@@ -206,7 +220,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
 	rockchip_to_gregorian(&alrm->time);
 
-	ret = regmap_read(rk808->regmap, RK808_RTC_INT_REG, &int_reg);
+	ret = regmap_read(rk808->regmap, rk808_rtc->creg->int_reg, &int_reg);
 	if (ret) {
 		dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
 		return ret;
@@ -225,7 +239,7 @@ static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
 	struct rk808 *rk808 = rk808_rtc->rk808;
 	int ret;
 
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
 
 	return ret;
@@ -236,7 +250,7 @@ static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
 	struct rk808 *rk808 = rk808_rtc->rk808;
 	int ret;
 
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_INT_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 
@@ -266,7 +280,8 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
 	alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
 
-	ret = regmap_bulk_write(rk808->regmap, RK808_ALARM_SECONDS_REG,
+	ret = regmap_bulk_write(rk808->regmap,
+				rk808_rtc->creg->alarm_seconds_reg,
 				alrm_data, NUM_ALARM_REGS);
 	if (ret) {
 		dev_err(dev, "Failed to bulk write: %d\n", ret);
@@ -310,7 +325,7 @@ static irqreturn_t rk808_alarm_irq(int irq, void *data)
 	struct i2c_client *client = rk808->i2c;
 	int ret;
 
-	ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+	ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
 			   RTC_STATUS_MASK);
 	if (ret) {
 		dev_err(&client->dev,
@@ -361,6 +376,22 @@ static int rk808_rtc_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rk808_rtc_pm_ops,
 	rk808_rtc_suspend, rk808_rtc_resume);
 
+static struct rk_rtc_compat_reg rk808_creg = {
+	.ctrl_reg = RK808_RTC_CTRL_REG,
+	.status_reg = RK808_RTC_STATUS_REG,
+	.alarm_seconds_reg = RK808_ALARM_SECONDS_REG,
+	.int_reg = RK808_RTC_INT_REG,
+	.seconds_reg = RK808_SECONDS_REG,
+};
+
+static struct rk_rtc_compat_reg rk817_creg = {
+	.ctrl_reg = RK817_RTC_CTRL_REG,
+	.status_reg = RK817_RTC_STATUS_REG,
+	.alarm_seconds_reg = RK817_ALARM_SECONDS_REG,
+	.int_reg = RK817_RTC_INT_REG,
+	.seconds_reg = RK817_SECONDS_REG,
+};
+
 static int rk808_rtc_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
@@ -371,11 +402,20 @@ static int rk808_rtc_probe(struct platform_device *pdev)
 	if (rk808_rtc == NULL)
 		return -ENOMEM;
 
+	switch (rk808->variant) {
+	case RK809_ID:
+	case RK817_ID:
+		rk808_rtc->creg = &rk817_creg;
+		break;
+	default:
+		rk808_rtc->creg = &rk808_creg;
+		break;
+	}
 	platform_set_drvdata(pdev, rk808_rtc);
 	rk808_rtc->rk808 = rk808;
 
 	/* start rtc running by default, and use shadowed timer. */
-	ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
+	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M |
 				 BIT_RTC_CTRL_REG_RTC_READSEL_M,
 				 BIT_RTC_CTRL_REG_RTC_READSEL_M);
@@ -385,7 +425,7 @@ static int rk808_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = regmap_write(rk808->regmap, RK808_RTC_STATUS_REG,
+	ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
 			   RTC_STATUS_MASK);
 	if (ret) {
 		dev_err(&pdev->dev,

include/linux/mfd/lp87565.h

@@ -17,6 +17,7 @@
 
 enum lp87565_device_type {
 	LP87565_DEVICE_TYPE_UNKNOWN	= 0,
+	LP87565_DEVICE_TYPE_LP87561_Q1,
 	LP87565_DEVICE_TYPE_LP87565_Q1,
 };
 
@@ -249,6 +250,7 @@ enum LP87565_regulator_id {
 	LP87565_BUCK_3,
 	LP87565_BUCK_10,
 	LP87565_BUCK_23,
+	LP87565_BUCK_3210,
 };
 
 /**

include/linux/mfd/rk808.h

@@ -382,6 +382,7 @@ enum rk805_reg {
 #define SWITCH1_EN	BIT(5)
 #define DEV_OFF_RST	BIT(3)
 #define DEV_OFF		BIT(0)
+#define RTC_STOP	BIT(0)
 
 #define VB_LO_ACT		BIT(4)
 #define VB_LO_SEL_3500MV	(7 << 0)
@@ -395,7 +396,179 @@ enum rk805_reg {
 #define SHUTDOWN_FUN			(0x2 << 2)
 #define SLEEP_FUN			(0x1 << 2)
 #define RK8XX_ID_MSK			0xfff0
+#define PWM_MODE_MSK			BIT(7)
 #define FPWM_MODE			BIT(7)
+#define AUTO_PWM_MODE			0
+
+enum rk817_reg_id {
+	RK817_ID_DCDC1 = 0,
+	RK817_ID_DCDC2,
+	RK817_ID_DCDC3,
+	RK817_ID_DCDC4,
+	RK817_ID_LDO1,
+	RK817_ID_LDO2,
+	RK817_ID_LDO3,
+	RK817_ID_LDO4,
+	RK817_ID_LDO5,
+	RK817_ID_LDO6,
+	RK817_ID_LDO7,
+	RK817_ID_LDO8,
+	RK817_ID_LDO9,
+	RK817_ID_BOOST,
+	RK817_ID_BOOST_OTG_SW,
+	RK817_NUM_REGULATORS
+};
+
+enum rk809_reg_id {
+	RK809_ID_DCDC5 = RK817_ID_BOOST,
+	RK809_ID_SW1,
+	RK809_ID_SW2,
+	RK809_NUM_REGULATORS
+};
+
+#define RK817_SECONDS_REG		0x00
+#define RK817_MINUTES_REG		0x01
+#define RK817_HOURS_REG			0x02
+#define RK817_DAYS_REG			0x03
+#define RK817_MONTHS_REG		0x04
+#define RK817_YEARS_REG			0x05
+#define RK817_WEEKS_REG			0x06
+#define RK817_ALARM_SECONDS_REG		0x07
+#define RK817_ALARM_MINUTES_REG		0x08
+#define RK817_ALARM_HOURS_REG		0x09
+#define RK817_ALARM_DAYS_REG		0x0a
+#define RK817_ALARM_MONTHS_REG		0x0b
+#define RK817_ALARM_YEARS_REG		0x0c
+#define RK817_RTC_CTRL_REG		0xd
+#define RK817_RTC_STATUS_REG		0xe
+#define RK817_RTC_INT_REG		0xf
+#define RK817_RTC_COMP_LSB_REG		0x10
+#define RK817_RTC_COMP_MSB_REG		0x11
+
+#define RK817_POWER_EN_REG(i)		(0xb1 + (i))
+#define RK817_POWER_SLP_EN_REG(i)	(0xb5 + (i))
+
+#define RK817_POWER_CONFIG		(0xb9)
+
+#define RK817_BUCK_CONFIG_REG(i)	(0xba + (i) * 3)
+
+#define RK817_BUCK1_ON_VSEL_REG		0xBB
+#define RK817_BUCK1_SLP_VSEL_REG	0xBC
+
+#define RK817_BUCK2_CONFIG_REG		0xBD
+#define RK817_BUCK2_ON_VSEL_REG		0xBE
+#define RK817_BUCK2_SLP_VSEL_REG	0xBF
+
+#define RK817_BUCK3_CONFIG_REG		0xC0
+#define RK817_BUCK3_ON_VSEL_REG		0xC1
+#define RK817_BUCK3_SLP_VSEL_REG	0xC2
+
+#define RK817_BUCK4_CONFIG_REG		0xC3
+#define RK817_BUCK4_ON_VSEL_REG		0xC4
+#define RK817_BUCK4_SLP_VSEL_REG	0xC5
+
+#define RK817_LDO_ON_VSEL_REG(idx)	(0xcc + (idx) * 2)
+#define RK817_BOOST_OTG_CFG		(0xde)
+
+#define RK817_ID_MSB			0xed
+#define RK817_ID_LSB			0xee
+
+#define RK817_SYS_STS			0xf0
+#define RK817_SYS_CFG(i)		(0xf1 + (i))
+
+#define RK817_ON_SOURCE_REG		0xf5
+#define RK817_OFF_SOURCE_REG		0xf6
+
+/* INTERRUPT REGISTER */
+#define RK817_INT_STS_REG0		0xf8
+#define RK817_INT_STS_MSK_REG0		0xf9
+#define RK817_INT_STS_REG1		0xfa
+#define RK817_INT_STS_MSK_REG1		0xfb
+#define RK817_INT_STS_REG2		0xfc
+#define RK817_INT_STS_MSK_REG2		0xfd
+#define RK817_GPIO_INT_CFG		0xfe
+
+/* IRQ Definitions */
+#define RK817_IRQ_PWRON_FALL		0
+#define RK817_IRQ_PWRON_RISE		1
+#define RK817_IRQ_PWRON			2
+#define RK817_IRQ_PWMON_LP		3
+#define RK817_IRQ_HOTDIE		4
+#define RK817_IRQ_RTC_ALARM		5
+#define RK817_IRQ_RTC_PERIOD		6
+#define RK817_IRQ_VB_LO			7
+#define RK817_IRQ_PLUG_IN		8
+#define RK817_IRQ_PLUG_OUT		9
+#define RK817_IRQ_CHRG_TERM		10
+#define RK817_IRQ_CHRG_TIME		11
+#define RK817_IRQ_CHRG_TS		12
+#define RK817_IRQ_USB_OV		13
+#define RK817_IRQ_CHRG_IN_CLMP		14
+#define RK817_IRQ_BAT_DIS_ILIM		15
+#define RK817_IRQ_GATE_GPIO		16
+#define RK817_IRQ_TS_GPIO		17
+#define RK817_IRQ_CODEC_PD		18
+#define RK817_IRQ_CODEC_PO		19
+#define RK817_IRQ_CLASSD_MUTE_DONE	20
+#define RK817_IRQ_CLASSD_OCP		21
+#define RK817_IRQ_BAT_OVP               22
+#define RK817_IRQ_CHRG_BAT_HI		23
+#define RK817_IRQ_END			(RK817_IRQ_CHRG_BAT_HI + 1)
+
+/*
+ * rtc_ctrl 0xd
+ * same as 808, except bit4
+ */
+#define RK817_RTC_CTRL_RSV4		BIT(4)
+
+/* power config 0xb9 */
+#define RK817_BUCK3_FB_RES_MSK		BIT(6)
+#define RK817_BUCK3_FB_RES_INTER	BIT(6)
+#define RK817_BUCK3_FB_RES_EXT		0
+
+/* buck config 0xba */
+#define RK817_RAMP_RATE_OFFSET		6
+#define RK817_RAMP_RATE_MASK		(0x3 << RK817_RAMP_RATE_OFFSET)
+#define RK817_RAMP_RATE_3MV_PER_US	(0x0 << RK817_RAMP_RATE_OFFSET)
+#define RK817_RAMP_RATE_6_3MV_PER_US	(0x1 << RK817_RAMP_RATE_OFFSET)
+#define RK817_RAMP_RATE_12_5MV_PER_US	(0x2 << RK817_RAMP_RATE_OFFSET)
+#define RK817_RAMP_RATE_25MV_PER_US	(0x3 << RK817_RAMP_RATE_OFFSET)
+
+/* sys_cfg1 0xf2 */
+#define RK817_HOTDIE_TEMP_MSK		(0x3 << 4)
+#define RK817_HOTDIE_85			(0x0 << 4)
+#define RK817_HOTDIE_95			(0x1 << 4)
+#define RK817_HOTDIE_105		(0x2 << 4)
+#define RK817_HOTDIE_115		(0x3 << 4)
+
+#define RK817_TSD_TEMP_MSK		BIT(6)
+#define RK817_TSD_140			0
+#define RK817_TSD_160			BIT(6)
+
+#define RK817_CLK32KOUT2_EN		BIT(7)
+
+/* sys_cfg3 0xf4 */
+#define RK817_SLPPIN_FUNC_MSK		(0x3 << 3)
+#define SLPPIN_NULL_FUN			(0x0 << 3)
+#define SLPPIN_SLP_FUN			(0x1 << 3)
+#define SLPPIN_DN_FUN			(0x2 << 3)
+#define SLPPIN_RST_FUN			(0x3 << 3)
+
+#define RK817_RST_FUNC_MSK		(0x3 << 6)
+#define RK817_RST_FUNC_SFT		(6)
+#define RK817_RST_FUNC_CNT		(3)
+#define RK817_RST_FUNC_DEV		(0) /* reset the dev */
+#define RK817_RST_FUNC_REG		(0x1 << 6) /* reset the reg only */
+
+#define RK817_SLPPOL_MSK		BIT(5)
+#define RK817_SLPPOL_H			BIT(5)
+#define RK817_SLPPOL_L			(0)
+
+/* gpio&int 0xfe */
+#define RK817_INT_POL_MSK		BIT(1)
+#define RK817_INT_POL_H			BIT(1)
+#define RK817_INT_POL_L			0
+#define RK809_BUCK5_CONFIG(i)		(RK817_BOOST_OTG_CFG + (i) * 1)
 
 enum {
 	BUCK_ILMIN_50MA,
@@ -443,6 +616,8 @@ enum {
 enum {
 	RK805_ID = 0x8050,
 	RK808_ID = 0x0000,
+	RK809_ID = 0x8090,
+	RK817_ID = 0x8170,
 	RK818_ID = 0x8181,
 };
 

sound/soc/codecs/cros_ec_codec.c

@@ -38,21 +38,21 @@ static const DECLARE_TLV_DB_SCALE(ec_mic_gain_tlv, 0, 100, 0);
 
 static int ec_command_get_gain(struct snd_soc_component *component,
 			       struct ec_param_codec_i2s *param,
-			       struct ec_response_codec_gain *resp)
+			       struct ec_codec_i2s_gain *resp)
 {
 	struct cros_ec_codec_data *codec_data =
 		snd_soc_component_get_drvdata(component);
 	struct cros_ec_device *ec_device = codec_data->ec_device;
 	u8 buffer[sizeof(struct cros_ec_command) +
 		  max(sizeof(struct ec_param_codec_i2s),
-		      sizeof(struct ec_response_codec_gain))];
+		      sizeof(struct ec_codec_i2s_gain))];
 	struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
 	int ret;
 
 	msg->version = 0;
 	msg->command = EC_CMD_CODEC_I2S;
 	msg->outsize = sizeof(struct ec_param_codec_i2s);
-	msg->insize = sizeof(struct ec_response_codec_gain);
+	msg->insize = sizeof(struct ec_codec_i2s_gain);
 
 	memcpy(msg->data, param, msg->outsize);
 
@@ -226,7 +226,7 @@ static int get_ec_mic_gain(struct snd_soc_component *component,
 			   u8 *left, u8 *right)
 {
 	struct ec_param_codec_i2s param;
-	struct ec_response_codec_gain resp;
+	struct ec_codec_i2s_gain resp;
 	int ret;
 
 	param.cmd = EC_CODEC_GET_GAIN;