Commit 91a2fcc8 authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers.

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 90b02340
......@@ -65,8 +65,6 @@
#define EXT_INTC1_REQ1 5 /* IP 5 */
#define MIPS_TIMER_IP 7 /* IP 7 */
extern void mips_timer_interrupt(void);
void (*board_init_irq)(void);
static DEFINE_SPINLOCK(irq_lock);
......@@ -635,7 +633,7 @@ asmlinkage void plat_irq_dispatch(void)
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & CAUSEF_IP7)
mips_timer_interrupt();
ll_timer_interrupt(63);
else if (pending & CAUSEF_IP2)
intc0_req0_irqdispatch();
else if (pending & CAUSEF_IP3)
......
......@@ -64,48 +64,8 @@ static unsigned long last_pc0, last_match20;
static DEFINE_SPINLOCK(time_lock);
static inline void ack_r4ktimer(unsigned long newval)
{
write_c0_compare(newval);
}
/*
* There are a lot of conceptually broken versions of the MIPS timer interrupt
* handler floating around. This one is rather different, but the algorithm
* is provably more robust.
*/
unsigned long wtimer;
void mips_timer_interrupt(void)
{
int irq = 63;
irq_enter();
kstat_this_cpu.irqs[irq]++;
if (r4k_offset == 0)
goto null;
do {
kstat_this_cpu.irqs[irq]++;
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
r4k_cur += r4k_offset;
ack_r4ktimer(r4k_cur);
} while (((unsigned long)read_c0_count()
- r4k_cur) < 0x7fffffff);
irq_exit();
return;
null:
ack_r4ktimer(0);
irq_exit();
}
#ifdef CONFIG_PM
irqreturn_t counter0_irq(int irq, void *dev_id)
{
......
......@@ -867,7 +867,7 @@ void ipi_decode(struct smtc_ipi *pipi)
#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
clock_hang_reported[dest_copy] = 0;
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
local_timer_interrupt(0, NULL);
local_timer_interrupt(0);
irq_exit();
break;
case LINUX_SMP_IPI:
......
......@@ -144,7 +144,7 @@ void local_timer_interrupt(int irq, void *dev_id)
* High-level timer interrupt service routines. This function
* is set as irqaction->handler and is invoked through do_IRQ.
*/
irqreturn_t timer_interrupt(int irq, void *dev_id)
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
write_seqlock(&xtime_lock);
......@@ -174,9 +174,10 @@ int null_perf_irq(void)
return 0;
}
EXPORT_SYMBOL(null_perf_irq);
int (*perf_irq)(void) = null_perf_irq;
EXPORT_SYMBOL(null_perf_irq);
EXPORT_SYMBOL(perf_irq);
/*
......@@ -208,35 +209,79 @@ static inline int handle_perf_irq (int r2)
!r2;
}
asmlinkage void ll_timer_interrupt(int irq)
void ll_timer_interrupt(int irq, void *dev_id)
{
int r2 = cpu_has_mips_r2;
int cpu = smp_processor_id();
irq_enter();
kstat_this_cpu.irqs[irq]++;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* In an SMTC system, one Count/Compare set exists per VPE.
* Which TC within a VPE gets the interrupt is essentially
* random - we only know that it shouldn't be one with
* IXMT set. Whichever TC gets the interrupt needs to
* send special interprocessor interrupts to the other
* TCs to make sure that they schedule, etc.
*
* That code is specific to the SMTC kernel, not to
* the a particular platform, so it's invoked from
* the general MIPS timer_interrupt routine.
*/
/*
* We could be here due to timer interrupt,
* perf counter overflow, or both.
*/
(void) handle_perf_irq(1);
if (read_c0_cause() & (1 << 30)) {
/*
* There are things we only want to do once per tick
* in an "MP" system. One TC of each VPE will take
* the actual timer interrupt. The others will get
* timer broadcast IPIs. We use whoever it is that takes
* the tick on VPE 0 to run the full timer_interrupt().
*/
if (cpu_data[cpu].vpe_id == 0) {
timer_interrupt(irq, NULL);
} else {
write_c0_compare(read_c0_count() +
(mips_hpt_frequency/HZ));
local_timer_interrupt(irq, dev_id);
}
smtc_timer_broadcast(cpu_data[cpu].vpe_id);
}
#else /* CONFIG_MIPS_MT_SMTC */
int r2 = cpu_has_mips_r2;
if (handle_perf_irq(r2))
goto out;
return;
if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
goto out;
timer_interrupt(irq, NULL);
out:
irq_exit();
}
asmlinkage void ll_local_timer_interrupt(int irq)
{
irq_enter();
if (smp_processor_id() != 0)
kstat_this_cpu.irqs[irq]++;
/* we keep interrupt disabled all the time */
local_timer_interrupt(irq, NULL);
return;
irq_exit();
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job and process
* accounting resets count/compare registers to trigger next
* timer int.
