Commit 941071f4 authored by David S. Miller's avatar David S. Miller

[SPARC64]: Update defconfig.

parent e232cae5
......@@ -12,10 +12,16 @@ CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_LOG_BUF_SHIFT_17 is not set
# CONFIG_LOG_BUF_SHIFT_16 is not set
CONFIG_LOG_BUF_SHIFT_15=y
# CONFIG_LOG_BUF_SHIFT_14 is not set
# CONFIG_LOG_BUF_SHIFT_13 is not set
# CONFIG_LOG_BUF_SHIFT_12 is not set
CONFIG_LOG_BUF_SHIFT=15
#
# Loadable module support
......@@ -23,6 +29,7 @@ CONFIG_SYSCTL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
......@@ -47,6 +54,7 @@ CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_RTC=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_KCORE_ELF=y
......@@ -76,45 +84,17 @@ CONFIG_WATCHDOG_CP1XXX=m
CONFIG_WATCHDOG_RIO=m
#
# Console drivers
# Graphics support
#
CONFIG_PROM_CONSOLE=y
# CONFIG_FB is not set
#
# Frame-buffer support
# Console display driver support
#
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_BWTWO is not set
# CONFIG_FB_CGTHREE is not set
CONFIG_FB_CGSIX=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_ATY_CT=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_SBUS=y
CONFIG_FB_CREATOR=y
# CONFIG_FB_LEO is not set
CONFIG_FB_PCI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_ACCEL=y
CONFIG_FBCON_FONTWIDTH8_ONLY=y
CONFIG_FONT_SUN8x16=y
# CONFIG_FBCON_FONTS is not set
#
# Serial drivers
......@@ -260,7 +240,11 @@ CONFIG_SCSI_QLOGICPTI=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT=y
CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8
......@@ -305,6 +289,11 @@ CONFIG_FUSION_LAN=m
#
# CONFIG_IEEE1394 is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
......@@ -387,10 +376,6 @@ CONFIG_NET_CLS_POLICE=y
# Network testing
#
CONFIG_NET_PKTGEN=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
......@@ -414,8 +399,6 @@ CONFIG_SUNQE=m
CONFIG_SUNGEM=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
......@@ -431,6 +414,7 @@ CONFIG_WINBOND_840=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_DGRS=m
......@@ -452,7 +436,6 @@ CONFIG_SUNDANCE_MMIO=y
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
......@@ -819,7 +802,10 @@ CONFIG_USB_UHCI_HCD=m
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
CONFIG_USB_BLUETOOTH_TTY=m
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
......@@ -910,6 +896,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
......@@ -992,6 +979,7 @@ CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_TEST is not set
#
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment