Merge tag 'omap-for-v3.8/devel-prcm-signed' of...

Merge tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2

From Tony Lindgren:

omap prcm changes via Paul Walmsley <paul@pwsan.com>:

Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM
change needed for one of the hwmod patches to function.

Basic test logs for this branch on top of Tony's
omap-for-v3.8/clock branch at commit
558a0780 are here:

http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/

However, omap-for-v3.8/clock at 558a0780 does not include some fixes
that are needed for a successful test.  With several reverts,
fixes, and workarounds applied, the following test logs were
obtained:

http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/

which indicate that the series tests cleanly.

* tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits)
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP44xx: clock: drop obsolete clock data
  ARM: OMAP4: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP: hwmod: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP: clock: Switch to COMMON clk
  ARM: OMAP2: clock: Add 24xx data using common struct clk
  ARM: OMAP3: clock: Add 3xxx data using common struct clk
  ARM: AM33XX: clock: add clock data in common clock format
  ARM: OMAP4: clock: Add 44xx data using common struct clk
  ARM: OMAP2+: clock: add OMAP CCF convenience macros to mach-omap2/clock.h
  ...

Some context conflicts due to nearby changes resolved in
arch/arm/mach-omap2/io.c.
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-omap2/Kconfig

@@ -34,6 +34,7 @@ config ARCH_OMAP2
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
+	select COMMON_CLK
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -47,6 +48,7 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select SOC_HAS_OMAP2_SDRC
+	select COMMON_CLK
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
@@ -68,6 +70,7 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select COMMON_CLK
 
 config SOC_OMAP5
 	bool "TI OMAP5"
@@ -77,6 +80,7 @@ config SOC_OMAP5
 	select CPU_V7
 	select HAVE_SMP
 	select SOC_HAS_REALTIME_COUNTER
+	select COMMON_CLK
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -111,6 +115,7 @@ config SOC_AM33XX
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
+	select COMMON_CLK
 
 config OMAP_PACKAGE_ZAF
        bool

arch/arm/mach-omap2/Makefile

@@ -160,17 +160,17 @@ obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_apll.o clkt2xxx_osc.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= cclock2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o cclock2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o cclock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) cclock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX)		+= clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= cclock33xx_data.o
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= dpll3xxx.o dpll44xx.o
 

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -38,62 +38,88 @@
 
 /* Private functions */
 
-static int _apll96_enable(struct clk *clk)
+/**
+ * omap2xxx_clk_apll_locked - is the APLL locked?
+ * @hw: struct clk_hw * of the APLL to check
+ *
+ * If the APLL IP block referred to by @hw indicates that it's locked,
+ * return true; otherwise, return false.
+ */
+static bool omap2xxx_clk_apll_locked(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	u32 r, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	return ((r & apll_mask) == apll_mask) ? true : false;
+}
+
+int omap2_clk_apll96_enable(struct clk_hw *hw)
 {
 	return omap2xxx_cm_apll96_enable();
 }
 
-static int _apll54_enable(struct clk *clk)
+int omap2_clk_apll54_enable(struct clk_hw *hw)
 {
 	return omap2xxx_cm_apll54_enable();
 }
 
-static void _apll96_allow_idle(struct clk *clk)
+static void _apll96_allow_idle(struct clk_hw_omap *clk)
 {
 	omap2xxx_cm_set_apll96_auto_low_power_stop();
 }
 
-static void _apll96_deny_idle(struct clk *clk)
+static void _apll96_deny_idle(struct clk_hw_omap *clk)
 {
 	omap2xxx_cm_set_apll96_disable_autoidle();
 }
 
-static void _apll54_allow_idle(struct clk *clk)
+static void _apll54_allow_idle(struct clk_hw_omap *clk)
 {
 	omap2xxx_cm_set_apll54_auto_low_power_stop();
 }
 
-static void _apll54_deny_idle(struct clk *clk)
+static void _apll54_deny_idle(struct clk_hw_omap *clk)
 {
 	omap2xxx_cm_set_apll54_disable_autoidle();
 }
 
-static void _apll96_disable(struct clk *clk)
+void omap2_clk_apll96_disable(struct clk_hw *hw)
 {
 	omap2xxx_cm_apll96_disable();
 }
 
-static void _apll54_disable(struct clk *clk)
+void omap2_clk_apll54_disable(struct clk_hw *hw)
 {
 	omap2xxx_cm_apll54_disable();
 }
 
-/* Public data */
+unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	return (omap2xxx_clk_apll_locked(hw)) ? 54000000 : 0;
+}
 