*/
timer_interrupt(irq, NULL);
} else {
/* Everyone else needs to reset the timer int here as
ll_local_timer_interrupt doesn't */
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
* counter/timer interrupts on multiple CPU's
*/
write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
/*
* Other CPUs should do profiling and process accounting
*/
local_timer_interrupt(irq, dev_id);
}
#endif /* CONFIG_MIPS_MT_SMTC */
}
/*
......
......@@ -67,108 +67,6 @@ static void mips_perf_dispatch(void)
do_IRQ(cp0_perfcount_irq);
}
/*
* Redeclare until I get around mopping the timer code insanity on MIPS.
*/
extern int null_perf_irq(void);
extern int (*perf_irq)(void);
/*
* Possibly handle a performance counter interrupt.
* Return true if the timer interrupt should not be checked
*/
static inline int handle_perf_irq (int r2)
{
/*
* The performance counter overflow interrupt may be shared with the
* timer interrupt (cp0_perfcount_irq < 0). If it is and a
* performance counter has overflowed (perf_irq() == IRQ_HANDLED)
* and we can't reliably determine if a counter interrupt has also
* happened (!r2) then don't check for a timer interrupt.
*/
return (cp0_perfcount_irq < 0) &&
perf_irq() == IRQ_HANDLED &&
!r2;
}
irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
{
int cpu = smp_processor_id();
#ifdef CONFIG_MIPS_MT_SMTC
/*
* In an SMTC system, one Count/Compare set exists per VPE.
* Which TC within a VPE gets the interrupt is essentially
* random - we only know that it shouldn't be one with
* IXMT set. Whichever TC gets the interrupt needs to
* send special interprocessor interrupts to the other
* TCs to make sure that they schedule, etc.
*
* That code is specific to the SMTC kernel, not to
* the a particular platform, so it's invoked from
* the general MIPS timer_interrupt routine.
*/
/*
* We could be here due to timer interrupt,
* perf counter overflow, or both.
*/
(void) handle_perf_irq(1);
if (read_c0_cause() & (1 << 30)) {
/*
* There are things we only want to do once per tick
* in an "MP" system. One TC of each VPE will take
* the actual timer interrupt. The others will get
* timer broadcast IPIs. We use whoever it is that takes
* the tick on VPE 0 to run the full timer_interrupt().
*/
if (cpu_data[cpu].vpe_id == 0) {
timer_interrupt(irq, NULL);
} else {
write_c0_compare(read_c0_count() +
(mips_hpt_frequency/HZ));
local_timer_interrupt(irq, dev_id);
}
smtc_timer_broadcast();
}
#else /* CONFIG_MIPS_MT_SMTC */
int r2 = cpu_has_mips_r2;
if (handle_perf_irq(r2))
goto out;
if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
goto out;
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job and process
* accounting resets count/compare registers to trigger next
* timer int.
*/
timer_interrupt(irq, NULL);
} else {
/* Everyone else needs to reset the timer int here as
ll_local_timer_interrupt doesn't */
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
* counter/timer interrupts on multiple CPU's
*/
write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
/*
* Other CPUs should do profiling and process accounting
*/
local_timer_interrupt(irq, dev_id);
}
out:
#endif /* CONFIG_MIPS_MT_SMTC */
return IRQ_HANDLED;
}
/*
* Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
*/
......@@ -246,7 +144,7 @@ void __init plat_time_init(void)
mips_scroll_message();
}
irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
{
return perf_irq();
}
......@@ -257,8 +155,10 @@ static struct irqaction perf_irqaction = {
.name = "performance",
};
void __init plat_perf_setup(struct irqaction *irq)
void __init plat_perf_setup(void)
{
struct irqaction *irq = &perf_irqaction;
cp0_perfcount_irq = -1;
#ifdef MSC01E_INT_BASE
......@@ -297,8 +197,6 @@ void __init plat_timer_setup(struct irqaction *irq)
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
/* we are using the cpu counter for timer interrupts */
irq->handler = mips_timer_interrupt; /* we use our own handler */
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
#else
......@@ -308,5 +206,5 @@ void __init plat_timer_setup(struct irqaction *irq)
set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
#endif
plat_perf_setup(&perf_irqaction);
plat_perf_setup();
}
......@@ -23,77 +23,6 @@
unsigned long cpu_khz;
irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
{
#ifdef CONFIG_SMP
int cpu = smp_processor_id();
/*
* CPU 0 handles the global timer interrupt job
* resets count/compare registers to trigger next timer int.
*/
#ifndef CONFIG_MIPS_MT_SMTC
if (cpu == 0) {
timer_interrupt(irq, dev_id);
} else {
/* Everyone else needs to reset the timer int here as
ll_local_timer_interrupt doesn't */
/*
* FIXME: need to cope with counter underflow.
* More support needs to be added to kernel/time for
* counter/timer interrupts on multiple CPU's
*/
write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
}
#else /* SMTC */
/*
* In SMTC system, one Count/Compare set exists per VPE.
* Which TC within a VPE gets the interrupt is essentially
* random - we only know that it shouldn't be one with
* IXMT set. Whichever TC gets the interrupt needs to
* send special interprocessor interrupts to the other
* TCs to make sure that they schedule, etc.
*
* That code is specific to the SMTC kernel, not to
* the simulation platform, so it's invoked from
* the general MIPS timer_interrupt routine.
*
* We have a problem in that the interrupt vector code
* had to turn off the timer IM bit to avoid redundant
* entries, but we may never get to mips_cpu_irq_end
* to turn it back on again if the scheduler gets
* involved. So we clear the pending timer here,
* and re-enable the mask...
*/
int vpflags = dvpe();
write_c0_compare (read_c0_count() - 1);
clear_c0_cause(0x100 << cp0_compare_irq);
set_c0_status(0x100 << cp0_compare_irq);
irq_enable_hazard();
evpe(vpflags);
if (cpu_data[cpu].vpe_id == 0)
timer_interrupt(irq, dev_id);
else
write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
smtc_timer_broadcast(cpu_data[cpu].vpe_id);
#endif /* CONFIG_MIPS_MT_SMTC */
/*
* every CPU should do profiling and process accounting
*/
local_timer_interrupt (irq, dev_id);
return IRQ_HANDLED;
#else
return timer_interrupt (irq, dev_id);
#endif
}
/*
* Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
*/
......@@ -185,7 +114,6 @@ void __init plat_timer_setup(struct irqaction *irq)
}
/* we are using the cpu counter for timer interrupts */
irq->handler = sim_timer_interrupt;
setup_irq(mips_cpu_timer_irq, irq);
#ifdef CONFIG_SMP
......
......@@ -20,10 +20,10 @@
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/irq_cpu.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
#include <asm/time.h>
/* #define DEBUG_SGINT */
......@@ -204,7 +204,6 @@ static struct irqaction map1_cascade = {
#define SGI_INTERRUPTS SGINT_LOCAL3
#endif
extern void indy_r4k_timer_interrupt(void);
extern void indy_8254timer_irq(void);
/*
......@@ -243,7 +242,7 @@ asmlinkage void plat_irq_dispatch(void)
* First we check for r4k counter/timer IRQ.
*/
if (pending & CAUSEF_IP7)
indy_r4k_timer_interrupt();
ll_timer_interrupt(SGI_TIMER_IRQ, NULL);
else if (pending & CAUSEF_IP2)
indy_local0_irqdispatch();
else if (pending & CAUSEF_IP3)
......
......@@ -189,16 +189,6 @@ void indy_8254timer_irq(void)
irq_exit();
}
void indy_r4k_timer_interrupt(void)
{
int irq = SGI_TIMER_IRQ;
irq_enter();
kstat_this_cpu.irqs[irq]++;
timer_interrupt(irq, NULL);
irq_exit();
}
void __init plat_timer_setup(struct irqaction *irq)
{
/* over-write the handler, we use our own way */
......
......@@ -103,18 +103,7 @@ void bcm1480_timer_interrupt(void)
__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job
*/
ll_timer_interrupt(irq);
}
else {
/*
* other CPUs should just do profiling and process accounting
*/
ll_local_timer_interrupt(irq);
}
ll_timer_interrupt(irq);
}
static cycle_t bcm1480_hpt_read(void)
......
......@@ -125,18 +125,7 @@ void sb1250_timer_interrupt(void)
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
if (cpu == 0) {
/*
* CPU 0 handles the global timer interrupt job
*/
ll_timer_interrupt(irq);
}
else {
/*
* other CPUs should just do profiling and process accounting
*/
ll_local_timer_interrupt(irq);
}
ll_timer_interrupt(irq);
}
/*
......
......@@ -49,20 +49,14 @@ extern void (*mips_timer_ack)(void);
extern struct clocksource clocksource_mips;
/*
* high-level timer interrupt routines.
* The low-level timer interrupt routine.
*/
extern irqreturn_t timer_interrupt(int irq, void *dev_id);
/*
* the corresponding low-level timer interrupt routine.
*/
extern asmlinkage void ll_timer_interrupt(int irq);
extern void ll_timer_interrupt(int irq, void *dev_id);
/*
* profiling and process accouting is done separately in local_timer_interrupt
*/
extern void local_timer_interrupt(int irq, void *dev_id);
extern asmlinkage void ll_local_timer_interrupt(int irq);
/*
* board specific routines required by time_init().
......@@ -78,4 +72,10 @@ extern void plat_timer_setup(struct irqaction *irq);
*/
extern unsigned int mips_hpt_frequency;
/*
* The performance counter IRQ on MIPS is a close relative to the timer IRQ
* so it lives here.
*/
extern int (*perf_irq)(void);
#endif /* _ASM_TIME_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment