PCI: Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask

Bit 7 of the "Header Type" register indicates a multi-function device when
set.  Bits 0-6 contain encoded values, where 0x1 indicates a PCI-PCI
bridge.  It is incorrect to test this as though it were a mask.

For example, while the PCI 3.0 spec only defines values 0x0, 0x1, and 0x2,
it's conceivable that a future spec could define 0x3 to mean something
else; then tests for "(hdr_type & 0x7f) & PCI_HEADER_TYPE_BRIDGE" would
incorrectly succeed for this new 0x3 header type.

Test bits 0-6 of the Header Type for equality with PCI_HEADER_TYPE_BRIDGE.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

arch/powerpc/kernel/eeh_driver.c

@@ -400,7 +400,7 @@ static void *eeh_rmv_device(void *data, void *userdata)
 	 * support EEH. So we just care about PCI devices for
 	 * simplicity here.
 	 */
-	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+	if (!dev || (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE))
 		return NULL;
 
 	/*

drivers/pci/hotplug/ibmphp_pci.c

@@ -1119,7 +1119,7 @@ static struct res_needed *scan_behind_bridge (struct pci_func *func, u8 busno)
 				pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
 
 				debug ("hdr_type behind the bridge is %x\n", hdr_type);
-				if (hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+				if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
 					err ("embedded bridges not supported for hot-plugging.\n");
 					amount->not_correct = 1;
 					return amount;

drivers/pci/pcie/aer/aerdrv_core.c

@@ -246,7 +246,7 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->error_detected) {
 		if (result_data->state == pci_channel_io_frozen &&
-			!(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) {
+			dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
 			/*
 			 * In case of fatal recovery, if one of down-
 			 * stream device has no driver. We might be
@@ -269,7 +269,7 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 		 * without recovery.
 		 */
 
-		if (!(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
 			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
 		else
 			vote = PCI_ERS_RESULT_NONE;
@@ -369,7 +369,7 @@ static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
 	else
 		result_data.result = PCI_ERS_RESULT_RECOVERED;
 
-	if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		/*
 		 * If the error is reported by a bridge, we think this error
 		 * is related to the downstream link of the bridge, so we
@@ -440,7 +440,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver;
 
-	if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		/* Reset this port for all subordinates */
 		udev = dev;
 	} else {
@@ -660,7 +660,7 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 			&info->mask);
 		if (!(info->status & ~info->mask))
 			return 0;
-	} else if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE ||
+	} else if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 		info->severity == AER_NONFATAL) {
 
 		/* Link is still healthy for IO reads */