-const struct clkops clkops_apll96 = {
-	.enable		= _apll96_enable,
-	.disable	= _apll96_disable,
-	.allow_idle	= _apll96_allow_idle,
-	.deny_idle	= _apll96_deny_idle,
-};
+unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw,
+				      unsigned long parent_rate)
+{
+	return (omap2xxx_clk_apll_locked(hw)) ? 96000000 : 0;
+}
 
-const struct clkops clkops_apll54 = {
-	.enable		= _apll54_enable,
-	.disable	= _apll54_disable,
+/* Public data */
+const struct clk_hw_omap_ops clkhwops_apll54 = {
 	.allow_idle	= _apll54_allow_idle,
 	.deny_idle	= _apll54_deny_idle,
 };
 
+const struct clk_hw_omap_ops clkhwops_apll96 = {
+	.allow_idle	= _apll96_allow_idle,
+	.deny_idle	= _apll96_deny_idle,
+};
+
 /* Public functions */
 
 u32 omap2xxx_get_apll_clkin(void)

arch/arm/mach-omap2/clkt2xxx_dpll.c

@@ -29,7 +29,7 @@
  * REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
  * instead.  Add some mechanism to optionally enter this mode.
  */
-static void _allow_idle(struct clk *clk)
+static void _allow_idle(struct clk_hw_omap *clk)
 {
 	if (!clk || !clk->dpll_data)
 		return;
@@ -43,7 +43,7 @@ static void _allow_idle(struct clk *clk)
  *
  * Disable DPLL automatic idle control.  No return value.
  */
-static void _deny_idle(struct clk *clk)
+static void _deny_idle(struct clk_hw_omap *clk)
 {
 	if (!clk || !clk->dpll_data)
 		return;
@@ -53,9 +53,7 @@ static void _deny_idle(struct clk *clk)
 
 
 /* Public data */
-
-const struct clkops clkops_omap2xxx_dpll_ops = {
+const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll = {
 	.allow_idle	= _allow_idle,
 	.deny_idle	= _deny_idle,
 };
-

arch/arm/mach-omap2/clkt2xxx_dpllcore.c

@@ -40,7 +40,7 @@
  * (currently defined as "dpll_ck" in the OMAP2xxx clock tree).  Set
  * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
  */
-static struct clk *dpll_core_ck;
+static struct clk_hw_omap *dpll_core_ck;
 
 /**
  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
@@ -104,13 +104,16 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 }
 
-unsigned long omap2_dpllcore_recalc(struct clk *clk)
+unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate)
 {
 	return omap2xxx_clk_get_core_rate();
 }
 
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 cur_rate, low, mult, div, valid_rate, done_rate;
 	u32 bypass = 0;
 	struct prcm_config tmpset;
@@ -188,8 +191,8 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
  * statically defined, this code may need to change to increment some
  * kind of use count on dpll_ck.
  */
-void omap2xxx_clkt_dpllcore_init(struct clk *clk)
+void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
 {
 	WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
-	dpll_core_ck = clk;
+	dpll_core_ck = to_clk_hw_omap(hw);
 }

arch/arm/mach-omap2/clkt2xxx_osc.c

@@ -35,7 +35,7 @@
  * clk_enable/clk_disable()-based usecounting for osc_ck should be
  * replaced with autoidle-based usecounting.
  */
-static int omap2_enable_osc_ck(struct clk *clk)
+int omap2_enable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
@@ -53,7 +53,7 @@ static int omap2_enable_osc_ck(struct clk *clk)
  * clk_enable/clk_disable()-based usecounting for osc_ck should be
  * replaced with autoidle-based usecounting.
  */
-static void omap2_disable_osc_ck(struct clk *clk)
+void omap2_disable_osc_ck(struct clk_hw *clk)
 {
 	u32 pcc;
 
@@ -62,13 +62,8 @@ static void omap2_disable_osc_ck(struct clk *clk)
 	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
 }
 
-const struct clkops clkops_oscck = {
-	.enable		= omap2_enable_osc_ck,
-	.disable	= omap2_disable_osc_ck,
-};
-
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
+unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
+				   unsigned long parent_rate)
 {
 	return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
 }
-

arch/arm/mach-omap2/clkt2xxx_sys.c

@@ -40,9 +40,8 @@ u32 omap2xxx_get_sysclkdiv(void)
 	return div;
 }
 
-unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
+unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
+				      unsigned long parent_rate)
 {
-	return clk->parent->rate / omap2xxx_get_sysclkdiv();
+	return parent_rate / omap2xxx_get_sysclkdiv();
 }
-
-

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -58,7 +58,8 @@ static unsigned long sys_ck_rate;
  *
  * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
  */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
+unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
+				     unsigned long parent_rate)
 {
 	return curr_prcm_set->mpu_speed;
 }
@@ -70,7 +71,8 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
  * just uses the ARM rates.
  */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *parent_rate)
 {
 	const struct prcm_config *ptr;
 	long highest_rate;
@@ -93,7 +95,8 @@ long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
 }
 
