net/mlx4: Add set VF mac address support

Add ndo_set_vf_mac support which allows to set the MAC address
for mlx4 VF Ethernet NICs from the host.
Signed-off-by: Rony Efraim <ronye@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/cmd.c

@@ -2016,3 +2016,34 @@ u32 mlx4_comm_get_version(void)
 {
 	 return ((u32) CMD_CHAN_IF_REV << 8) | (u32) CMD_CHAN_VER;
 }
+
+static int mlx4_get_slave_indx(struct mlx4_dev *dev, int vf)
+{
+	if ((vf < 0) || (vf >= dev->num_vfs)) {
+		mlx4_err(dev, "Bad vf number:%d (number of activated vf: %d)\n", vf, dev->num_vfs);
+		return -EINVAL;
+	}
+
+	return vf+1;
+}
+
+int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac)
+{
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	struct mlx4_vport_state *s_info;
+	int slave;
+
+	if (!mlx4_is_master(dev))
+		return -EPROTONOSUPPORT;
+
+	slave = mlx4_get_slave_indx(dev, vf);
+	if (slave < 0)
+		return -EINVAL;
+
+	s_info = &priv->mfunc.master.vf_admin[slave].vport[port];
+	s_info->mac = mac;
+	mlx4_info(dev, "default mac on vf %d port %d to %llX will take afect only after vf restart\n",
+		  vf, port, s_info->mac);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mlx4_set_vf_mac);

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -2024,6 +2024,19 @@ static int mlx4_en_set_features(struct net_device *netdev,
 
 }
 
+static int mlx4_en_set_vf_mac(struct net_device *dev, int queue, u8 *mac)
+{
+	struct mlx4_en_priv *en_priv = netdev_priv(dev);
+	struct mlx4_en_dev *mdev = en_priv->mdev;
+	u64 mac_u64 = mlx4_en_mac_to_u64(mac);
+
+	if (!is_valid_ether_addr(mac))
+		return -EINVAL;
+
+	return mlx4_set_vf_mac(mdev->dev, en_priv->port, queue, mac_u64);
+}
+
+
 static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_open		= mlx4_en_open,
 	.ndo_stop		= mlx4_en_close,
@@ -2048,6 +2061,30 @@ static const struct net_device_ops mlx4_netdev_ops = {
 #endif
 };
 
+static const struct net_device_ops mlx4_netdev_ops_master = {
+	.ndo_open		= mlx4_en_open,
+	.ndo_stop		= mlx4_en_close,
+	.ndo_start_xmit		= mlx4_en_xmit,
+	.ndo_select_queue	= mlx4_en_select_queue,
+	.ndo_get_stats		= mlx4_en_get_stats,
+	.ndo_set_rx_mode	= mlx4_en_set_rx_mode,
+	.ndo_set_mac_address	= mlx4_en_set_mac,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= mlx4_en_change_mtu,
+	.ndo_tx_timeout		= mlx4_en_tx_timeout,
+	.ndo_vlan_rx_add_vid	= mlx4_en_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= mlx4_en_vlan_rx_kill_vid,
+	.ndo_set_vf_mac		= mlx4_en_set_vf_mac,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= mlx4_en_netpoll,
+#endif
+	.ndo_set_features	= mlx4_en_set_features,
+	.ndo_setup_tc		= mlx4_en_setup_tc,
+#ifdef CONFIG_RFS_ACCEL
+	.ndo_rx_flow_steer	= mlx4_en_filter_rfs,
+#endif
+};
+
 int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 			struct mlx4_en_port_profile *prof)
 {
@@ -2164,7 +2201,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	/*
 	 * Initialize netdev entry points
 	 */
-	dev->netdev_ops = &mlx4_netdev_ops;
+	if (mlx4_is_master(priv->mdev->dev))
+		dev->netdev_ops = &mlx4_netdev_ops_master;
+	else
+		dev->netdev_ops = &mlx4_netdev_ops;
 	dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT;
 	netif_set_real_num_tx_queues(dev, priv->tx_ring_num);
 	netif_set_real_num_rx_queues(dev, priv->rx_ring_num);

include/linux/mlx4/cmd.h

@@ -232,6 +232,7 @@ struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
 void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
 
 u32 mlx4_comm_get_version(void);
+int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac);
 
 #define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)