Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (51 commits)
  [ARM] 5308/1: Fix Viper ISA IRQ handling
  [ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build error
  [ARM] 5306/1: pxa: fix build error on CM-X270
  [ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict
  [ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary check
  [ARM] 5301/1: ARM: OMAP: Add missing irq defines
  ARM: OMAP3: Add default kernel config for OMAP LDP
  ARM: OMAP3: Add basic board support for OMAP LDP
  ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
  ARM: OMAP3: Add Beagle defconfig
  ARM: OMAP3: Add minimal Beagle board support
  ARM: OMAP3: Add minimal omap3430 support
  ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  ARM: OMAP: Fixes to omap_mcbsp_request function
  ARM: OMAP: Add support for OMAP2430 in McBSP
  ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xx
  ARM: OMAP: Allocate McBSP devices dynamically
  Fix sections for omap-mcbsp platform driver
  [ARM] S3C24XX: Additional include moves
  ...

arch/arm/Makefile

@@ -118,9 +118,10 @@ endif
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
+ machine-$(CONFIG_ARCH_OMAP3)	   := omap2
     plat-$(CONFIG_ARCH_OMAP)	   := omap
  machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
-    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx

arch/arm/mach-omap1/clock.c

@@ -201,7 +201,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	parent = clk->parent;
-	if (unlikely(parent == 0))
+	if (unlikely(parent == NULL))
 		return -EIO;
 
 	realrate = parent->rate;
@@ -499,7 +499,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	if (clk->flags & ALWAYS_ENABLED)
 		return 0;
 
-	if (unlikely(clk->enable_reg == 0)) {
+	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return -EINVAL;
@@ -535,7 +535,7 @@ static void omap1_clk_disable_generic(struct clk *clk)
 	__u16 regval16;
 	__u32 regval32;
 
-	if (clk->enable_reg == 0)
+	if (clk->enable_reg == NULL)
 		return;
 
 	if (clk->flags & ENABLE_REG_32BIT) {
@@ -577,7 +577,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 		return clk->parent->rate / (1 << dsor_exp);
 	}
 
-	if(clk->round_rate != 0)
+	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
 	return clk->rate;
@@ -625,7 +625,7 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
-	if ((u32)clk->enable_reg == DSP_IDLECT2) {
+	if (clk->enable_reg == DSP_IDLECT2) {
 		printk(KERN_INFO "Skipping reset check for DSP domain "
 		       "clock \"%s\"\n", clk->name);
 		return;

arch/arm/mach-omap1/clock.h

@@ -324,7 +324,7 @@ static struct clk dspper_ck = {
 	.parent		= &ck_dpll1,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc_dsp_domain,
@@ -338,7 +338,7 @@ static struct clk dspxor_ck = {
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_dsp_domain,
@@ -350,7 +350,7 @@ static struct clk dsptim_ck = {
 	.parent		= &ck_ref,
 	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
-	.enable_reg	= (void __iomem *)DSP_IDLECT2,
+	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
 	.recalc		= &followparent_recalc,
 	.enable		= &omap1_clk_enable_dsp_domain,

arch/arm/mach-omap1/devices.c

@@ -101,7 +101,7 @@ static inline void omap_init_mbox(void) { }
 
 #if defined(CONFIG_OMAP_STI)
 
-#define OMAP1_STI_BASE		IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE		0xfffea000
 #define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
 
 static struct resource sti_resources[] = {

arch/arm/mach-omap1/mcbsp.c

@@ -103,30 +103,6 @@ static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
 { }
 #endif
 
-static int omap1_mcbsp_check(unsigned int id)
-{
-	/* REVISIT: Check correctly for number of registered McBSPs */
-	if (cpu_is_omap730()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 2) {
-		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-		       return -ENODEV;
-		}
-		return 0;
-	}
-
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		if (id > OMAP_MAX_MCBSP_COUNT - 1) {
-			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n",
-				id + 1);
-			return -ENODEV;
-		}
-		return 0;
-	}
-
-	return -ENODEV;
-}
-
 static void omap1_mcbsp_request(unsigned int id)
 {
 	/*
@@ -151,7 +127,6 @@ static void omap1_mcbsp_free(unsigned int id)
 }
 
