Commit 91c02557 authored by Pavel Skripkin's avatar Pavel Skripkin Committed by Marc Kleine-Budde

can: mcba_usb: fix memory leak in mcba_usb

Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.

In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:

1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
   is not set (see mcba_usb_start) and this flag cannot be used with
   coherent buffers.

Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem)

So, all allocated buffers should be freed with usb_free_coherent()
explicitly

NOTE:
The same pattern for allocating and freeing coherent buffers
is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com
Signed-off-by: default avatarPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 5e87ddbe
......@@ -82,6 +82,8 @@ struct mcba_priv {
bool can_ka_first_pass;
bool can_speed_check;
atomic_t free_ctx_cnt;
void *rxbuf[MCBA_MAX_RX_URBS];
dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
};
/* CAN frame */
......@@ -633,6 +635,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf;
dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
......@@ -642,7 +645,7 @@ static int mcba_usb_start(struct mcba_priv *priv)
}
buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
GFP_KERNEL, &urb->transfer_dma);
GFP_KERNEL, &buf_dma);
if (!buf) {
netdev_err(netdev, "No memory left for USB buffer\n");
usb_free_urb(urb);
......@@ -661,11 +664,14 @@ static int mcba_usb_start(struct mcba_priv *priv)
if (err) {
usb_unanchor_urb(urb);
usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
buf, urb->transfer_dma);
buf, buf_dma);
usb_free_urb(urb);
break;
}
priv->rxbuf[i] = buf;
priv->rxbuf_dma[i] = buf_dma;
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
}
......@@ -708,7 +714,14 @@ static int mcba_usb_open(struct net_device *netdev)
static void mcba_urb_unlink(struct mcba_priv *priv)
{
int i;
usb_kill_anchored_urbs(&priv->rx_submitted);
for (i = 0; i < MCBA_MAX_RX_URBS; ++i)
usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
priv->rxbuf[i], priv->rxbuf_dma[i]);
usb_kill_anchored_urbs(&priv->tx_submitted);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment