[SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxx

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_els.c

@@ -230,27 +230,43 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
 
 	INIT_LIST_HEAD(&pbuflist->list);
 
-	icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
-	icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
-	icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
-	icmd->un.elsreq64.remoteID = did;	/* DID */
 	if (expectRsp) {
+		icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
+		icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
+		icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
 		icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+
+		icmd->un.elsreq64.remoteID = did;		/* DID */
 		icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
 		icmd->ulpTimeout = phba->fc_ratov * 2;
 	} else {
-		icmd->un.elsreq64.bdl.bdeSize = sizeof(struct ulp_bde64);
+		icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
+		icmd->un.xseq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
+		icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+		icmd->un.xseq64.bdl.bdeSize = sizeof(struct ulp_bde64);
+		icmd->un.xseq64.xmit_els_remoteID = did;	/* DID */
 		icmd->ulpCommand = CMD_XMIT_ELS_RSP64_CX;
 	}
 	icmd->ulpBdeCount = 1;
 	icmd->ulpLe = 1;
 	icmd->ulpClass = CLASS3;
 
-	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
-		icmd->un.elsreq64.myID = vport->fc_myDID;
+	/*
+	 * If we have NPIV enabled, we want to send ELS traffic by VPI.
+	 * For SLI4, since the driver controls VPIs we also want to include
+	 * all ELS pt2pt protocol traffic as well.
+	 */
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) ||
+		((phba->sli_rev == LPFC_SLI_REV4) &&
+		    (vport->fc_flag & FC_PT2PT))) {
+
+		if (expectRsp) {
+			icmd->un.elsreq64.myID = vport->fc_myDID;
+
+			/* For ELS_REQUEST64_CR, use the VPI by default */
+			icmd->ulpContext = phba->vpi_ids[vport->vpi];
+		}
 
-		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = phba->vpi_ids[vport->vpi];
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)
@@ -438,9 +454,10 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport)
 	int rc = 0;
 
 	sp = &phba->fc_fabparam;
-	/* move forward in case of SLI4 FC port loopback test */
+	/* move forward in case of SLI4 FC port loopback test and pt2pt mode */
 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
-	    !(phba->link_flag & LS_LOOPBACK_MODE)) {
+	    !(phba->link_flag & LS_LOOPBACK_MODE) &&
+	    !(vport->fc_flag & FC_PT2PT)) {
 		ndlp = lpfc_findnode_did(vport, Fabric_DID);
 		if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
 			rc = -ENODEV;
@@ -820,6 +837,17 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			mempool_free(mbox, phba->mbox_mem_pool);
 			goto fail;
 		}
+
+		/*
+		 * For SLI4, the VFI/VPI are registered AFTER the
+		 * Nport with the higher WWPN sends the PLOGI with
+		 * an assigned NPortId.
+		 */
+
+		/* not equal */
+		if ((phba->sli_rev == LPFC_SLI_REV4) && rc)
+			lpfc_issue_reg_vfi(vport);
+
 		/* Decrement ndlp reference count indicating that ndlp can be
 		 * safely released when other references to it are done.
 		 */
@@ -4940,8 +4968,6 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		return 1;
 	}
 
-	did = Fabric_DID;
-
 	if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1))) {
 		/* For a FLOGI we accept, then if our portname is greater
 		 * then the remote portname we initiate Nport login.
@@ -4980,29 +5006,64 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 			spin_lock_irq(shost->host_lock);
 			vport->fc_flag |= FC_PT2PT_PLOGI;
 			spin_unlock_irq(shost->host_lock);
+
+			/* If we have the high WWPN we can assign our own
+			 * myDID; otherwise, we have to WAIT for a PLOGI
+			 * from the remote NPort to find out what it
+			 * will be.
+			 */
 			vport->fc_myDID = PT2PT_LocalID;
-		} else
-			vport->fc_myDID = PT2PT_RemoteID;
-		vport->port_state = LPFC_FLOGI;
+		}
+
+		/*
+		 * The vport state should go to LPFC_FLOGI only
+		 * AFTER we issue a FLOGI, not receive one.
+		 */
 		spin_lock_irq(shost->host_lock);
 		vport->fc_flag |= FC_PT2PT;
 		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
 		spin_unlock_irq(shost->host_lock);
+
+		/*
+		 * We temporarily set fc_myDID to make it look like we are
+		 * a Fabric. This is done just so we end up with the right
+		 * did / sid on the FLOGI ACC rsp.
+		 */
+		did = vport->fc_myDID;
+		vport->fc_myDID = Fabric_DID;
+
 	} else {
 		/* Reject this request because invalid parameters */
 		stat.un.b.lsRjtRsvd0 = 0;
 		stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
 		stat.un.b.lsRjtRsnCodeExp = LSEXP_SPARM_OPTIONS;
 		stat.un.b.vendorUnique = 0;
+
+		/*
+		 * We temporarily set fc_myDID to make it look like we are
+		 * a Fabric. This is done just so we end up with the right
+		 * did / sid on the FLOGI LS_RJT rsp.
+		 */
+		did = vport->fc_myDID;
+		vport->fc_myDID = Fabric_DID;
+
 		lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
 			NULL);
+
+		/* Now lets put fc_myDID back to what its supposed to be */
+		vport->fc_myDID = did;
+
 		return 1;
 	}
 
 	/* Send back ACC */
 	lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);
 
+	/* Now lets put fc_myDID back to what its supposed to be */
+	vport->fc_myDID = did;
+
 	if (!(vport->fc_flag & FC_PT2PT_PLOGI)) {
+
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (!mbox)
 			goto fail;

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -2882,9 +2882,14 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	}
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
-		/* For private loop just start discovery and we are done. */
-		if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
-		    !(vport->fc_flag & FC_PUBLIC_LOOP)) {
+		/*
+		 * For private loop or for NPort pt2pt,
+		 * just start discovery and we are done.
+		 */
+		if ((vport->fc_flag & FC_PT2PT) ||
+		    ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
+		    !(vport->fc_flag & FC_PUBLIC_LOOP))) {
+
 			/* Use loop map to make discovery list */
 			lpfc_disc_list_loopmap(vport);
 			/* Start discovery */
@@ -5491,9 +5496,9 @@ lpfc_nlp_release(struct kref *kref)
 		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
 
 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
-			"0279 lpfc_nlp_release: ndlp:x%p "
+			"0279 lpfc_nlp_release: ndlp:x%p did %x "
 			"usgmap:x%x refcnt:%d\n",
-			(void *)ndlp, ndlp->nlp_usg_map,
+			(void *)ndlp, ndlp->nlp_DID, ndlp->nlp_usg_map,
 			atomic_read(&ndlp->kref.refcount));
 
 	/* remove ndlp from action. */

drivers/scsi/lpfc/lpfc_hw.h

@@ -3374,6 +3374,9 @@ typedef struct {
 	WORD5 w5;		/* Header control/status word */
 } XMT_SEQ_FIELDS64;
 
+/* This word is remote ports D_ID for XMIT_ELS_RSP64 */
+#define xmit_els_remoteID xrsqRo
+
 /* IOCB Command template for 64 bit RCV_SEQUENCE64 */
 typedef struct {
 	struct ulp_bde64 rcvBde;

drivers/scsi/lpfc/lpfc_hw4.h

@@ -3295,7 +3295,13 @@ struct els_request64_wqe {
 struct xmit_els_rsp64_wqe {
 	struct ulp_bde64 bde;
 	uint32_t response_payload_len;
-	uint32_t rsvd4;
+	uint32_t word4;
+#define els_rsp64_sid_SHIFT         0
+#define els_rsp64_sid_MASK          0x00FFFFFF
+#define els_rsp64_sid_WORD          word4
+#define els_rsp64_sp_SHIFT          24
+#define els_rsp64_sp_MASK           0x00000001
+#define els_rsp64_sp_WORD           word4
 	struct wqe_did wqe_dest;
 	struct wqe_common wqe_com; /* words 6-11 */
 	uint32_t word12;

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -367,8 +367,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		return 1;
 	}
 
+	/* Check for Nport to NPort pt2pt protocol */
 	if ((vport->fc_flag & FC_PT2PT) &&
 	    !(vport->fc_flag & FC_PT2PT_PLOGI)) {
+
 		/* rcv'ed PLOGI decides what our NPortId will be */
 		vport->fc_myDID = icmd->un.rcvels.parmRo;
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -382,6 +384,13 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			mempool_free(mbox, phba->mbox_mem_pool);
 			goto out;
 		}
+		/*
+		 * For SLI4, the VFI/VPI are registered AFTER the
+		 * Nport with the higher WWPN sends us a PLOGI with
+		 * our assigned NPortId.
+		 */
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			lpfc_issue_reg_vfi(vport);
 
 		lpfc_can_disctmo(vport);
 	}

drivers/scsi/lpfc/lpfc_sli.c

@@ -7907,6 +7907,10 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 				bf_set(els_req64_sp, &wqe->els_req, 1);
 				bf_set(els_req64_sid, &wqe->els_req,
 					iocbq->vport->fc_myDID);
+				if ((*pcmd == ELS_CMD_FLOGI) &&
+					!(phba->fc_topology ==
+						LPFC_TOPOLOGY_LOOP))
+					bf_set(els_req64_sid, &wqe->els_req, 0);
 				bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
 				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
 					phba->vpi_ids[iocbq->vport->vpi]);
@@ -8064,11 +8068,25 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		/* words0-2 BDE memcpy */
 		/* word3 iocb=iotag32 wqe=response_payload_len */
 		wqe->xmit_els_rsp.response_payload_len = xmit_len;
-		/* word4 iocb=did wge=rsvd. */
-		wqe->xmit_els_rsp.rsvd4 = 0;
+		/* word4 */
+		wqe->xmit_els_rsp.word4 = 0;
 		/* word5 iocb=rsvd wge=did */
 		bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
-			 iocbq->iocb.un.elsreq64.remoteID);
+			 iocbq->iocb.un.xseq64.xmit_els_remoteID);
+
+		if_type = bf_get(lpfc_sli_intf_if_type,
+					&phba->sli4_hba.sli_intf);
+		if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+			if (iocbq->vport->fc_flag & FC_PT2PT) {
+				bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+				bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
+					iocbq->vport->fc_myDID);
+				if (iocbq->vport->fc_myDID == Fabric_DID) {
+					bf_set(wqe_els_did,
+						&wqe->xmit_els_rsp.wqe_dest, 0);
+				}
+			}
+		}
 		bf_set(wqe_ct, &wqe->xmit_els_rsp.wqe_com,
 		       ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
 		bf_set(wqe_pu, &wqe->xmit_els_rsp.wqe_com, iocbq->iocb.ulpPU);
@@ -8088,11 +8106,11 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
 					iocbq->context2)->virt);
 		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
-				bf_set(els_req64_sp, &wqe->els_req, 1);
-				bf_set(els_req64_sid, &wqe->els_req,
+				bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+				bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
 					iocbq->vport->fc_myDID);
-				bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
-				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
+				bf_set(wqe_ct, &wqe->xmit_els_rsp.wqe_com, 1);
+				bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com,
 					phba->vpi_ids[phba->pport->vpi]);
 		}
 		command_type = OTHER_COMMAND;
@@ -13636,8 +13654,13 @@ lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
 	uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
 			fc_hdr->fh_d_id[1] << 8 |
 			fc_hdr->fh_d_id[2]);
+
 	if (did == Fabric_DID)
 		return phba->pport;
+	if ((phba->pport->fc_flag & FC_PT2PT) &&
+		!(phba->link_state == LPFC_HBA_READY))
+		return phba->pport;
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
 		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
@@ -14174,7 +14197,15 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 		/* Initialize the first IOCB. */
 		first_iocbq->iocb.unsli3.rcvsli3.acc_len = 0;
 		first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
-		first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+
+		/* Check FC Header to see what TYPE of frame we are rcv'ing */
+		if (sli4_type_from_fc_hdr(fc_hdr) == FC_TYPE_ELS) {
+			first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_ELS64_CX;
+			first_iocbq->iocb.un.rcvels.parmRo =
+				sli4_did_from_fc_hdr(fc_hdr);
+			first_iocbq->iocb.ulpPU = PARM_NPIV_DID;
+		} else
+			first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
 		first_iocbq->iocb.ulpContext = NO_XRI;
 		first_iocbq->iocb.unsli3.rcvsli3.ox_id =
 			be16_to_cpu(fc_hdr->fh_ox_id);
@@ -14304,6 +14335,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
 	struct fc_frame_header *fc_hdr;
 	struct lpfc_vport *vport;
 	uint32_t fcfi;
+	uint32_t did;
 
 	/* Process each received buffer */
 	fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
@@ -14319,12 +14351,32 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
 	else
 		fcfi = bf_get(lpfc_rcqe_fcf_id,
 			      &dmabuf->cq_event.cqe.rcqe_cmpl);
+
 	vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
-	if (!vport || !(vport->vpi_state & LPFC_VPI_REGISTERED)) {
+	if (!vport) {
 		/* throw out the frame */
 		lpfc_in_buf_free(phba, &dmabuf->dbuf);
 		return;
 	}
+
+	/* d_id this frame is directed to */
+	did = sli4_did_from_fc_hdr(fc_hdr);
+
+	/* vport is registered unless we rcv a FLOGI directed to Fabric_DID */
+	if (!(vport->vpi_state & LPFC_VPI_REGISTERED) &&
+		(did != Fabric_DID)) {
+		/*
+		 * Throw out the frame if we are not pt2pt.
+		 * The pt2pt protocol allows for discovery frames
+		 * to be received without a registered VPI.
+		 */
+		if (!(vport->fc_flag & FC_PT2PT) ||
+			(phba->link_state == LPFC_HBA_READY)) {
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			return;
+		}
+	}
+
 	/* Handle the basic abort sequence (BA_ABTS) event */
 	if (fc_hdr->fh_r_ctl == FC_RCTL_BA_ABTS) {
 		lpfc_sli4_handle_unsol_abort(vport, dmabuf);

drivers/scsi/lpfc/lpfc_sli4.h

@@ -75,11 +75,19 @@
 	 (fc_hdr)->fh_s_id[1] <<  8 | \
 	 (fc_hdr)->fh_s_id[2])
 
+#define sli4_did_from_fc_hdr(fc_hdr)  \
+	((fc_hdr)->fh_d_id[0] << 16 | \
+	 (fc_hdr)->fh_d_id[1] <<  8 | \
+	 (fc_hdr)->fh_d_id[2])
+
 #define sli4_fctl_from_fc_hdr(fc_hdr)  \
 	((fc_hdr)->fh_f_ctl[0] << 16 | \
 	 (fc_hdr)->fh_f_ctl[1] <<  8 | \
 	 (fc_hdr)->fh_f_ctl[2])
 
+#define sli4_type_from_fc_hdr(fc_hdr)  \
+	((fc_hdr)->fh_type)
+
 #define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
 
 enum lpfc_sli4_queue_type {