Merge tag 'dt-fixes-for-palmer-6.0-rc3' of...

Merge tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes

Microchip RISC-V devicetree fixes for 6.0-rc3

Two sets of fixes this time around:
- A fix for the interrupt ordering of the l2-cache controller. If the
  driver is enabled, it would spam the console /constantly/, rendering
  the system useless.
- General cleanup for some bogus properties in the dt, part of my quest
  for zero dtbs_check warnings.

On that note, the interrupt ordering adds a dtbs_check warning - but I
considered that fixing the potentially useless system was more of a
priority.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git:
  riscv: dts: microchip: mpfs: remove pci axi address translation property
  riscv: dts: microchip: mpfs: remove bogus card-detect-delay
  riscv: dts: microchip: mpfs: remove ti,fifo-depth property
  riscv: dts: microchip: mpfs: fix incorrect pcie child node name
  riscv: dts: microchip: correct L2 cache interrupts

arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts

@@ -84,12 +84,10 @@ &mac1 {
 
 	phy1: ethernet-phy@9 {
 		reg = <9>;
-		ti,fifo-depth = <0x1>;
 	};
 
 	phy0: ethernet-phy@8 {
 		reg = <8>;
-		ti,fifo-depth = <0x1>;
 	};
 };
 
@@ -102,7 +100,6 @@ &mmc {
 	disable-wp;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
-	card-detect-delay = <200>;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	sd-uhs-sdr12;

arch/riscv/boot/dts/microchip/mpfs-polarberry.dts

@@ -54,12 +54,10 @@ &mac1 {
 
 	phy1: ethernet-phy@5 {
 		reg = <5>;
-		ti,fifo-depth = <0x01>;
 	};
 
 	phy0: ethernet-phy@4 {
 		reg = <4>;
-		ti,fifo-depth = <0x01>;
 	};
 };
 
@@ -72,7 +70,6 @@ &mmc {
 	disable-wp;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
-	card-detect-delay = <200>;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	sd-uhs-sdr12;

arch/riscv/boot/dts/microchip/mpfs.dtsi

@@ -193,7 +193,7 @@ cctrllr: cache-controller@2010000 {
 			cache-size = <2097152>;
 			cache-unified;
 			interrupt-parent = <&plic>;
-			interrupts = <1>, <2>, <3>;
+			interrupts = <1>, <3>, <4>, <2>;
 		};
 
 		clint: clint@2000000 {
@@ -485,9 +485,8 @@ pcie: pcie@2000000000 {
 			ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
 			msi-parent = <&pcie>;
 			msi-controller;
-			microchip,axi-m-atr0 = <0x10 0x0>;
 			status = "disabled";
-			pcie_intc: legacy-interrupt-controller {
+			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				interrupt-controller;