Commit 91a55d4f authored by Boris BREZILLON's avatar Boris BREZILLON Committed by Nicolas Ferre

ARM: at91: introduce OLD_IRQ_AT91 Kconfig option

Introduce the OLD_IRQ_AT91 Kconfig option to prepare migration to the
new AIC driver.

Select this option for all at91 SoCs and all available boards so that we
can later move DT enabled boards to the new irq driver and keep the old
implementation when legacy boards are selected.
Signed-off-by: default avatarBoris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 7d1311b9
......@@ -28,6 +28,11 @@ config OLD_CLK_AT91
bool
default AT91_PMC_UNIT && AT91_USE_OLD_CLK
config OLD_IRQ_AT91
bool
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
......@@ -47,16 +52,12 @@ config SOC_AT91SAM9
select AT91_SAM9_TIME
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
config SOC_SAMA5
bool
select AT91_SAM9_TIME
select CPU_V7
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
menu "Atmel AT91 System-on-Chip"
......@@ -70,8 +71,7 @@ config ARCH_AT91X40
depends on !MMU
select CPU_ARM7TDMI
select ARCH_USES_GETTIMEOFFSET
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select OLD_IRQ_AT91
help
Select this if you are using one of Atmel's AT91X40 SoC.
......@@ -111,8 +111,6 @@ config SOC_AT91RM9200
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
......@@ -195,6 +193,7 @@ comment "Generic Board Type"
config MACH_AT91RM9200_DT
bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
depends on SOC_AT91RM9200
select OLD_IRQ_AT91
select USE_OF
help
Select this if you want to experiment device-tree with
......@@ -203,6 +202,7 @@ config MACH_AT91RM9200_DT
config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select OLD_IRQ_AT91
select USE_OF
help
Select this if you want to experiment device-tree with
......@@ -211,6 +211,7 @@ config MACH_AT91SAM9_DT
config MACH_SAMA5_DT
bool "Atmel SAMA5 Evaluation Kits with device-tree support"
depends on SOC_SAMA5
select OLD_IRQ_AT91
select USE_OF
select PHYLIB if NETDEVICES
help
......
......@@ -14,31 +14,37 @@ config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9260
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9261
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
select AT91_USE_OLD_CLK
select OLD_IRQ_AT91
endchoice
......
......@@ -2,11 +2,12 @@
# Makefile for the linux kernel.
#
obj-y := irq.o gpio.o setup.o sysirq_mask.o
obj-y := gpio.o setup.o sysirq_mask.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_OLD_IRQ_AT91) += irq.o
obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment