staging: rtl8188eu: clean up alignment style issues

Clean up alignment style issues to follow kernel coding style
and clear checkpatch issues.

CHECK: Alignment should match open parenthesis
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200919090040.9613-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/core/rtw_mlme.c

@@ -1730,7 +1730,7 @@ int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_
 	    (ndisauthmode == Ndis802_11AuthModeWPAPSK))
 		authmode = _WPA_IE_ID_;
 	else if ((ndisauthmode == Ndis802_11AuthModeWPA2) ||
-	    (ndisauthmode == Ndis802_11AuthModeWPA2PSK))
+	         (ndisauthmode == Ndis802_11AuthModeWPA2PSK))
 		authmode = _WPA2_IE_ID_;
 	else
 		authmode = 0x0;

drivers/staging/rtl8188eu/hal/phy.c

@@ -51,8 +51,7 @@ void phy_set_bb_reg(struct adapter *adapt, u32 regaddr, u32 bitmask, u32 data)
 	usb_write32(adapt, regaddr, data);
 }
 
-static u32 rf_serial_read(struct adapter *adapt,
-			enum rf_radio_path rfpath, u32 offset)
+static u32 rf_serial_read(struct adapter *adapt, enum rf_radio_path rfpath, u32 offset)
 {
 	u32 ret = 0;
 	struct bb_reg_def *phyreg = &adapt->HalData->PHYRegDef[rfpath];
@@ -107,7 +106,7 @@ static void rf_serial_write(struct adapter *adapt,
 }
 
 u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
-		     u32 reg_addr, u32 bit_mask)
+		       u32 reg_addr, u32 bit_mask)
 {
 	u32 original_value, bit_shift;
 
@@ -117,7 +116,7 @@ u32 rtw_hal_read_rfreg(struct adapter *adapt, enum rf_radio_path rf_path,
 }
 
 void phy_set_rf_reg(struct adapter *adapt, enum rf_radio_path rf_path,
-		     u32 reg_addr, u32 bit_mask, u32 data)
+		    u32 reg_addr, u32 bit_mask, u32 data)
 {
 	u32 original_value, bit_shift;
 
@@ -190,7 +189,7 @@ void phy_set_tx_power_level(struct adapter *adapt, u8 channel)
 
 	rtl88eu_phy_rf6052_set_cck_txpower(adapt, &cck_pwr[0]);
 	rtl88eu_phy_rf6052_set_ofdm_txpower(adapt, &ofdm_pwr[0], &bw20_pwr[0],
-					  &bw40_pwr[0], channel);
+					    &bw40_pwr[0], channel);
 }
 
 static void phy_set_bw_mode_callback(struct adapter *adapt)
@@ -236,11 +235,11 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
 		 * These settings are required only for 40MHz
 		 */
 		phy_set_bb_reg(adapt, rCCK0_System, bCCKSideBand,
-		    (hal_data->nCur40MhzPrimeSC >> 1));
+			       (hal_data->nCur40MhzPrimeSC >> 1));
 		phy_set_bb_reg(adapt, rOFDM1_LSTF, 0xC00,
 			       hal_data->nCur40MhzPrimeSC);
 		phy_set_bb_reg(adapt, 0x818, (BIT(26) | BIT(27)),
-		   (hal_data->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+			       (hal_data->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
 		break;
 	default:
 		break;
@@ -251,7 +250,7 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
 }
 
 void rtw_hal_set_bwmode(struct adapter *adapt, enum ht_channel_width bandwidth,
-		     unsigned char offset)
+			unsigned char offset)
 {
 	struct hal_data_8188e *hal_data = adapt->HalData;
 	enum ht_channel_width tmp_bw = hal_data->CurrentChannelBW;
@@ -437,7 +436,7 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
 			thermal_val = (u8)(thermal_avg / thermal_avg_count);
 
 		if (dm_odm->RFCalibrateInfo.bDoneTxpower &&
-			!dm_odm->RFCalibrateInfo.bReloadtxpowerindex) {
+		    !dm_odm->RFCalibrateInfo.bReloadtxpowerindex) {
 			delta = abs(thermal_val - dm_odm->RFCalibrateInfo.ThermalValue);
 		} else {
 			delta = abs(thermal_val - hal_data->EEPROMThermalMeter);
@@ -1149,12 +1148,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
 		/* 1. Read original RF mode */
 		/* Path-A */
 		rf_a_mode = rtw_hal_read_rfreg(adapt, RF_PATH_A, RF_AC,
-					     bMask12Bits);
+					       bMask12Bits);
 
 		/* Path-B */
 		if (is2t)
 			rf_b_mode = rtw_hal_read_rfreg(adapt, RF_PATH_B, RF_AC,
-						     bMask12Bits);
+						       bMask12Bits);
 
 		/* 2. Set RF mode = standby mode */
 		/* Path-A */

drivers/staging/rtl8188eu/hal/rf_cfg.c

@@ -171,8 +171,7 @@ static void rtl_rfreg_delay(struct adapter *adapt, enum rf_radio_path rfpath, u3
 	}
 }
 
-static void rtl8188e_config_rf_reg(struct adapter *adapt,
-	u32 addr, u32 data)
+static void rtl8188e_config_rf_reg(struct adapter *adapt, u32 addr, u32 data)
 {
 	u32 content = 0x1000; /*RF Content: radio_a_txt*/
 	u32 maskforphyset = content & 0xE000;

drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c

@@ -406,7 +406,7 @@ void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoL
 		padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT(1)) ? true : false;
 
 		DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__,
-		padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown, padapter->pwrctrlpriv.bSupportRemoteWakeup);
+			padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown, padapter->pwrctrlpriv.bSupportRemoteWakeup);
 
 		DBG_88E("### PS params =>  power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable);
 	}

drivers/staging/rtl8188eu/hal/usb_halinit.c

@@ -78,8 +78,8 @@ void rtw_hal_chip_configure(struct adapter *adapt)
 	haldata->UsbRxAggPageCount	= 48; /* uint :128 b 0x0A;	10 = MAX_RX_DMA_BUFFER_SIZE/2/haldata->UsbBulkOutSize */
 	haldata->UsbRxAggPageTimeout	= 0x4; /* 6, absolute time = 34ms/(2^6) */
 
-	HalUsbSetQueuePipeMapping8188EUsb(adapt,
-				pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes);
+	HalUsbSetQueuePipeMapping8188EUsb(adapt, pdvobjpriv->RtNumInPipes,
+					  pdvobjpriv->RtNumOutPipes);
 }
 
 u32 rtw_hal_power_on(struct adapter *adapt)

drivers/staging/rtl8188eu/os_dep/rtw_android.c

@@ -68,7 +68,7 @@ int rtw_android_cmdstr_to_num(char *cmdstr)
 
 	for (cmd_num = 0; cmd_num < ANDROID_WIFI_CMD_MAX; cmd_num++)
 		if (!strncasecmp(cmdstr, android_wifi_cmd_str[cmd_num],
-				  strlen(android_wifi_cmd_str[cmd_num])))
+				 strlen(android_wifi_cmd_str[cmd_num])))
 			break;
 	return cmd_num;
 }
@@ -120,7 +120,7 @@ static int android_set_cntry(struct net_device *net, char *command,
 }
 
 static int android_get_p2p_addr(struct net_device *net, char *command,
-					int total_len)
+				int total_len)
 {
 	/* We use the same address as our HW MAC address */
 	memcpy(command, net->dev_addr, ETH_ALEN);

drivers/staging/rtl8188eu/os_dep/usb_intf.c

@@ -118,7 +118,7 @@ static void usb_dvobj_deinit(struct usb_interface *usb_intf)
 	if (dvobj) {
 		/* Modify condition for 92DU DMDP 2010.11.18, by Thomas */
 		if ((dvobj->NumInterfaces != 2 &&
-		    dvobj->NumInterfaces != 3) ||
+		     dvobj->NumInterfaces != 3) ||
 		    (dvobj->InterfaceNumber == 1)) {
 			if (interface_to_usbdev(usb_intf)->state !=
 			    USB_STATE_NOTATTACHED) {
@@ -209,8 +209,8 @@ static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message)
 	if ((!padapter->bup) || (padapter->bDriverStopped) ||
 	    (padapter->bSurpriseRemoved)) {
 		pr_debug("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n",
-			padapter->bup, padapter->bDriverStopped,
-			padapter->bSurpriseRemoved);
+			 padapter->bup, padapter->bDriverStopped,
+			 padapter->bSurpriseRemoved);
 		goto exit;
 	}
 
@@ -231,11 +231,11 @@ static int rtw_suspend(struct usb_interface *pusb_intf, pm_message_t message)
 	if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) &&
 	    check_fwstate(pmlmepriv, _FW_LINKED)) {
 		pr_debug("%s:%d %s(%pM), length:%d assoc_ssid.length:%d\n",
-			__func__, __LINE__,
-			pmlmepriv->cur_network.network.ssid.ssid,
-			pmlmepriv->cur_network.network.MacAddress,
-			pmlmepriv->cur_network.network.ssid.ssid_length,
-			pmlmepriv->assoc_ssid.ssid_length);
+			 __func__, __LINE__,
+			 pmlmepriv->cur_network.network.ssid.ssid,
+			 pmlmepriv->cur_network.network.MacAddress,
+			 pmlmepriv->cur_network.network.ssid.ssid_length,
+			 pmlmepriv->assoc_ssid.ssid_length);
 
 		pmlmepriv->to_roaming = 1;
 	}
@@ -300,7 +300,7 @@ static int rtw_resume_process(struct adapter *padapter)
 	if (pwrpriv)
 		pwrpriv->bInSuspend = false;
 	pr_debug("<===  %s return %d.............. in %dms\n", __func__,
-		ret, jiffies_to_msecs(jiffies - start_time));
+		 ret, jiffies_to_msecs(jiffies - start_time));
 
 	return ret;
 }
@@ -322,7 +322,8 @@ static int rtw_resume(struct usb_interface *pusb_intf)
  */
 
 static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
-	struct usb_interface *pusb_intf, const struct usb_device_id *pdid)
+					struct usb_interface *pusb_intf,
+					const struct usb_device_id *pdid)
 {
 	struct adapter *padapter = NULL;
 	struct net_device *pnetdev = NULL;
@@ -380,7 +381,7 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 		device_init_wakeup(&pusb_intf->dev, 1);
 		pr_debug("\n  padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~\n");
 		pr_debug("\n  padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[%d]~~~\n",
-			device_may_wakeup(&pusb_intf->dev));
+			 device_may_wakeup(&pusb_intf->dev));
 	}
 #endif
 
@@ -393,7 +394,7 @@ static struct adapter *rtw_usb_if1_init(struct dvobj_priv *dvobj,
 	rtw_macaddr_cfg(padapter->eeprompriv.mac_addr);
 	memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
 	pr_debug("MAC Address from pnetdev->dev_addr =  %pM\n",
-		pnetdev->dev_addr);
+		 pnetdev->dev_addr);
 
 	/* step 6. Tell the network stack we exist */
 	if (register_netdev(pnetdev) != 0) {
@@ -445,7 +446,7 @@ static void rtw_usb_if1_deinit(struct adapter *if1)
 
 	rtw_dev_unload(if1);
 	pr_debug("+r871xu_dev_remove, hw_init_completed=%d\n",
-		if1->hw_init_completed);
+		 if1->hw_init_completed);
 	rtw_free_drv_sw(if1);
 	rtw_free_netdev(pnetdev);
 }