Commit 8fd7a775 authored by Michal Simek's avatar Michal Simek

ARM64: zynqmp: Move uart and ttcs to the right location

Sort nodes in DTSI.
Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 0fcb064f
...@@ -126,66 +126,6 @@ misc_clk: misc_clk { ...@@ -126,66 +126,6 @@ misc_clk: misc_clk {
clock-frequency = <25000000>; clock-frequency = <25000000>;
}; };
ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
uart0: serial@ff000000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
uart1: serial@ff010000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
gpio: gpio@ff0a0000 { gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0"; compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled"; status = "disabled";
...@@ -343,6 +283,66 @@ smmu: smmu@fd800000 { ...@@ -343,6 +283,66 @@ smmu: smmu@fd800000 {
<0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
}; };
ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
uart0: serial@ff000000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
uart1: serial@ff010000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
usb0: usb@fe200000 { usb0: usb@fe200000 {
compatible = "snps,dwc3"; compatible = "snps,dwc3";
status = "disabled"; status = "disabled";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment