Commit 8e34d1aa authored by Alexander Duyck's avatar Alexander Duyck Committed by Jeff Kirsher

ixgbe: cleanup configuration of EITRSEL and VF reset path

This change is meant to cleanup some of the code related to SR-IOV and the
interrupt registers.  Specifically I am moving the EITRSEL configuration
into the MSI-X configuration section instead of enablement.  Also I am
fixing the VF shutdown path since it had operations in the incorrect order.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 8132b54e
......@@ -1516,6 +1516,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
/* Populate MSIX to EITR Select */
if (adapter->num_vfs > 32) {
u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
}
/*
* Populate the IVAR table and set the ITR values to the
* corresponding register.
......@@ -2130,11 +2136,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
ixgbe_irq_enable_queues(adapter, ~0);
if (flush)
IXGBE_WRITE_FLUSH(&adapter->hw);
if (adapter->num_vfs > 32) {
u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
}
}
/**
......@@ -2313,8 +2314,6 @@ static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
if (adapter->num_vfs > 32)
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
break;
default:
break;
......@@ -3863,17 +3862,19 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
del_timer_sync(&adapter->service_timer);
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
/* Clear EITR Select mapping */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
/* Mark all the VFs as inactive */
for (i = 0 ; i < adapter->num_vfs; i++)
adapter->vfinfo[i].clear_to_send = 0;
/* ping all the active vfs to let them know we are going down */
ixgbe_ping_all_vfs(adapter);
/* Disable all VFTE/VFRE TX/RX */
ixgbe_disable_tx_rx(adapter);
/* Mark all the VFs as inactive */
for (i = 0 ; i < adapter->num_vfs; i++)
adapter->vfinfo[i].clear_to_send = 0;
}
/* disable transmits in the hardware now that interrupts are off */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment