Commit 90fd840e authored by Mark Brown's avatar Mark Brown

Merge series "regulator: mcp16502: make lpm pin optional" from Claudiu Beznea...

Merge series "regulator: mcp16502: make lpm pin optional" from Claudiu Beznea <claudiu.beznea@microchip.com>:

Hi,

This patch makes the LPM pin as optional as this may be controlled
in the last phase of suspend procedure to decrease the power consumption
while suspended. Along w/ this update the MAINTAINERS entry for this
driver.

Thank you,
Claudiu Beznea

Claudiu Beznea (3):
  dt-bindings: regulator: mcp16502: document lpm as optional
  regulator: mcp16502: lpm pin can be optional on some platforms
  MAINTAINERS: add myself as maintainer for mcp16502

 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt | 3 ++-
 MAINTAINERS                                                        | 4 ++--
 drivers/regulator/mcp16502.c                                       | 2 +-
 3 files changed, 5 insertions(+), 4 deletions(-)

--
2.7.4

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
parents 907dfdc9 eea0b4e2
......@@ -4,7 +4,8 @@ Required properties:
- compatible: "microchip,mcp16502"
- reg: I2C slave address
- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
suspend-to-ram, keeping the PMIC into HIBERNATE mode.
suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
property is optional;
- regulators: A node that houses a sub-node for each regulator within
the device. Each sub-node is identified using the node's
name. The content of each sub-node is defined by the
......
......@@ -11690,9 +11690,9 @@ F: drivers/video/fbdev/atmel_lcdfb.c
F: include/video/atmel_lcdc.h
MICROCHIP MCP16502 PMIC DRIVER
M: Andrei Stefanescu <andrei.stefanescu@microchip.com>
M: Claudiu Beznea <claudiu.beznea@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Supported
F: Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
F: drivers/regulator/mcp16502.c
......
......@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_client *client,
config.regmap = rmap;
config.driver_data = mcp;
mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
if (IS_ERR(mcp->lpm)) {
dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
return PTR_ERR(mcp->lpm);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment