Commit 91c6c8dc authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A range of ARM fixes.  Biggest change is the stage-2 attributes used
  for for hyp mode which were wrong.  I've killed some bits in a couple
  of DT files which turned out not to be required, and a few other
  fixes.

  One fix touches code outside of arch/arm, which is related to sorting
  out the DMA masks correctly.  There is a long standing issue with the
  conversion from PFNs to addresses where people assume that shifting an
  unsigned long left by PAGE_SHIFT results in a correct address.  This
  is not the case with C: the integer promotion happens at assignment
  after evaluation.  This fixes the recently introduced dma_max_pfn()
  function, but there's a number of other places where we try this
  directly on an unsigned long in the mm code"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
  Fix uses of dma_max_pfn() when converting to a limiting address
  ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
  ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
  ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
  ARM: 7950/1: mm: Fix stage-2 device memory attributes
  ARM: dts: fix spdif pinmux configuration
parents 341bbdc5 39544ac9
......@@ -52,12 +52,6 @@ reg_usbotg_vbus: usb-otg-vbus {
};
};
codec: spdif-transmitter {
compatible = "linux,spdif-dit";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
......@@ -111,7 +105,7 @@ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
};
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
......@@ -142,6 +136,8 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
......
......@@ -46,12 +46,6 @@ reg_usbotg_vbus: usb-otg-vbus {
};
};
codec: spdif-transmitter {
compatible = "linux,spdif-dit";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
......@@ -89,7 +83,7 @@ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
};
pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
......@@ -121,6 +115,8 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
status = "okay";
};
......
......@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
static inline void __flush_icache_all(void)
{
__flush_icache_preferred();
dsb();
}
/*
......
......@@ -120,13 +120,16 @@
/*
* 2nd stage PTE definitions for LPAE.
*/
#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */
#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */
#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2)
#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
/*
* Hyp-mode PL2 PTE definitions for LPAE.
......
......@@ -37,18 +37,9 @@
static inline void dsb_sev(void)
{
#if __LINUX_ARM_ARCH__ >= 7
__asm__ __volatile__ (
"dsb ishst\n"
SEV
);
#else
__asm__ __volatile__ (
"mcr p15, 0, %0, c7, c10, 4\n"
SEV
: : "r" (0)
);
#endif
dsb(ishst);
__asm__(SEV);
}
/*
......
......@@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
kernel_data.end = virt_to_phys(_end - 1);
for_each_memblock(memory, region) {
res = memblock_virt_alloc_low(sizeof(*res), 0);
res = memblock_virt_alloc(sizeof(*res), 0);
res->name = "System RAM";
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
......
......@@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
struct mem_type {
pteval_t prot_pte;
pteval_t prot_pte_s2;
pmdval_t prot_l1;
pmdval_t prot_sect;
unsigned int domain;
......
......@@ -232,12 +232,16 @@ __setup("noalign", noalign_setup);
#endif /* ifdef CONFIG_CPU_CP15 / else */
#define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE
#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
static struct mem_type mem_types[] = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
L_PTE_SHARED,
.prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) |
s2_policy(L_PTE_S2_MT_DEV_SHARED) |
L_PTE_SHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_S,
.domain = DOMAIN_IO,
......@@ -508,7 +512,8 @@ static void __init build_mem_type_table(void)
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
s2_pgprot = cp->pte_s2;
hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte;
s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
/*
* ARMv6 and above have extended page tables.
......
......@@ -208,7 +208,6 @@ __v6_setup:
mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
......@@ -218,6 +217,8 @@ __v6_setup:
ALT_UP(orr r8, r8, #TTB_FLAGS_UP)
mcr p15, 0, r8, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer and
@ complete invalidations
adr r5, v6_crval
ldmia r5, {r5, r6}
ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
......
......@@ -351,7 +351,6 @@ __v7_setup:
4: mov r10, #0
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
dsb
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup
......@@ -360,6 +359,7 @@ __v7_setup:
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
dsb @ Complete invalidations
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
......
......@@ -197,7 +197,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
struct mmc_queue_req *mqrq_prev = &mq->mqrq[1];
if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
limit = dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
mq->card = card;
mq->queue = blk_init_queue(mmc_request_fn, lock);
......
......@@ -1684,7 +1684,7 @@ u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
host_dev = scsi_get_device(shost);
if (host_dev && host_dev->dma_mask)
bounce_limit = dma_max_pfn(host_dev) << PAGE_SHIFT;
bounce_limit = (u64)dma_max_pfn(host_dev) << PAGE_SHIFT;
return bounce_limit;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment