Skip to content

L
linux
Commit 9208c19f authored by Bjorn Andersson's avatar Bjorn Andersson
Browse files
Options

arm64: dts: qcom: Introduce SM8350 HDK 

Add initial DTS for the Snapdragon 888 Mobile Hardware Development Kit,
aka SM8350 HDK. This initial version describes debug UART, UFS storage,
the three USB connectors and remoteprocs.
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210308182113.1284966-1-bjorn.andersson@linaro.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 9ad3c08f
Show whitespace changes
Inline Side-by-side
Showing with 320 additions and 0 deletions
arch/arm64/boot/dts/qcom/Makefile
View file @ 9208c19f
...@@ -70,4 +70,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb ...@@ -70,4 +70,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
arch/arm64/boot/dts/qcom/sm8350-hdk.dts 0 → 100644
View file @ 9208c19f
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020-2021, Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8350.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8350 HDK";
compatible = "qcom,sm8350-hdk", "qcom,sm8350";
aliases {
serial0 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&adsp {
status = "okay";
firmware-name = "qcom/sm8350/adsp.mbn";
};
&apps_rsc {
pm8350-rpmh-regulators {
compatible = "qcom,pm8350-rpmh-regulators";
qcom,pmic-id = "b";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-s11-supply = <&vph_pwr>;
vdd-s12-supply = <&vph_pwr>;
vdd-l1-l4-supply = <&vreg_s11b_0p95>;
vdd-l2-l7-supply = <&vreg_bob>;
vdd-l3-l5-supply = <&vreg_bob>;
vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
vreg_s10b_1p8: smps10 {
regulator-name = "vreg_s10b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s11b_0p95: smps11 {
regulator-name = "vreg_s11b_0p95";
regulator-min-microvolt = <952000>;
regulator-max-microvolt = <952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s12b_1p25: smps12 {
regulator-name = "vreg_s12b_1p25";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1b_0p88: ldo1 {
regulator-name = "vreg_l1b_0p88";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p07: ldo2 {
regulator-name = "vreg_l2b_3p07";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b_0p9: ldo3 {
regulator-name = "vreg_l3b_0p9";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_0p88: ldo5 {
regulator-name = "vreg_l5b_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <888000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l6b_1p2: ldo6 {
regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1208000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l7b_2p96: ldo7 {
regulator-name = "vreg_l7b_2p96";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
vreg_l9b_1p2: ldo9 {
regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
};
};
pm8350c-rpmh-regulators {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-l1-l12-supply = <&vreg_s1c_1p86>;
vdd-l2-l8-supply = <&vreg_s1c_1p86>;
vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
vdd-l6-l9-l11-supply = <&vreg_bob>;
vdd-l10-supply = <&vreg_s12b_1p25>;
vdd-bob-supply = <&vph_pwr>;
vreg_s1c_1p86: smps1 {
regulator-name = "vreg_s1c_1p86";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <1880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
vreg_l1c_1p8: ldo1 {
regulator-name = "vreg_l1c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p8: ldo2 {
regulator-name = "vreg_l2c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c_1p8: ldo6 {
regulator-name = "vreg_l6c_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p96: ldo9 {
regulator-name = "vreg_l9c_2p96";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_1p2: ldo10 {
regulator-name = "vreg_l10c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&cdsp {
status = "okay";
firmware-name = "qcom/sm8350/cdsp.mbn";
};
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/modem.mbn";
};
&qupv3_id_1 {
status = "okay";
};
&slpi {
status = "okay";
firmware-name = "qcom/sm8350/slpi.mbn";
};
&tlmm {
gpio-reserved-ranges = <52 8>;
};
&uart2 {
status = "okay";
};
&ufs_mem_hc {
status = "okay";
reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l7b_2p96>;
vcc-max-microamp = <800000>;
vccq-supply = <&vreg_l9b_1p2>;
vccq-max-microamp = <900000>;
};
&ufs_mem_phy {
status = "okay";
vdda-phy-supply = <&vreg_l5b_0p88>;
vdda-max-microamp = <91600>;
vdda-pll-supply = <&vreg_l6b_1p2>;
vdda-pll-max-microamp = <19000>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
/* TODO: Define USB-C connector properly */
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5b_0p88>;
vdda18-supply = <&vreg_l1c_1p8>;
vdda33-supply = <&vreg_l2b_3p07>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p88>;
};
&usb_2 {
status = "okay";
};
&usb_2_dwc3 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb_hub_enabled_state>;
};
&usb_2_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l5b_0p88>;
vdda18-supply = <&vreg_l1c_1p8>;
vdda33-supply = <&vreg_l2b_3p07>;
};
&usb_2_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l5b_0p88>;
};
/* PINCTRL - additions to nodes defined in sm8350.dtsi */
&tlmm {
usb_hub_enabled_state: usb-hub-enabled-state {
pins = "gpio42";
function = "gpio";
drive-strength = <2>;
output-low;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7