Skip to content

L
linux
Commit 94155cf4 authored by Mike Thomas's avatar Mike Thomas Committed by Greg Kroah-Hartman
Browse files
Options

staging/easycap: Add option to set the hardware audio gain 

A new module parameter adjusts the gain of the AC'97 audio chip, if
one is present.  Attenuation as well as amplification should be possible
according to the datasheet, but attenuation seems not to work yet.
Signed-off-by: default avatarMike Thomas <rmthomas@sciolus.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 849322a0
Hide whitespace changes
Inline Side-by-side
Showing with 96 additions and 47 deletions
drivers/staging/easycap/easycap_debug.h
View file @ 94155cf4
......@@ -25,3 +25,4 @@
*/
/*****************************************************************************/
extern int debug;
extern int gain;
drivers/staging/easycap/easycap_ioctl.c
View file @ 94155cf4
......@@ -873,18 +873,26 @@ i1 = 0;
while (0xFFFFFFFF != easycap_control[i1].id) {
if (V4L2_CID_AUDIO_VOLUME == easycap_control[i1].id) {
if ((easycap_control[i1].minimum > value) || \
(easycap_control[i1].maximum < value))
(easycap_control[i1].maximum < value))
value = easycap_control[i1].default_value;
if ((easycap_control[i1].minimum <= peasycap->volume) && \
(easycap_control[i1].maximum >= \
peasycap->volume)) {
if (peasycap->volume == value) {
SAM("unchanged volume at 0x%02X\n", value);
return 0;
}
}
peasycap->volume = value;
mood = (16 > peasycap->volume) ? 16 : \
((31 < peasycap->volume) ? 31 : \
(__s8) peasycap->volume);
if (!audio_gainset(peasycap->pusb_device, mood)) {
SAM("adjusting volume to 0x%01X\n", mood);
SAM("adjusting volume to 0x%02X\n", mood);
return 0;
} else {
SAM("WARNING: failed to adjust volume to " \
"0x%1X\n", mood);
"0x%2X\n", mood);
return -ENOENT;
}
break;
......
drivers/staging/easycap/easycap_low.c
View file @ 94155cf4
......@@ -988,9 +988,9 @@ if (NULL == peasycap)
pusb_device = peasycap->pusb_device;
if (NULL == pusb_device)
return -EFAULT;
return -ENODEV;
JOT(8, "%02X %02X %02X %02X %02X %02X %02X %02X\n", \
JOM(8, "%02X %02X %02X %02X %02X %02X %02X %02X\n", \
requesttype, request, \
(0x00FF & value_unmute), \
(0xFF00 & value_unmute) >> 8, \
......@@ -1029,41 +1029,25 @@ if (rc != (int)length)
* THE UPPER BYTE SEEMS TO HAVE NO EFFECT.
*/
/*--------------------------------------------------------------------------*/
SET(pusb_device, 0x0500, 0x0094);
SET(pusb_device, 0x0500, 0x008C);
SET(pusb_device, 0x0506, 0x0001);
SET(pusb_device, 0x0507, 0x0000);
id1 = read_vt(pusb_device, 0x007C);
id2 = read_vt(pusb_device, 0x007E);
SAY("0x%04X:0x%04X is audio vendor id\n", id1, id2);
SAM("0x%04X:0x%04X is audio vendor id\n", id1, id2);
/*---------------------------------------------------------------------------*/
/*
* SELECT AUDIO SOURCE "LINE IN" AND SET DEFAULT GAIN TO 0 dB.
*
* THESE COMMANDS SEEM TO BE ACCEPTED (THOUGH POSSIBLY IGNORED) EVEN WHEN
* THERE IS NO SEPARATE AUDIO CHIP PRESENT.
* SELECT AUDIO SOURCE "LINE IN" AND SET THE AUDIO GAIN.
*/
/*---------------------------------------------------------------------------*/
write_vt(pusb_device, 0x0002, 0x8000);
write_vt(pusb_device, 0x001C, 0x8000);
write_vt(pusb_device, 0x000E, 0x0000);
write_vt(pusb_device, 0x0010, 0x0000);
write_vt(pusb_device, 0x0012, 0x8000);
write_vt(pusb_device, 0x0016, 0x0000);
write_vt(pusb_device, 0x001A, 0x0404);
write_vt(pusb_device, 0x0002, 0x0000);
write_vt(pusb_device, 0x001C, 0x0000);
if (31 < gain)
gain = 31;
if (0 > gain)
gain = 0;
if (0 != audio_gainset(pusb_device, (__s8)gain))
SAY("ERROR: audio_gainset() failed\n");
check_vt(pusb_device);
return 0;
}
/*****************************************************************************/
......@@ -1096,17 +1080,23 @@ if (0 > igot)
if (0x8000 & igot)
SAY("register 0x%02X muted\n", 0x12);
igot = read_vt(pusb_device, 0x0014);
if (0 > igot)
SAY("ERROR: failed to read VT1612A register 0x14\n");
if (0x8000 & igot)
SAY("register 0x%02X muted\n", 0x14);
igot = read_vt(pusb_device, 0x0016);
if (0 > igot)
SAY("ERROR: failed to read VT1612A register 0x16\n");
if (0x8000 & igot)
SAY("register 0x%02X muted\n", 0x16);
igot = read_vt(pusb_device, 0x001A);
igot = read_vt(pusb_device, 0x0018);
if (0 > igot)
SAY("ERROR: failed to read VT1612A register 0x1A\n");
SAY("ERROR: failed to read VT1612A register 0x18\n");
if (0x8000 & igot)
SAY("register 0x%02X muted\n", 0x1A);
SAY("register 0x%02X muted\n", 0x18);
igot = read_vt(pusb_device, 0x001C);
if (0 > igot)
......@@ -1118,14 +1108,18 @@ return 0;
}
/*****************************************************************************/
/*---------------------------------------------------------------------------*/
/*
* NOTE: THIS DOES INCREASE THE VOLUME DRAMATICALLY:
* audio_gainset(pusb_device, 0x000F);
/* NOTE: THIS DOES INCREASE THE VOLUME DRAMATICALLY:
* audio_gainset(pusb_device, 0x000F);
*
* IF 16<loud<31 VT1621A REGISTER 0x1C IS SET FOR POSITIVE GAIN.
* IF loud<=16 VT1621A REGISTER 0x1C IS SET FOR ZERO GAIN.
* THERE IS NEVER ANY (ADDITIONAL) ATTENUATION.
*/
* loud dB register 0x10 dB register 0x1C dB total
* 0 -34.5 0 -34.5
* .. .... . ....
* 15 10.5 0 10.5
* 16 12.0 0 12.0
* 17 12.0 1.5 13.5
* .. .... .... ....
* 31 12.0 22.5 34.5
*/
/*---------------------------------------------------------------------------*/
int
audio_gainset(struct usb_device *pusb_device, __s8 loud)
......@@ -1134,25 +1128,65 @@ int igot;
__u8 u8;
__u16 mute;
if (16 > loud)
loud = 16;
u8 = 0x000F & (__u8)(loud - 16);
if ((struct usb_device *)NULL == pusb_device)
return -ENODEV;
if (0 > loud)
loud = 0;
if (31 < loud)
loud = 31;
write_vt(pusb_device, 0x0002, 0x8000);
/*---------------------------------------------------------------------------*/
igot = read_vt(pusb_device, 0x000E);
if (0 > igot) {
SAY("ERROR: failed to read VT1612A register 0x0E\n");
mute = 0x0000;
} else
mute = 0x8000 & ((unsigned int)igot);
mute = 0;
if (16 > loud)
u8 = 0x01 | (0x001F & (((__u8)(15 - loud)) << 1));
else
u8 = 0;
JOT(8, "0x%04X=(mute|u8) for VT1612A register 0x0E\n", mute | u8);
write_vt(pusb_device, 0x000E, (mute | u8));
/*---------------------------------------------------------------------------*/
igot = read_vt(pusb_device, 0x0010);
if (0 > igot) {
SAY("ERROR: failed to read VT1612A register 0x10\n");
mute = 0x0000;
} else
mute = 0x8000 & ((unsigned int)igot);
mute = 0;
JOT(8, "0x%04X=(mute|u8|(u8<<8)) for VT1612A register 0x10,...0x18\n", \
mute | u8 | (u8 << 8));
write_vt(pusb_device, 0x0010, (mute | u8 | (u8 << 8)));
write_vt(pusb_device, 0x0012, (mute | u8 | (u8 << 8)));
write_vt(pusb_device, 0x0014, (mute | u8 | (u8 << 8)));
write_vt(pusb_device, 0x0016, (mute | u8 | (u8 << 8)));
write_vt(pusb_device, 0x0018, (mute | u8 | (u8 << 8)));
/*---------------------------------------------------------------------------*/
igot = read_vt(pusb_device, 0x001C);
if (0 > igot) {
SAY("ERROR: failed to read VT1612A register 0x1C\n");
mute = 0x0000;
} else
mute = 0x8000 & ((unsigned int)igot);
mute = 0;
JOT(8, "0x%04X=(mute|u8|(u8<<8))\n", mute | u8 | (u8 << 8));
if (16 <= loud)
u8 = 0x000F & (__u8)(loud - 16);
else
u8 = 0;
write_vt(pusb_device, 0x001C, 0x8000);
JOT(8, "0x%04X=(mute|u8|(u8<<8)) for VT1612A register 0x1C\n", \
mute | u8 | (u8 << 8));
write_vt(pusb_device, 0x001C, (mute | u8 | (u8 << 8)));
write_vt(pusb_device, 0x001A, 0x0404);
write_vt(pusb_device, 0x0002, 0x0000);
return 0;
}
/*****************************************************************************/
......@@ -1161,6 +1195,8 @@ audio_gainget(struct usb_device *pusb_device)
{
int igot;
if (NULL == pusb_device)
return -ENODEV;
igot = read_vt(pusb_device, 0x001C);
if (0 > igot)
SAY("ERROR: failed to read VT1612A register 0x1C\n");
......
drivers/staging/easycap/easycap_main.c
View file @ 94155cf4
......@@ -34,8 +34,10 @@
int debug;
int bars;
int gain = 16;
module_param(debug, int, S_IRUGO | S_IWUSR);
module_param(bars, int, S_IRUGO | S_IWUSR);
module_param(gain, int, S_IRUGO | S_IWUSR);
/*---------------------------------------------------------------------------*/
/*
......@@ -4770,7 +4772,8 @@ easycap_module_init(void)
int result;
SAY("========easycap=======\n");
JOT(4, "begins. %i=debug %i=bars\n", debug, bars);
JOT(4, "begins. %i=debug %i=bars %i=gain\n", debug, bars, \
gain);
SAY("version: " EASYCAP_DRIVER_VERSION "\n");
/*---------------------------------------------------------------------------*/
/*
......@@ -4811,8 +4814,9 @@ MODULE_AUTHOR("R.M. Thomas <rmthomas@sciolus.org>");
MODULE_DESCRIPTION(EASYCAP_DRIVER_DESCRIPTION);
MODULE_VERSION(EASYCAP_DRIVER_VERSION);
#if defined(EASYCAP_DEBUG)
MODULE_PARM_DESC(debug, "Debug level: 0 (default),1,2,...,9");
MODULE_PARM_DESC(debug, "Debug level: 0 (default),1,2,...");
#endif /*EASYCAP_DEBUG*/
MODULE_PARM_DESC(bars, \
"Testcard bars on input signal failure: 0=>no, 1=>yes(default)");
MODULE_PARM_DESC(gain, "Audio gain: 0,...,16(default),...31");
/*****************************************************************************/
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7