 static struct omap_mcbsp_ops omap1_mcbsp_ops = {
-	.check		= omap1_mcbsp_check,
 	.request	= omap1_mcbsp_request,
 	.free		= omap1_mcbsp_free,
 };
@@ -160,7 +135,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP730_MCBSP1_BASE,
-		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_730_McBSP1RX,
@@ -169,7 +143,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP730_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_730_McBSP2RX,
@@ -187,7 +160,6 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP1510_MCBSP1_BASE,
-		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_McBSP1RX,
@@ -197,7 +169,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		},
 	{
 		.phys_base	= OMAP1510_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
 		.rx_irq		= INT_1510_SPI_RX,
@@ -206,7 +177,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1510_MCBSP3_BASE,
-		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_McBSP3RX,
@@ -225,7 +195,6 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP1610_MCBSP1_BASE,
-		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
 		.rx_irq		= INT_McBSP1RX,
@@ -235,7 +204,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP2_BASE,
-		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
 		.rx_irq		= INT_1610_McBSP2_RX,
@@ -244,7 +212,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 	{
 		.phys_base	= OMAP1610_MCBSP3_BASE,
-		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
 		.rx_irq		= INT_McBSP3RX,
@@ -270,6 +237,18 @@ int __init omap1_mcbsp_init(void)
 		}
 	}
 
+	if (cpu_is_omap730())
+		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap15xx())
+		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap16xx())
+		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+
+	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
+								GFP_KERNEL);
+	if (!mcbsp_ptr)
+		return -ENOMEM;
+
 	if (cpu_is_omap730())
 		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
 						OMAP730_MCBSP_PDATA_SZ);

arch/arm/mach-omap1/serial.c

@@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART1_BASE),
-		.mapbase	= (unsigned long)OMAP_UART1_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART2_BASE),
-		.mapbase	= (unsigned long)OMAP_UART2_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= (char*)IO_ADDRESS(OMAP_UART3_BASE),
-		.mapbase	= (unsigned long)OMAP_UART3_BASE,
+		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,

arch/arm/mach-omap2/Kconfig

@@ -15,8 +15,17 @@ config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP24XX
 
+config ARCH_OMAP34XX
+	bool "OMAP34xx Based System"
+	depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+	bool "OMAP3430 support"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select ARCH_OMAP_OTG
+
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2 || ARCH_OMAP3
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
@@ -35,3 +44,14 @@ config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP3_BEAGLE
+	bool "OMAP3 BEAGLE board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_LDP
+	bool "OMAP3 LDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OVERO
+	bool "Gumstix Overo board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX

arch/arm/mach-omap2/Makefile

@@ -4,16 +4,21 @@
 
 # Common support
 obj-y := irq.o id.o io.o memory.o control.o prcm.o clock.o mux.o \
-		devices.o serial.o gpmc.o timer-gp.o
+		devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
+		clockdomain.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y					+= pm.o
+obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+endif
 
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
@@ -24,4 +29,7 @@ obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
 obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
+obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
+obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 

arch/arm/mach-omap2/board-ldp.c

+/*
+ * linux/arch/arm/mach-omap2/board-ldp.c
+ *
+ * Copyright (C) 2008 Texas Instruments Inc.
+ * Nishant Kamat <nskamat@ti.com>
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-ldp.h>
+#include <mach/mcspi.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <mach/control.h>
+
+static void __init omap_ldp_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_uart_config ldp_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel ldp_config[] __initdata = {
+	{ OMAP_TAG_UART,	&ldp_uart_config },
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, NULL, 0);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+static void __init omap_ldp_init(void)
+{
+	omap_i2c_init();
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap_serial_init();
+}
+
+static void __init omap_ldp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_LDP, "OMAP LDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_ldp_map_io,
+	.init_irq	= omap_ldp_init_irq,
+	.init_machine	= omap_ldp_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

+/*
+ * linux/arch/arm/mach-omap2/board-omap3beagle.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/nand.h>
+
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition omap3beagle_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data omap3beagle_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= omap3beagle_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3beagle_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.nand_setup	= NULL,
+	.dev_ready	= NULL,
+};
+
+static struct resource omap3beagle_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device omap3beagle_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &omap3beagle_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &omap3beagle_nand_resource,
+};
+
+static struct omap_uart_config omap3_beagle_uart_config __initdata = {
+	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static void __init omap3_beagle_init_irq(void)
+{
+	omap2_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct platform_device omap3_beagle_lcd_device = {
+	.name		= "omap3beagle_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "beagleboard::usr0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 150,
+	},
+	{
+		.name			= "beagleboard::usr1",
+		.default_trigger	= "mmc0",
+		.gpio			= 149,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 7,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
+	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
+};
+
+static struct platform_device *omap3_beagle_devices[] __initdata = {
+	&omap3_beagle_lcd_device,
+	&leds_gpio,
+	&keys_gpio,
+};
+
+static void __init omap3beagle_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		omap3beagle_nand_data.cs = nandcs;
+		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&omap3beagle_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static void __init omap3_beagle_init(void)
+{
+	platform_add_devices(omap3_beagle_devices,
+			ARRAY_SIZE(omap3_beagle_devices));
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap_serial_init();
+	omap3beagle_flash_init();
+}
+
+static void __init omap3_beagle_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
+	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_beagle_map_io,
+	.init_irq	= omap3_beagle_init_irq,
+	.init_machine	= omap3_beagle_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/clock.h

@@ -21,6 +21,7 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
 long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
@@ -36,6 +37,7 @@ void omap2_clk_disable_unused(struct clk *clk);
 #endif
 
 void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clk_clkdm(struct clk *clk);
 void omap2_init_clksel_parent(struct clk *clk);
 u32 omap2_clksel_get_divisor(struct clk *clk);
 u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,

arch/arm/mach-omap2/clock34xx.c

@@ -62,11 +62,14 @@ static void omap3_dpll_recalc(struct clk *clk)
 static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->enable_mask, clken_bits << __ffs(dd->enable_mask),
-			dd->control_reg);
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
 }
 
 /* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
@@ -82,7 +85,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
 	state <<= dd->idlest_bit;
 	idlest_mask = 1 << dd->idlest_bit;
 
-	while (((cm_read_reg(dd->idlest_reg) & idlest_mask) != state) &&
+	while (((__raw_readl(dd->idlest_reg) & idlest_mask) != state) &&
 	       i < MAX_DPLL_WAIT_TRIES) {
 		i++;
 		udelay(1);
@@ -285,7 +288,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 
 	dd = clk->dpll_data;
 
-	v = cm_read_reg(dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
 
@@ -304,6 +307,7 @@ static u32 omap3_dpll_autoidle_read(struct clk *clk)
 static void omap3_dpll_allow_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
@@ -315,9 +319,10 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
 	 * optionally enter this mode.
 	 */
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /**
@@ -329,15 +334,17 @@ static void omap3_dpll_allow_idle(struct clk *clk)
 static void omap3_dpll_deny_idle(struct clk *clk)
 {
 	const struct dpll_data *dd;
+	u32 v;
 
 	if (!clk || !clk->dpll_data)
 		return;
 
 	dd = clk->dpll_data;
 
-	cm_rmw_reg_bits(dd->autoidle_mask,
-			DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask),
-			dd->autoidle_reg);
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
 }
 
 /* Clock control for DPLL outputs */
@@ -482,8 +489,10 @@ int __init omap2_clk_init(void)
 	for (clkp = onchip_34xx_clks;
 	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
 	     clkp++) {
-		if ((*clkp)->flags & cpu_clkflg)
+		if ((*clkp)->flags & cpu_clkflg) {
 			clk_register(*clkp);
+			omap2_init_clk_clkdm(*clkp);
+		}
 	}
 
 	/* REVISIT: Not yet ready for OMAP3 */

arch/arm/mach-omap2/cm.h

@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_CM_REGADDR(module, reg)					\
-	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+			IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
 #else
 #define OMAP2420_CM_REGADDR(module, reg)				\
 			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))

arch/arm/mach-omap2/memory.c

@@ -101,6 +101,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force)
 	return prev;
 }
 
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type)
+{
+}
+#endif
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
@@ -165,6 +176,9 @@ void __init omap2_init_memory(void)
 {
 	u32 l;
 
+	if (!cpu_is_omap2420())
+		return;
+
 	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);