 /* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
 {
 	u32 cur_rate, done_rate, bypass = 0, tmp;
 	const struct prcm_config *prcm;

arch/arm/mach-omap2/clkt34xx_dpll3m2.c

@@ -44,8 +44,10 @@
  * Program the DPLL M2 divider with the rounded target rate.  Returns
  * -EINVAL upon error, or 0 upon success.
  */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 new_div = 0;
 	u32 unlock_dll = 0;
 	u32 c;
@@ -63,7 +65,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	sdrcrate = __clk_get_rate(sdrc_ick_p);
-	clkrate = __clk_get_rate(clk);
+	clkrate = __clk_get_rate(hw->clk);
 	if (rate > clkrate)
 		sdrcrate <<= ((rate / clkrate) >> 1);
 	else
@@ -112,8 +114,6 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
-	clk->rate = rate;
-
 	return 0;
 }
 

arch/arm/mach-omap2/clkt_dpll.c

@@ -16,7 +16,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 
 #include <asm/div64.h>
@@ -76,7 +76,7 @@
  * (assuming that it is counting N upwards), or -2 if the enclosing loop
  * should skip to the next iteration (again assuming N is increasing).
  */
-static int _dpll_test_fint(struct clk *clk, u8 n)
+static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
 {
 	struct dpll_data *dd;
 	long fint, fint_min, fint_max;
@@ -85,7 +85,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
-	fint = __clk_get_rate(__clk_get_parent(clk)) / n;
+	fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
 
 	if (cpu_is_omap24xx()) {
 		/* Should not be called for OMAP2, so warn if it is called */
@@ -186,15 +186,15 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
 }
 
 /* Public functions */
-
-void omap2_init_dpll_parent(struct clk *clk)
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	u32 v;
 	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
 	if (!dd)
-		return;
+		return -EINVAL;
 
 	v = __raw_readl(dd->control_reg);
 	v &= dd->enable_mask;
@@ -204,18 +204,18 @@ void omap2_init_dpll_parent(struct clk *clk)
 	if (cpu_is_omap24xx()) {
 		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
+			return 1;
 	} else if (cpu_is_omap34xx()) {
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
+			return 1;
 	} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
 		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
 		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
+			return 1;
 	}
-	return;
+	return 0;
 }
 
 /**
@@ -232,7 +232,7 @@ void omap2_init_dpll_parent(struct clk *clk)
  * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
  * if the clock @clk is not a DPLL.
  */
-u32 omap2_get_dpll_rate(struct clk *clk)
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 {
 	long long dpll_clk;
 	u32 dpll_mult, dpll_div, v;
@@ -288,8 +288,10 @@ u32 omap2_get_dpll_rate(struct clk *clk)
  * (expensive) function again.  Returns ~0 if the target rate cannot
  * be rounded, or the rounded rate upon success.
  */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+		unsigned long *parent_rate)
 {
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	int m, n, r, scaled_max_m;
 	unsigned long scaled_rt_rp;
 	unsigned long new_rate = 0;
@@ -303,7 +305,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	dd = clk->dpll_data;
 
 	ref_rate = __clk_get_rate(dd->clk_ref);
-	clk_name = __clk_get_name(clk);
+	clk_name = __clk_get_name(hw->clk);
 	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
 		 clk_name, target_rate);
 

arch/arm/mach-omap2/clkt_iclk.c

@@ -11,7 +11,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 
 
@@ -23,7 +23,7 @@
 /* Private functions */
 
 /* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk *clk)
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
 {
 	u32 v, r;
 
@@ -35,7 +35,7 @@ void omap2_clkt_iclk_allow_idle(struct clk *clk)
 }
 
 /* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk *clk)
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
 {
 	u32 v, r;
 
@@ -48,33 +48,17 @@ void omap2_clkt_iclk_deny_idle(struct clk *clk)
 
 /* Public data */
 
-const struct clkops clkops_omap2_iclk_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
+const struct clk_hw_omap_ops clkhwops_iclk = {
 	.allow_idle	= omap2_clkt_iclk_allow_idle,
 	.deny_idle	= omap2_clkt_iclk_deny_idle,
 };
 
-const struct clkops clkops_omap2_iclk_dflt = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
 	.allow_idle	= omap2_clkt_iclk_allow_idle,
 	.deny_idle	= omap2_clkt_iclk_deny_idle,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
+	.find_companion	= omap2_clk_dflt_find_companion,
 };
 
-const struct clkops clkops_omap2_iclk_idle_only = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
 
-const struct clkops clkops_omap2_mdmclk_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};