Commit 93d087f8 authored by Jacopo Mondi's avatar Jacopo Mondi Committed by Mauro Carvalho Chehab

media: dt-bindings: media: ov5647: Convert to json-schema

Convert the ov5647 image sensor bindings to DT schema and add
the file entry to MAINTAINERS.
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent da6264ba
Omnivision OV5647 raw image sensor
---------------------------------
OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
and CCI (I2C compatible) control bus.
Required properties:
- compatible : "ovti,ov5647".
- reg : I2C slave address of the sensor.
- clocks : Reference to the xclk clock.
The common video interfaces bindings (see video-interfaces.txt) should be
used to specify link to the image data receiver. The OV5647 device
node should contain one 'port' child node with an 'endpoint' subnode.
Endpoint node mandatory properties:
- remote-endpoint: A phandle to the bus receiver's endpoint node.
Example:
i2c@2000 {
...
ov: camera@36 {
compatible = "ovti,ov5647";
reg = <0x36>;
clocks = <&camera_clk>;
port {
camera_1: endpoint {
remote-endpoint = <&csi1_ep1>;
};
};
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Omnivision OV5647 raw image sensor
maintainers:
- Dave Stevenson <dave.stevenson@raspberrypi.com>
- Jacopo Mondi <jacopo@jmondi.org>
description: |-
The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
interfaces and CCI (I2C compatible) control bus.
properties:
compatible:
const: ovti,ov5647
reg:
description: I2C device address.
maxItems: 1
clocks:
description: Reference to the xclk clock.
maxItems: 1
port:
type: object
description: |-
Should contain one endpoint sub-node used to model connection to the
video receiver according to the specification defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
properties:
endpoint:
type: object
properties:
remote-endpoint:
description: |-
phandle to the video receiver input port.
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- clocks
- port
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
ov5647: camera@36 {
compatible = "ovti,ov5647";
reg = <0x36>;
clocks = <&camera_clk>;
port {
camera_out: endpoint {
remote-endpoint = <&csi1_ep1>;
};
};
};
};
...
......@@ -12761,6 +12761,7 @@ M: Luis Oliveira <lolivei@synopsys.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/ov5647.yaml
F: drivers/media/i2c/ov5647.c
OMNIVISION OV5670 SENSOR DRIVER
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment