media: dt-bindings: ov8856: Document YAML bindings

This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Documentation/devicetree/bindings/media/i2c/ov8856.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface. This chip is programmable
+  through I2C and two-wire SCCB. The sensor output is available via CSI-2
+  serial data output (up to 4-lane).
+
+properties:
+  compatible:
+    const: ovti,ov8856
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  port:
+    type: object
+    additionalProperties: false
+    description:
+      A node containing an output port node with an endpoint definition
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          data-lanes:
+            description: |-
+              The driver only supports four-lane operation.
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          link-frequencies:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint64-array
+            description:
+              Allowed data bus frequencies. 360000000, 180000000 Hz or both
+              are supported by the driver.
+
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8856: camera@10 {
+            compatible = "ovti,ov8856";
+            reg = <0x10>;
+
+            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cam_osc>;
+            clock-names = "xvclk";
+            clock-frequency = <19200000>;
+
+            avdd-supply = <&mt6358_vcama2_reg>;
+            dvdd-supply = <&mt6358_vcamd_reg>;
+            dovdd-supply = <&mt6358_vcamio_reg>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
\ No newline at end of file

MAINTAINERS

@@ -12485,10 +12485,11 @@ F:	Documentation/devicetree/bindings/media/i2c/ov7740.txt
 F:	drivers/media/i2c/ov7740.c
 
 OMNIVISION OV8856 SENSOR DRIVER
-M:	Ben Kao <ben.kao@intel.com>
+M:	Dongchun Zhu <dongchun.zhu@mediatek.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ov8856.yaml
 F:	drivers/media/i2c/ov8856.c
 
 OMNIVISION OV9640 SENSOR DRIVER