usb: dwc2: gadget: Add dwc2_gadget_incr_frame_num()

Increases and checks targeted frame number of current ep
if overrun happened, sets flag and masks with DSTS_SOFFN_LIMIT

Added following fields to struct dwc2_hsotg_ep
-target_frame: Targeted frame num to setup next ISOC transfer
-frame_overrun: Indicates SOF number overrun in DSTS
Tested-by: John Keeping <john@metanate.com>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc2/core.h

@@ -177,6 +177,8 @@ struct dwc2_hsotg_req;
  * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
  * @last_load: The offset of data for the last start of request.
  * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ * @target_frame: Targeted frame num to setup next ISOC transfer
+ * @frame_overrun: Indicates SOF number overrun in DSTS
  *
  * This is the driver's state for each registered enpoint, allowing it
  * to keep track of transactions that need doing. Each endpoint has a
@@ -214,6 +216,9 @@ struct dwc2_hsotg_ep {
 	unsigned int            isochronous:1;
 	unsigned int            send_zlp:1;
 	unsigned int            has_correct_parity:1;
+	unsigned int            target_frame;
+#define TARGET_FRAME_INITIAL   0xFFFFFFFF
+	bool			frame_overrun;
 
 	char                    name[10];
 };

drivers/usb/dwc2/gadget.c

@@ -96,6 +96,25 @@ static inline bool using_dma(struct dwc2_hsotg *hsotg)
 	return hsotg->g_using_dma;
 }
 
+/**
+ * dwc2_gadget_incr_frame_num - Increments the targeted frame number.
+ * @hs_ep: The endpoint
+ * @increment: The value to increment by
+ *
+ * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT.
+ * If an overrun occurs it will wrap the value and set the frame_overrun flag.
+ */
+static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
+{
+	hs_ep->target_frame += hs_ep->interval;
+	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+		hs_ep->frame_overrun = 1;
+		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+	} else {
+		hs_ep->frame_overrun = 0;
+	}
+}
+
 /**
  * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
  * @hsotg: The device state