i2c: drivers: Use generic definitions for bus frequencies

Since we have generic definitions for bus frequencies, let's use them.
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Robert Richter <rrichter@marvell.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Elie Morisse <syniurge@gmail.com>
Acked-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-altera.c

@@ -147,7 +147,7 @@ static void altr_i2c_init(struct altr_i2c_dev *idev)
 		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
 	u32 t_high, t_low;
 
-	if (idev->bus_clk_rate <= 100000) {
+	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
 		tmp &= ~ALTR_I2C_CTRL_BSPEED;
 		/* Standard mode SCL 50/50 */
 		t_high = divisor * 1 / 2;
@@ -423,10 +423,10 @@ static int altr_i2c_probe(struct platform_device *pdev)
 				       &idev->bus_clk_rate);
 	if (val) {
 		dev_err(&pdev->dev, "Default to 100kHz\n");
-		idev->bus_clk_rate = 100000;	/* default clock rate */
+		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 	}
 
-	if (idev->bus_clk_rate > 400000) {
+	if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(&pdev->dev, "invalid clock-frequency %d\n",
 			idev->bus_clk_rate);
 		return -EINVAL;

drivers/i2c/busses/i2c-amd-mp2-plat.c

@@ -201,32 +201,37 @@ static int i2c_amd_resume(struct amd_i2c_common *i2c_common)
 }
 #endif
 
+static const u32 supported_speeds[] = {
+	I2C_MAX_HIGH_SPEED_MODE_FREQ,
+	I2C_MAX_TURBO_MODE_FREQ,
+	I2C_MAX_FAST_MODE_PLUS_FREQ,
+	I2C_MAX_FAST_MODE_FREQ,
+	I2C_MAX_STANDARD_MODE_FREQ,
+};
+
 static enum speed_enum i2c_amd_get_bus_speed(struct platform_device *pdev)
 {
 	u32 acpi_speed;
 	int i;
-	static const u32 supported_speeds[] = {
-		0, 100000, 400000, 1000000, 1400000, 3400000
-	};
 
 	acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
 	/* round down to the lowest standard speed */
-	for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (acpi_speed < supported_speeds[i])
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed >= supported_speeds[i])
 			break;
 	}
-	acpi_speed = supported_speeds[i - 1];
+	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
 
 	switch (acpi_speed) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		return speed100k;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 		return speed400k;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		return speed1000k;
-	case 1400000:
+	case I2C_MAX_TURBO_MODE_FREQ:
 		return speed1400k;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		return speed3400k;
 	default:
 		return speed400k;

drivers/i2c/busses/i2c-aspeed.c

@@ -997,7 +997,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Could not read bus-frequency property\n");
-		bus->bus_frequency = 100000;
+		bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);

drivers/i2c/busses/i2c-axxia.c

@@ -199,7 +199,7 @@ static int axxia_i2c_init(struct axxia_i2c_dev *idev)
 	/* Enable Master Mode */
 	writel(0x1, idev->base + GLOBAL_CONTROL);
 
-	if (idev->bus_clk_rate <= 100000) {
+	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
 		/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
 		t_high = divisor * 1 / 2;
 		t_low = divisor * 1 / 2;
@@ -765,7 +765,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
 
 	of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
 	if (idev->bus_clk_rate == 0)
-		idev->bus_clk_rate = 100000;	/* default clock rate */
+		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 
 	ret = clk_prepare_enable(idev->i2c_clk);
 	if (ret) {

drivers/i2c/busses/i2c-bcm-iproc.c

@@ -858,25 +858,25 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
 	if (ret < 0) {
 		dev_info(iproc_i2c->device,
 			"unable to interpret clock-frequency DT property\n");
-		bus_speed = 100000;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
-	if (bus_speed < 100000) {
+	if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) {
 		dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
 			bus_speed);
 		dev_err(iproc_i2c->device,
 			"valid speeds are 100khz and 400khz\n");
 		return -EINVAL;
-	} else if (bus_speed < 400000) {
-		bus_speed = 100000;
+	} else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) {
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
-		bus_speed = 400000;
+		bus_speed = I2C_MAX_FAST_MODE_FREQ;
 	}
 
 	iproc_i2c->bus_speed = bus_speed;
 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
-	val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
 
 	dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
@@ -1029,7 +1029,7 @@ static int bcm_iproc_i2c_resume(struct device *dev)
 	/* configure to the desired bus speed */
 	val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
 	val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
-	val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT;
+	val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
 	iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
 
 	bcm_iproc_i2c_enable_disable(iproc_i2c, true);

drivers/i2c/busses/i2c-bcm-kona.c

@@ -722,16 +722,16 @@ static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
 	}
 
 	switch (bus_speed) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
 		break;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
 		break;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		/* Send mastercode at 100k */
 		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
 		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];

drivers/i2c/busses/i2c-bcm2835.c

@@ -439,7 +439,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_warn(&pdev->dev,
 			 "Could not read clock-frequency property\n");
-		bus_clk_rate = 100000;
+		bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate);

drivers/i2c/busses/i2c-cadence.c

@@ -104,9 +104,6 @@
 
 #define DRIVER_NAME		"cdns-i2c"
 
-#define CDNS_I2C_SPEED_MAX	400000
-#define CDNS_I2C_SPEED_DEFAULT	100000
-
 #define CDNS_I2C_DIVA_MAX	4
 #define CDNS_I2C_DIVB_MAX	64
 
@@ -949,8 +946,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
 
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 			&id->i2c_clk);
-	if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
-		id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+	if (ret || (id->i2c_clk > I2C_MAX_FAST_MODE_FREQ))
+		id->i2c_clk = I2C_MAX_STANDARD_MODE_FREQ;
 
 	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
 			  CDNS_I2C_CR_OFFSET);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -99,16 +99,16 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
 
 	switch (t->bus_freq_hz) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->sda_hold_time = ss_ht;
 		break;
-	case 1000000:
+	case I2C_MAX_FAST_MODE_PLUS_FREQ:
 		dev->sda_hold_time = fp_ht;
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		dev->sda_hold_time = hs_ht;
 		break;
-	case 400000:
+	case I2C_MAX_FAST_MODE_FREQ:
 	default:
 		dev->sda_hold_time = fs_ht;
 		break;
@@ -198,10 +198,10 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 	dev->mode = DW_IC_MASTER;
 
 	switch (t->bus_freq_hz) {
-	case 100000:
+	case I2C_MAX_STANDARD_MODE_FREQ:
 		dev->master_cfg |= DW_IC_CON_SPEED_STD;
 		break;
-	case 3400000:
+	case I2C_MAX_HIGH_SPEED_MODE_FREQ:
 		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
 		break;
 	default:
@@ -227,6 +227,13 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 		pm_runtime_put_noidle(dev->dev);
 }
 
+static const u32 supported_speeds[] = {
+	I2C_MAX_HIGH_SPEED_MODE_FREQ,
+	I2C_MAX_FAST_MODE_PLUS_FREQ,
+	I2C_MAX_FAST_MODE_FREQ,
+	I2C_MAX_STANDARD_MODE_FREQ,
+};
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
@@ -236,9 +243,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	u32 acpi_speed;
 	struct resource *mem;
 	int i, irq, ret;
-	static const int supported_speeds[] = {
-		0, 100000, 400000, 1000000, 3400000
-	};
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -274,11 +278,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Some DSTDs use a non standard speed, round down to the lowest
 	 * standard speed.
 	 */
-	for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
-		if (acpi_speed < supported_speeds[i])
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (acpi_speed >= supported_speeds[i])
 			break;
 	}
-	acpi_speed = supported_speeds[i - 1];
+	acpi_speed = i < ARRAY_SIZE(supported_speeds) ? supported_speeds[i] : 0;
 
 	/*
 	 * Find bus speed from the "clock-frequency" device property, ACPI
@@ -289,7 +293,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	else if (acpi_speed || t->bus_freq_hz)
 		t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
 	else
-		t->bus_freq_hz = 400000;
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 
 	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
 
@@ -303,8 +307,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	 * Only standard mode at 100kHz, fast mode at 400kHz,
 	 * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
 	 */
-	if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
-	    t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
+	for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) {
+		if (t->bus_freq_hz == supported_speeds[i])
+			break;
+	}
+	if (i == ARRAY_SIZE(supported_speeds)) {
 		dev_err(&pdev->dev,
 			"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
 			t->bus_freq_hz);

drivers/i2c/busses/i2c-digicolor.c

@@ -18,7 +18,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-#define DEFAULT_FREQ		100000
 #define TIMEOUT_MS		100
 
 #define II_CONTROL		0x0
@@ -300,7 +299,7 @@ static int dc_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &i2c->frequency))
-		i2c->frequency = DEFAULT_FREQ;
+		i2c->frequency = I2C_MAX_STANDARD_MODE_FREQ;
 
 	i2c->dev = &pdev->dev;
 	platform_set_drvdata(pdev, i2c);

drivers/i2c/busses/i2c-diolan-u2c.c

@@ -64,8 +64,6 @@
 #define U2C_I2C_SPEED_2KHZ	242	/* 2 kHz, minimum speed */
 #define U2C_I2C_SPEED(f)	((DIV_ROUND_UP(1000000, (f)) - 10) / 2 + 1)
 
-#define U2C_I2C_FREQ_FAST	400000
-#define U2C_I2C_FREQ_STD	100000
 #define U2C_I2C_FREQ(s)		(1000000 / (2 * (s - 1) + 10))
 
 #define DIOLAN_USB_TIMEOUT	100	/* in ms */
@@ -87,7 +85,7 @@ struct i2c_diolan_u2c {
 	int ocount;			/* Number of enqueued messages */
 };
 
-static uint frequency = U2C_I2C_FREQ_STD;	/* I2C clock frequency in Hz */
+static uint frequency = I2C_MAX_STANDARD_MODE_FREQ;	/* I2C clock frequency in Hz */
 
 module_param(frequency, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz");
@@ -299,12 +297,12 @@ static int diolan_init(struct i2c_diolan_u2c *dev)
 {
 	int speed, ret;
 
-	if (frequency >= 200000) {
+	if (frequency >= 2 * I2C_MAX_STANDARD_MODE_FREQ) {
 		speed = U2C_I2C_SPEED_FAST;
-		frequency = U2C_I2C_FREQ_FAST;
-	} else if (frequency >= 100000 || frequency == 0) {
+		frequency = I2C_MAX_FAST_MODE_FREQ;
+	} else if (frequency >= I2C_MAX_STANDARD_MODE_FREQ || frequency == 0) {
 		speed = U2C_I2C_SPEED_STD;
-		frequency = U2C_I2C_FREQ_STD;
+		frequency = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
 		speed = U2C_I2C_SPEED(frequency);
 		if (speed > U2C_I2C_SPEED_2KHZ)

drivers/i2c/busses/i2c-efm32.c

@@ -388,7 +388,7 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 	if (!ret) {
 		dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
 	} else {
-		frequency = 100000;
+		frequency = I2C_MAX_STANDARD_MODE_FREQ;
 		dev_info(&pdev->dev, "defaulting to 100 kHz\n");
 	}
 	ddata->frequency = frequency;

drivers/i2c/busses/i2c-exynos5.c

@@ -164,13 +164,6 @@
 #define HSI2C_MASTER_ID(x)			((x & 0xff) << 24)
 #define MASTER_ID(x)				((x & 0x7) + 0x08)
 
-/*
- * Controller operating frequency, timing values for operation
- * are calculated against this frequency
- */
-#define HSI2C_HS_TX_CLOCK	1000000
-#define HSI2C_FS_TX_CLOCK	100000
-
 #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100))
 
 enum i2c_type_exynos {
@@ -264,6 +257,9 @@ static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
  * exynos5_i2c_set_timing: updates the registers with appropriate
  * timing values calculated
  *
+ * Timing values for operation are calculated against either 100kHz
+ * or 1MHz controller operating frequency.
+ *
  * Returns 0 on success, -EINVAL if the cycle length cannot
  * be calculated.
  */
@@ -281,7 +277,7 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
 	unsigned int t_ftl_cycle;
 	unsigned int clkin = clk_get_rate(i2c->clk);
 	unsigned int op_clk = hs_timings ? i2c->op_clock :
-		(i2c->op_clock >= HSI2C_HS_TX_CLOCK) ? HSI2C_FS_TX_CLOCK :
+		(i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) ? I2C_MAX_STANDARD_MODE_FREQ :
 		i2c->op_clock;
 	int div, clk_cycle, temp;
 
@@ -353,7 +349,7 @@ static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
 	/* always set Fast Speed timings */
 	int ret = exynos5_i2c_set_timing(i2c, false);
 
-	if (ret < 0 || i2c->op_clock < HSI2C_HS_TX_CLOCK)
+	if (ret < 0 || i2c->op_clock < I2C_MAX_FAST_MODE_PLUS_FREQ)
 		return ret;
 
 	return exynos5_i2c_set_timing(i2c, true);
@@ -376,7 +372,7 @@ static void exynos5_i2c_init(struct exynos5_i2c *i2c)
 					i2c->regs + HSI2C_CTL);
 	writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
 
-	if (i2c->op_clock >= HSI2C_HS_TX_CLOCK) {
+	if (i2c->op_clock >= I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
 					i2c->regs + HSI2C_ADDR);
 		i2c_conf |= HSI2C_HS_MODE;
@@ -748,7 +744,7 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	if (of_property_read_u32(np, "clock-frequency", &i2c->op_clock))
-		i2c->op_clock = HSI2C_FS_TX_CLOCK;
+		i2c->op_clock = I2C_MAX_STANDARD_MODE_FREQ;
 
 	strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
 	i2c->adap.owner   = THIS_MODULE;

drivers/i2c/busses/i2c-hix5hd2.c

@@ -68,8 +68,6 @@
 #define I2C_ARBITRATE_INTR	BIT(1)
 #define I2C_OVER_INTR		BIT(0)
 
-#define HIX5I2C_MAX_FREQ	400000		/* 400k */
-
 enum hix5hd2_i2c_state {
 	HIX5I2C_STAT_RW_ERR = -1,
 	HIX5I2C_STAT_INIT,
@@ -400,12 +398,12 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(np, "clock-frequency", &freq)) {
 		/* use 100k as default value */
-		priv->freq = 100000;
+		priv->freq = I2C_MAX_STANDARD_MODE_FREQ;
 	} else {
-		if (freq > HIX5I2C_MAX_FREQ) {
-			priv->freq = HIX5I2C_MAX_FREQ;
+		if (freq > I2C_MAX_FAST_MODE_FREQ) {
+			priv->freq = I2C_MAX_FAST_MODE_FREQ;
 			dev_warn(priv->dev, "use max freq %d instead\n",
-				 HIX5I2C_MAX_FREQ);
+				 I2C_MAX_FAST_MODE_FREQ);
 		} else {
 			priv->freq = freq;
 		}

drivers/i2c/busses/i2c-img-scb.c

@@ -304,7 +304,7 @@ static struct img_i2c_timings timings[] = {
 	/* Standard mode */
 	{
 		.name = "standard",
-		.max_bitrate = 100000,
+		.max_bitrate = I2C_MAX_STANDARD_MODE_FREQ,
 		.tckh = 4000,
 		.tckl = 4700,
 		.tsdh = 4700,
@@ -316,7 +316,7 @@ static struct img_i2c_timings timings[] = {
 	/* Fast mode */
 	{
 		.name = "fast",
-		.max_bitrate = 400000,
+		.max_bitrate = I2C_MAX_FAST_MODE_FREQ,
 		.tckh = 600,
 		.tckl = 1300,
 		.tsdh = 600,

drivers/i2c/busses/i2c-imx-lpi2c.c

@@ -75,12 +75,6 @@
 #define I2C_CLK_RATIO	2
 #define CHUNK_DATA	256
 
-#define LPI2C_DEFAULT_RATE	100000
-#define STARDARD_MAX_BITRATE	400000
-#define FAST_MAX_BITRATE	1000000
-#define FAST_PLUS_MAX_BITRATE	3400000
-#define HIGHSPEED_MAX_BITRATE	5000000
-
 #define I2C_PM_TIMEOUT		10 /* ms */
 
 enum lpi2c_imx_mode {
@@ -152,13 +146,13 @@ static void lpi2c_imx_set_mode(struct lpi2c_imx_struct *lpi2c_imx)
 	unsigned int bitrate = lpi2c_imx->bitrate;
 	enum lpi2c_imx_mode mode;
 
-	if (bitrate < STARDARD_MAX_BITRATE)
+	if (bitrate < I2C_MAX_FAST_MODE_FREQ)
 		mode = STANDARD;
-	else if (bitrate < FAST_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_FAST_MODE_PLUS_FREQ)
 		mode = FAST;
-	else if (bitrate < FAST_PLUS_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_HIGH_SPEED_MODE_FREQ)
 		mode = FAST_PLUS;
-	else if (bitrate < HIGHSPEED_MAX_BITRATE)
+	else if (bitrate < I2C_MAX_ULTRA_FAST_MODE_FREQ)
 		mode = HS;
 	else
 		mode = ULTRA_FAST;
@@ -578,7 +572,7 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "clock-frequency", &lpi2c_imx->bitrate);
 	if (ret)
-		lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE;
+		lpi2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
 			       pdev->name, lpi2c_imx);

drivers/i2c/busses/i2c-imx.c

@@ -50,9 +50,6 @@
 /* This will be the driver name the kernel reports */
 #define DRIVER_NAME "imx-i2c"
 
-/* Default value */
-#define IMX_I2C_BIT_RATE	100000	/* 100kHz */
-
 /*
  * Enable DMA if transfer byte size is bigger than this threshold.
  * As the hardware request, it must bigger than 4 bytes.\
@@ -1201,7 +1198,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		goto rpm_disable;
 
 	/* Set up clock divider */
-	i2c_imx->bitrate = IMX_I2C_BIT_RATE;
+	i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "clock-frequency", &i2c_imx->bitrate);
 	if (ret < 0 && pdata && pdata->bitrate)

drivers/i2c/busses/i2c-lpc2k.c

@@ -396,7 +396,7 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				   &bus_clk_rate);
 	if (ret)
-		bus_clk_rate = 100000; /* 100 kHz default clock rate */
+		bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	clkrate = clk_get_rate(i2c->clk);
 	if (clkrate == 0) {
@@ -407,9 +407,9 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 
 	/* Setup I2C dividers to generate clock with proper duty cycle */
 	clkrate = clkrate / bus_clk_rate;
-	if (bus_clk_rate <= 100000)
+	if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
 		scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
-	else if (bus_clk_rate <= 400000)
+	else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
 		scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
 	else
 		scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;

drivers/i2c/busses/i2c-mt65xx.c

@@ -56,9 +56,6 @@
 #define I2C_DMA_4G_MODE			0x0001
 
 #define I2C_DEFAULT_CLK_DIV		5
-#define I2C_DEFAULT_SPEED		100000	/* hz */
-#define MAX_FS_MODE_SPEED		400000
-#define MAX_HS_MODE_SPEED		3400000
 #define MAX_SAMPLE_CNT_DIV		8
 #define MAX_STEP_CNT_DIV		64
 #define MAX_HS_STEP_CNT_DIV		8
@@ -450,10 +447,10 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
 	unsigned int best_mul;
 	unsigned int cnt_mul;
 
-	if (target_speed > MAX_HS_MODE_SPEED)
-		target_speed = MAX_HS_MODE_SPEED;
+	if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
+		target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
 
-	if (target_speed > MAX_FS_MODE_SPEED)
+	if (target_speed > I2C_MAX_FAST_MODE_FREQ)
 		max_step_cnt = MAX_HS_STEP_CNT_DIV;
 	else
 		max_step_cnt = MAX_STEP_CNT_DIV;
@@ -514,9 +511,9 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
 	clk_src = parent_clk / i2c->clk_src_div;
 	target_speed = i2c->speed_hz;
 
-	if (target_speed > MAX_FS_MODE_SPEED) {
+	if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
 		/* Set master code speed register */
-		ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
+		ret = mtk_i2c_calculate_speed(i2c, clk_src, I2C_MAX_FAST_MODE_FREQ,
 					      &l_step_cnt, &l_sample_cnt);
 		if (ret < 0)
 			return ret;
@@ -581,7 +578,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
+	if ((i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -590,7 +587,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
 
 	/* set start condition */
-	if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
+	if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
 		mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
 	else
 		mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
@@ -798,7 +795,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
-	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
+	if (i2c->auto_restart && num >= 2 && i2c->speed_hz > I2C_MAX_FAST_MODE_FREQ)
 		/* ignore the first restart irq after the master code,
 		 * otherwise the first transfer will be discarded.
 		 */
@@ -893,7 +890,7 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
 
 	ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
 	if (ret < 0)
-		i2c->speed_hz = I2C_DEFAULT_SPEED;
+		i2c->speed_hz = I2C_MAX_STANDARD_MODE_FREQ;
 
 	ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
 	if (ret < 0)

drivers/i2c/busses/i2c-mt7621.c

@@ -300,7 +300,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &i2c->bus_freq))
-		i2c->bus_freq = 100000;
+		i2c->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	if (i2c->bus_freq == 0) {
 		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");

drivers/i2c/busses/i2c-mv64xxx.c

@@ -810,7 +810,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	tclk = clk_get_rate(drv_data->clk);
 
 	if (of_property_read_u32(np, "clock-frequency", &bus_freq))
-		bus_freq = 100000; /* 100kHz by default */
+		bus_freq = I2C_MAX_STANDARD_MODE_FREQ; /* 100kHz by default */
 
 	if (of_device_is_compatible(np, "allwinner,sun4i-a10-i2c") ||
 	    of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
@@ -846,14 +846,14 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
 		drv_data->offload_enabled = true;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 
 	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
 		drv_data->offload_enabled = false;
 		/* The delay is only needed in standard mode (100kHz) */
-		if (bus_freq <= 100000)
+		if (bus_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 			drv_data->errata_delay = true;
 	}
 

drivers/i2c/busses/i2c-mxs.c

@@ -731,7 +731,7 @@ static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
 	 * This is compensated for by subtracting the respective constants
 	 * from the values written to the timing registers.
 	 */
-	if (speed > 100000) {
+	if (speed > I2C_MAX_STANDARD_MODE_FREQ) {
 		/* fast mode */
 		low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
 		high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
@@ -769,7 +769,7 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
 	ret = of_property_read_u32(node, "clock-frequency", &speed);
 	if (ret) {
 		dev_warn(dev, "No I2C speed selected, using 100kHz\n");
-		speed = 100000;
+		speed = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 
 	mxs_i2c_derive_timing(i2c, speed);

drivers/i2c/busses/i2c-nomadik.c

@@ -396,7 +396,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * 2 whereas it is 3 for fast and fastplus mode of
 	 * operation. TODO - high speed support.
 	 */
-	div = (dev->clk_freq > 100000) ? 3 : 2;
+	div = (dev->clk_freq > I2C_MAX_STANDARD_MODE_FREQ) ? 3 : 2;
 
 	/*
 	 * generate the mask for baud rate counters. The controller
@@ -420,7 +420,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	if (dev->sm > I2C_FREQ_MODE_FAST) {
 		dev_err(&dev->adev->dev,
 			"do not support this mode defaulting to std. mode\n");
-		brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+		brcr2 = i2c_clk / (I2C_MAX_STANDARD_MODE_FREQ * 2) & 0xffff;
 		writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
 		writel(I2C_FREQ_MODE_STANDARD << 4,
 				dev->virtbase + I2C_CR);
@@ -949,10 +949,10 @@ static void nmk_i2c_of_probe(struct device_node *np,
 {
 	/* Default to 100 kHz if no frequency is given in the node */
 	if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
-		nmk->clk_freq = 100000;
+		nmk->clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/* This driver only supports 'standard' and 'fast' modes of operation. */
-	if (nmk->clk_freq <= 100000)
+	if (nmk->clk_freq <= I2C_MAX_STANDARD_MODE_FREQ)
 		nmk->sm = I2C_FREQ_MODE_STANDARD;
 	else
 		nmk->sm = I2C_FREQ_MODE_FAST;

drivers/i2c/busses/i2c-omap.c

@@ -1380,7 +1380,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
 	if (match) {
-		u32 freq = 100000; /* default to 100000 Hz */
+		u32 freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 		pdata = match->data;
 		omap->flags = pdata->flags;

drivers/i2c/busses/i2c-owl.c

@@ -87,9 +87,6 @@
 
 #define OWL_I2C_MAX_RETRIES	50
 
-#define OWL_I2C_DEF_SPEED_HZ	100000
-#define OWL_I2C_MAX_SPEED_HZ	400000
-
 struct owl_i2c_dev {
 	struct i2c_adapter	adap;
 	struct i2c_msg		*msg;
@@ -419,11 +416,11 @@ static int owl_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency",
 				 &i2c_dev->bus_freq))
-		i2c_dev->bus_freq = OWL_I2C_DEF_SPEED_HZ;
+		i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/* We support only frequencies of 100k and 400k for now */
-	if (i2c_dev->bus_freq != OWL_I2C_DEF_SPEED_HZ &&
-	    i2c_dev->bus_freq != OWL_I2C_MAX_SPEED_HZ) {
+	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
 		return -EINVAL;
 	}

drivers/i2c/busses/i2c-qup.c

@@ -136,13 +136,8 @@
  */
 #define TOUT_MIN			2
 
-/* I2C Frequency Modes */
-#define I2C_STANDARD_FREQ		100000
-#define I2C_FAST_MODE_FREQ		400000
-#define I2C_FAST_MODE_PLUS_FREQ		1000000
-
 /* Default values. Use these if FW query fails */
-#define DEFAULT_CLK_FREQ I2C_STANDARD_FREQ
+#define DEFAULT_CLK_FREQ I2C_MAX_STANDARD_MODE_FREQ
 #define DEFAULT_SRC_CLK 20000000
 
 /*
@@ -1756,7 +1751,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 
 nodma:
 	/* We support frequencies up to FAST Mode Plus (1MHz) */
-	if (!clk_freq || clk_freq > I2C_FAST_MODE_PLUS_FREQ) {
+	if (!clk_freq || clk_freq > I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		dev_err(qup->dev, "clock frequency not supported %d\n",
 			clk_freq);
 		return -EINVAL;
@@ -1861,7 +1856,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
 
 	hs_div = 3;
-	if (clk_freq <= I2C_STANDARD_FREQ) {
+	if (clk_freq <= I2C_MAX_STANDARD_MODE_FREQ) {
 		fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
 		qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
 	} else {

drivers/i2c/busses/i2c-riic.c

@@ -287,10 +287,10 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
 
 	pm_runtime_get_sync(riic->adapter.dev.parent);
 
-	if (t->bus_freq_hz > 400000) {
+	if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(&riic->adapter.dev,
-			"unsupported bus speed (%dHz). 400000 max\n",
-			t->bus_freq_hz);
+			"unsupported bus speed (%dHz). %d max\n",
+			t->bus_freq_hz, I2C_MAX_FAST_MODE_FREQ);
 		ret = -EINVAL;
 		goto out;
 	}

drivers/i2c/busses/i2c-rk3x.c

@@ -539,9 +539,9 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
  */
 static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
 {
-	if (speed <= 100000)
+	if (speed <= I2C_MAX_STANDARD_MODE_FREQ)
 		return &standard_mode_spec;
-	else if (speed <= 400000)
+	else if (speed <= I2C_MAX_FAST_MODE_FREQ)
 		return &fast_mode_spec;
 	else
 		return &fast_mode_plus_spec;
@@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Only support standard-mode and fast-mode */
-	if (WARN_ON(t->bus_freq_hz > 400000))
-		t->bus_freq_hz = 400000;
+	if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ))
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))
@@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
 	int ret = 0;
 
 	/* Support standard-mode, fast-mode and fast-mode plus */
-	if (WARN_ON(t->bus_freq_hz > 1000000))
-		t->bus_freq_hz = 1000000;
+	if (WARN_ON(t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ))
+		t->bus_freq_hz = I2C_MAX_FAST_MODE_PLUS_FREQ;
 
 	/* prevent scl_rate_khz from becoming 0 */
 	if (WARN_ON(t->bus_freq_hz < 1000))

drivers/i2c/busses/i2c-s3c2410.c

@@ -835,11 +835,11 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 	int freq;
 
 	i2c->clkrate = clkin;
-	clkin /= 1000;		/* clkin now in KHz */
+	clkin /= 1000;	/* clkin now in KHz */
 
 	dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
 
-	target_frequency = pdata->frequency ? pdata->frequency : 100000;
+	target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ;
 
 	target_frequency /= 1000; /* Target frequency now in KHz */
 

drivers/i2c/busses/i2c-sh_mobile.c

@@ -145,9 +145,6 @@ struct sh_mobile_dt_config {
 
 #define IIC_FLAG_HAS_ICIC67	(1 << 0)
 
-#define STANDARD_MODE		100000
-#define FAST_MODE		400000
-
 /* Register offsets */
 #define ICDR			0x00
 #define ICCR			0x04
@@ -270,11 +267,11 @@ static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
 
 	i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
 
-	if (pd->bus_speed == STANDARD_MODE) {
+	if (pd->bus_speed == I2C_MAX_STANDARD_MODE_FREQ) {
 		tLOW	= 47;	/* tLOW = 4.7 us */
 		tHIGH	= 40;	/* tHD;STA = tHIGH = 4.0 us */
 		tf	= 3;	/* tf = 0.3 us */
-	} else if (pd->bus_speed == FAST_MODE) {
+	} else if (pd->bus_speed == I2C_MAX_FAST_MODE_FREQ) {
 		tLOW	= 13;	/* tLOW = 1.3 us */
 		tHIGH	= 6;	/* tHD;STA = tHIGH = 0.6 us */
 		tf	= 3;	/* tf = 0.3 us */
@@ -851,7 +848,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		return PTR_ERR(pd->reg);
 
 	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
-	pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed;
+	pd->bus_speed = (ret || !bus_speed) ? I2C_MAX_STANDARD_MODE_FREQ : bus_speed;
 	pd->clks_per_count = 1;
 
 	/* Newer variants come with two new bits in ICIC */

drivers/i2c/busses/i2c-sirf.c

@@ -62,7 +62,6 @@
 #define SIRFSOC_I2C_STOP		BIT(6)
 #define SIRFSOC_I2C_START		BIT(7)
 
-#define SIRFSOC_I2C_DEFAULT_SPEED 100000
 #define SIRFSOC_I2C_ERR_NOACK      1
 #define SIRFSOC_I2C_ERR_TIMEOUT    2
 
@@ -353,7 +352,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 	err = of_property_read_u32(pdev->dev.of_node,
 		"clock-frequency", &bitrate);
 	if (err < 0)
-		bitrate = SIRFSOC_I2C_DEFAULT_SPEED;
+		bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 
 	/*
 	 * Due to some hardware design issues, we need to tune the formula.

drivers/i2c/busses/i2c-sprd.c

@@ -337,9 +337,9 @@ static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq)
 	writel(div1, i2c_dev->base + ADDR_DVD1);
 
 	/* Start hold timing = hold time(us) * source clock */
-	if (freq == 400000)
+	if (freq == I2C_MAX_FAST_MODE_FREQ)
 		writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
-	else if (freq == 100000)
+	else if (freq == I2C_MAX_STANDARD_MODE_FREQ)
 		writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
 }
 
@@ -502,7 +502,7 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 	snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
 		 "%s", "sprd-i2c");
 
-	i2c_dev->bus_freq = 100000;
+	i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ;
 	i2c_dev->adap.owner = THIS_MODULE;
 	i2c_dev->dev = dev;
 	i2c_dev->adap.retries = 3;
@@ -516,7 +516,8 @@ static int sprd_i2c_probe(struct platform_device *pdev)
 		i2c_dev->bus_freq = prop;
 
 	/* We only support 100k and 400k now, otherwise will return error. */
-	if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
+	if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ)
 		return -EINVAL;
 
 	ret = sprd_i2c_clk_init(i2c_dev);

drivers/i2c/busses/i2c-st.c

@@ -213,7 +213,7 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
  */
 static struct st_i2c_timings i2c_timings[] = {
 	[I2C_MODE_STANDARD] = {
-		.rate			= 100000,
+		.rate			= I2C_MAX_STANDARD_MODE_FREQ,
 		.rep_start_hold		= 4400,
 		.rep_start_setup	= 5170,
 		.start_hold		= 4400,
@@ -222,7 +222,7 @@ static struct st_i2c_timings i2c_timings[] = {
 		.bus_free_time		= 5170,
 	},
 	[I2C_MODE_FAST] = {
-		.rate			= 400000,
+		.rate			= I2C_MAX_FAST_MODE_FREQ,
 		.rep_start_hold		= 660,
 		.rep_start_setup	= 660,
 		.start_hold		= 660,
@@ -835,7 +835,7 @@ static int st_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->mode = I2C_MODE_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if ((!ret) && (clk_rate == 400000))
+	if (!ret && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
 		i2c_dev->mode = I2C_MODE_FAST;
 
 	i2c_dev->dev = &pdev->dev;

drivers/i2c/busses/i2c-stm32f4.c

@@ -232,10 +232,10 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * In standard mode:
 		 * t_scl_high = t_scl_low = CCR * I2C parent clk period
 		 * So to reach 100 kHz, we have:
-		 * CCR = I2C parent rate / 100 kHz >> 1
+		 * CCR = I2C parent rate / (100 kHz * 2)
 		 *
 		 * For example with parent rate = 2 MHz:
-		 * CCR = 2000000 / (100000 << 1) = 10
+		 * CCR = 2000000 / (100000 * 2) = 10
 		 * t_scl_high = t_scl_low = 10 * (1 / 2000000) = 5000 ns
 		 * t_scl_high + t_scl_low = 10000 ns so 100 kHz is reached
 		 *
@@ -243,7 +243,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 8 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = i2c_dev->parent_rate / (100000 << 1);
+		val = i2c_dev->parent_rate / (I2C_MAX_STANDARD_MODE_FREQ * 2);
 	} else {
 		/*
 		 * In fast mode, we compute CCR with duty = 0 as with low
@@ -263,7 +263,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 6 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3);
+		val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_MAX_FAST_MODE_FREQ * 3);
 
 		/* Select Fast mode */
 		ccr |= STM32F4_I2C_CCR_FS;
@@ -807,7 +807,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if (!ret && clk_rate >= 400000)
+	if (!ret && clk_rate >= I2C_MAX_FAST_MODE_FREQ)
 		i2c_dev->speed = STM32_I2C_SPEED_FAST;
 
 	i2c_dev->dev = &pdev->dev;

drivers/i2c/busses/i2c-stu300.c

@@ -132,7 +132,7 @@ enum stu300_error {
 #define NUM_ADDR_RESEND_ATTEMPTS 12
 
 /* I2C clock speed, in Hz 0-400kHz*/
-static unsigned int scl_frequency = 100000;
+static unsigned int scl_frequency = I2C_MAX_STANDARD_MODE_FREQ;
 module_param(scl_frequency, uint,  0644);
 
 /**
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	dev_dbg(&dev->pdev->dev, "Clock rate %lu Hz, I2C bus speed %d Hz "
 		"virtbase %p\n", clkrate, dev->speed, dev->virtbase);
 
-	if (dev->speed > 100000)
+	if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ)
 		/* Fast Mode I2C */
 		val = ((clkrate/dev->speed) - 9)/3 + 1;
 	else
@@ -518,7 +518,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 		return -EINVAL;
 	}
 
-	if (dev->speed > 100000) {
+	if (dev->speed > I2C_MAX_STANDARD_MODE_FREQ) {
 		/* CC6..CC0 */
 		stu300_wr8((val & I2C_CCR_CC_MASK) | I2C_CCR_FMSM,
 			   dev->virtbase + I2C_CCR);

drivers/i2c/busses/i2c-sun6i-p2wi.c

@@ -186,7 +186,7 @@ static int p2wi_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct device_node *childnp;
 	unsigned long parent_clk_freq;
-	u32 clk_freq = 100000;
+	u32 clk_freq = I2C_MAX_STANDARD_MODE_FREQ;
 	struct resource *r;
 	struct p2wi *p2wi;
 	u32 slave_addr;

drivers/i2c/busses/i2c-synquacer.c

@@ -67,10 +67,10 @@
 
 /* STANDARD MODE frequency */
 #define SYNQUACER_I2C_CLK_MASTER_STD(rate)			\
-	DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2)
+	DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_MAX_STANDARD_MODE_FREQ) - 2, 2)
 /* FAST MODE frequency */
 #define SYNQUACER_I2C_CLK_MASTER_FAST(rate)			\
-	DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3)
+	DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_MAX_FAST_MODE_FREQ) - 2) * 2, 3)
 
 /* (clkrate <= 18000000) */
 /* calculate the value of CS bits in CCR register on standard mode */
@@ -602,7 +602,7 @@ static int synquacer_i2c_probe(struct platform_device *pdev)
 	i2c->adapter.nr = pdev->id;
 	init_completion(&i2c->completion);
 
-	if (bus_speed < 400000)
+	if (bus_speed < I2C_MAX_FAST_MODE_FREQ)
 		i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
 	else
 		i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;

drivers/i2c/busses/i2c-tegra.c

@@ -123,10 +123,6 @@
 #define I2C_THIGH_SHIFT				8
 #define I2C_INTERFACE_TIMING_1			0x98
 
-#define I2C_STANDARD_MODE			100000
-#define I2C_FAST_MODE				400000
-#define I2C_FAST_PLUS_MODE			1000000
-
 /* Packet header size in bytes */
 #define I2C_PACKET_HEADER_SIZE			12
 
@@ -737,8 +733,8 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
 	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
 
-	if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
-	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE) {
+	if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
 		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
 		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
 		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
@@ -1341,7 +1337,7 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
 	ret = of_property_read_u32(np, "clock-frequency",
 				   &i2c_dev->bus_clk_rate);
 	if (ret)
-		i2c_dev->bus_clk_rate = 100000; /* default clock rate */
+		i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
 
 	multi_mode = of_property_read_bool(np, "multi-master");
 	i2c_dev->is_multimaster_mode = multi_mode;
@@ -1640,12 +1636,12 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (i2c_dev->bus_clk_rate > I2C_FAST_MODE &&
-	    i2c_dev->bus_clk_rate <= I2C_FAST_PLUS_MODE)
+	if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
+	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
 		i2c_dev->clk_divisor_non_hs_mode =
 				i2c_dev->hw->clk_divisor_fast_plus_mode;
-	else if (i2c_dev->bus_clk_rate > I2C_STANDARD_MODE &&
-		 i2c_dev->bus_clk_rate <= I2C_FAST_MODE)
+	else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
+		 i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
 		i2c_dev->clk_divisor_non_hs_mode =
 				i2c_dev->hw->clk_divisor_fast_mode;
 	else

drivers/i2c/busses/i2c-thunderx-pcidrv.c

@@ -183,7 +183,7 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	thunder_i2c_clock_enable(dev, i2c);
 	ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
 	if (ret)
-		i2c->twsi_freq = 100000;
+		i2c->twsi_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	init_waitqueue_head(&i2c->queue);
 

drivers/i2c/busses/i2c-uniphier-f.c

@@ -73,8 +73,6 @@
 #define UNIPHIER_FI2C_BYTE_WISE		BIT(3)
 #define UNIPHIER_FI2C_DEFER_STOP_COMP	BIT(4)
 
-#define UNIPHIER_FI2C_DEFAULT_SPEED	100000
-#define UNIPHIER_FI2C_MAX_SPEED		400000
 #define UNIPHIER_FI2C_FIFO_SIZE		8
 
 struct uniphier_fi2c_priv {
@@ -537,9 +535,9 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 
-	if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+	if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
 		return -EINVAL;
 	}

drivers/i2c/busses/i2c-uniphier.c

@@ -35,9 +35,6 @@
 #define UNIPHIER_I2C_NOISE	0x1c	/* noise filter control */
 #define UNIPHIER_I2C_SETUP	0x20	/* setup time control */
 
-#define UNIPHIER_I2C_DEFAULT_SPEED	100000
-#define UNIPHIER_I2C_MAX_SPEED		400000
-
 struct uniphier_i2c_priv {
 	struct completion comp;
 	struct i2c_adapter adap;
@@ -333,9 +330,9 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 	}
 
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
-		bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+		bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
 
-	if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+	if (!bus_speed || bus_speed > I2C_MAX_FAST_MODE_FREQ) {
 		dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
 		return -EINVAL;
 	}

drivers/i2c/busses/i2c-wmt.c

@@ -399,7 +399,7 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->mode = I2C_MODE_STANDARD;
 	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if ((!err) && (clk_rate == 400000))
+	if (!err && (clk_rate == I2C_MAX_FAST_MODE_FREQ))
 		i2c_dev->mode = I2C_MODE_FAST;
 
 	i2c_dev->dev = &pdev->dev;

drivers/i2c/busses/i2c-xlp9xx.c

@@ -71,8 +71,6 @@
 #define XLP9XX_I2C_SLAVEADDR_ADDR_SHIFT		1
 
 #define XLP9XX_I2C_IP_CLK_FREQ		133000000UL
-#define XLP9XX_I2C_DEFAULT_FREQ		100000
-#define XLP9XX_I2C_HIGH_FREQ		400000
 #define XLP9XX_I2C_FIFO_SIZE		0x80U
 #define XLP9XX_I2C_TIMEOUT_MS		1000
 #define XLP9XX_I2C_BUSY_TIMEOUT		50
@@ -476,12 +474,12 @@ static int xlp9xx_i2c_get_frequency(struct platform_device *pdev,
 
 	err = device_property_read_u32(&pdev->dev, "clock-frequency", &freq);
 	if (err) {
-		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		freq = I2C_MAX_STANDARD_MODE_FREQ;
 		dev_dbg(&pdev->dev, "using default frequency %u\n", freq);
-	} else if (freq == 0 || freq > XLP9XX_I2C_HIGH_FREQ) {
+	} else if (freq == 0 || freq > I2C_MAX_FAST_MODE_FREQ) {
 		dev_warn(&pdev->dev, "invalid frequency %u, using default\n",
 			 freq);
-		freq = XLP9XX_I2C_DEFAULT_FREQ;
+		freq = I2C_MAX_STANDARD_MODE_FREQ;
 	}
 	priv->clk_hz = freq;
 

drivers/i2c/busses/i2c-xlr.c

@@ -404,7 +404,7 @@ static int xlr_i2c_probe(struct platform_device *pdev)
 
 	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				 &busfreq))
-		busfreq = 100000;
+		busfreq = I2C_MAX_STANDARD_MODE_FREQ;
 
 	clk = devm_clk_get(&pdev->dev, NULL);
 	if (!IS_ERR(clk)) {