Merge branch 'axienet-broken-link'

Andy Chiu says:

====================
Fix broken link on Xilinx's AXI Ethernet in SGMII mode

The Ethernet driver use phy-handle to reference the PCS/PMA PHY. This
could be a problem if one wants to configure an external PHY via phylink,
since it use the same phandle to get the PHY. To fix this, introduce a
dedicated pcs-handle to point to the PCS/PMA PHY and deprecate the use
of pointing it with phy-handle. A similar use case of pcs-handle can be
seen on dpaa2 as well.

--- patch v5 ---
 - Re-apply the v4 patch on the net tree.
 - Describe the pcs-handle DT binding at ethernet-controller level.
--- patch v6 ---
 - Remove "preferrably" to clearify usage of pcs_handle.
--- patch v7 ---
 - Rebase the patch on latest net/master
--- patch v8 ---
 - Rebase the patch on net-next/master
 - Add "reviewed-by" tag in PATCH 3/4: dt-bindings: net: add pcs-handle
   attribute
 - Remove "fix" tag in last commit message since this is not a critical
   bug and will not be back ported to stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -106,6 +106,12 @@ properties:
   phy-mode:
     $ref: "#/properties/phy-connection-type"
 
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PCS PHY device on a MDIO
+      bus to link with an external PHY (phy-handle) if exists.
+
   phy-handle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:

Documentation/devicetree/bindings/net/xilinx_axienet.txt

@@ -26,7 +26,8 @@ Required properties:
 		  specified, the TX/RX DMA interrupts should be on that node
 		  instead, and only the Ethernet core interrupt is optionally
 		  specified here.
-- phy-handle	: Should point to the external phy device.
+- phy-handle	: Should point to the external phy device if exists. Pointing
+		  this to the PCS/PMA PHY is deprecated and should be avoided.
 		  See ethernet.txt file in the same directory.
 - xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
 
@@ -68,6 +69,11 @@ Optional properties:
 		  required through the core's MDIO interface (i.e. always,
 		  unless the PHY is accessed through a different bus).
 
+ - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+		  modes, where "pcs-handle" should be used to point
+		  to the PCS/PMA PHY, and "phy-handle" should point to an
+		  external PHY if exists.
+
 Example:
 	axi_ethernet_eth: ethernet@40c00000 {
 		compatible = "xlnx,axi-ethernet-1.00.a";

drivers/net/ethernet/xilinx/xilinx_axienet.h

@@ -433,8 +433,6 @@ struct axienet_local {
 	struct net_device *ndev;
 	struct device *dev;
 
-	struct device_node *phy_node;
-
 	struct phylink *phylink;
 	struct phylink_config phylink_config;
 

drivers/net/ethernet/xilinx/xilinx_axienet_main.c

@@ -2064,25 +2064,33 @@ static int axienet_probe(struct platform_device *pdev)
 	if (ret)
 		goto cleanup_clk;
 
-	lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
-	if (lp->phy_node) {
-		ret = axienet_mdio_setup(lp);
-		if (ret)
-			dev_warn(&pdev->dev,
-				 "error registering MDIO bus: %d\n", ret);
-	}
+	ret = axienet_mdio_setup(lp);
+	if (ret)
+		dev_warn(&pdev->dev,
+			 "error registering MDIO bus: %d\n", ret);
+
 	if (lp->phy_mode == PHY_INTERFACE_MODE_SGMII ||
 	    lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) {
-		if (!lp->phy_node) {
-			dev_err(&pdev->dev, "phy-handle required for 1000BaseX/SGMII\n");
+		np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
+		if (!np) {
+			/* Deprecated: Always use "pcs-handle" for pcs_phy.
+			 * Falling back to "phy-handle" here is only for
+			 * backward compatibility with old device trees.
+			 */
+			np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
+		}
+		if (!np) {
+			dev_err(&pdev->dev, "pcs-handle (preferred) or phy-handle required for 1000BaseX/SGMII\n");
 			ret = -EINVAL;
 			goto cleanup_mdio;
 		}
-		lp->pcs_phy = of_mdio_find_device(lp->phy_node);
+		lp->pcs_phy = of_mdio_find_device(np);
 		if (!lp->pcs_phy) {
 			ret = -EPROBE_DEFER;
+			of_node_put(np);
 			goto cleanup_mdio;
 		}
+		of_node_put(np);
 		lp->pcs.ops = &axienet_pcs_ops;
 		lp->pcs.poll = true;
 	}
@@ -2125,8 +2133,6 @@ static int axienet_probe(struct platform_device *pdev)
 		put_device(&lp->pcs_phy->dev);
 	if (lp->mii_bus)
 		axienet_mdio_teardown(lp);
-	of_node_put(lp->phy_node);
-
 cleanup_clk:
 	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
 	clk_disable_unprepare(lp->axi_clk);
@@ -2155,9 +2161,6 @@ static int axienet_remove(struct platform_device *pdev)
 	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
 	clk_disable_unprepare(lp->axi_clk);
 
-	of_node_put(lp->phy_node);
-	lp->phy_node = NULL;
-
 	free_netdev(ndev);
 
 	return 0;