Commit 949ccc3a authored by Mateusz Krawczuk's avatar Mateusz Krawczuk Committed by Kukjin Kim

phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver

Add support for the Samsung's S5PV210 SoC to the Exynos USB 2.0 PHY driver.
Signed-off-by: default avatarMateusz Krawczuk <m.krawczuk@partner.samsung.com>
[k.debski@samsung.com: cleanup and commit description]
[k.debski@samsung.com: make changes accordingly to the mailing list
comments]
Signed-off-by: default avatarKamil Debski <k.debski@samsung.com>
Signed-off-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 9978f28f
......@@ -26,6 +26,7 @@ Samsung S5P/EXYNOS SoC series USB PHY
Required properties:
- compatible : should be one of the listed compatibles:
- "samsung,s5pv210-usb2-phy"
- "samsung,exynos4210-usb2-phy"
- "samsung,exynos4x12-usb2-phy"
- "samsung,exynos5250-usb2-phy"
......
......@@ -132,6 +132,16 @@ config PHY_SAMSUNG_USB2
particular SoCs has to be enabled in addition to this driver. Number
and type of supported phys depends on the SoC.
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
depends on ARCH_S5PV210
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
particular SoC is compiled in the driver. In case of S5PV210 two phys
are available - device and host.
config PHY_EXYNOS4210_USB2
bool "Support for Exynos 4210"
depends on PHY_SAMSUNG_USB2
......
......@@ -18,5 +18,6 @@ phy-exynos-usb2-y += phy-samsung-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
/*
* Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Authors: Kamil Debski <k.debski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include "phy-samsung-usb2.h"
/* Exynos USB PHY registers */
/* PHY power control */
#define S5PV210_UPHYPWR 0x0
#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0)
#define S5PV210_UPHYPWR_PHY0_PWR BIT(3)
#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4)
#define S5PV210_UPHYPWR_PHY0 ( \
S5PV210_UPHYPWR_PHY0_SUSPEND | \
S5PV210_UPHYPWR_PHY0_PWR | \
S5PV210_UPHYPWR_PHY0_OTG_PWR)
#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6)
#define S5PV210_UPHYPWR_PHY1_PWR BIT(7)
#define S5PV210_UPHYPWR_PHY1 ( \
S5PV210_UPHYPWR_PHY1_SUSPEND | \
S5PV210_UPHYPWR_PHY1_PWR)
/* PHY clock control */
#define S5PV210_UPHYCLK 0x4
#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4)
#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7)
/* PHY reset control */
#define S5PV210_UPHYRST 0x8
#define S5PV210_URSTCON_PHY0 BIT(0)
#define S5PV210_URSTCON_OTG_HLINK BIT(1)
#define S5PV210_URSTCON_OTG_PHYLINK BIT(2)
#define S5PV210_URSTCON_PHY1_ALL BIT(3)
#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4)
/* Isolation, configured in the power management unit */
#define S5PV210_USB_ISOL_OFFSET 0x680c
#define S5PV210_USB_ISOL_DEVICE BIT(0)
#define S5PV210_USB_ISOL_HOST BIT(1)
enum s5pv210_phy_id {
S5PV210_DEVICE,
S5PV210_HOST,
S5PV210_NUM_PHYS,
};
/*
* s5pv210_rate_to_clk() converts the supplied clock rate to the value that
* can be written to the phy register.
*/
static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg)
{
switch (rate) {
case 12 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
break;
case 24 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
break;
case 48 * MHZ:
*reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
break;
default:
return -EINVAL;
}
return 0;
}
static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 mask;
switch (inst->cfg->id) {
case S5PV210_DEVICE:
mask = S5PV210_USB_ISOL_DEVICE;
break;
case S5PV210_HOST:
mask = S5PV210_USB_ISOL_HOST;
break;
default:
return;
};
regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET,
mask, on ? 0 : mask);
}
static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
{
struct samsung_usb2_phy_driver *drv = inst->drv;
u32 rstbits = 0;
u32 phypwr = 0;
u32 rst;
u32 pwr;
switch (inst->cfg->id) {
case S5PV210_DEVICE:
phypwr = S5PV210_UPHYPWR_PHY0;
rstbits = S5PV210_URSTCON_PHY0;
break;
case S5PV210_HOST:
phypwr = S5PV210_UPHYPWR_PHY1;
rstbits = S5PV210_URSTCON_PHY1_ALL |
S5PV210_URSTCON_HOST_LINK_ALL;
break;
};
if (on) {
writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK);
pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
pwr &= ~phypwr;
writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
rst = readl(drv->reg_phy + S5PV210_UPHYRST);
rst |= rstbits;
writel(rst, drv->reg_phy + S5PV210_UPHYRST);
udelay(10);
rst &= ~rstbits;
writel(rst, drv->reg_phy + S5PV210_UPHYRST);
} else {
pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
pwr |= phypwr;
writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
}
}
static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst)
{
s5pv210_isol(inst, 0);
s5pv210_phy_pwr(inst, 1);
return 0;
}
static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst)
{
s5pv210_phy_pwr(inst, 0);
s5pv210_isol(inst, 1);
return 0;
}
static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = {
[S5PV210_DEVICE] = {
.label = "device",
.id = S5PV210_DEVICE,
.power_on = s5pv210_power_on,
.power_off = s5pv210_power_off,
},
[S5PV210_HOST] = {
.label = "host",
.id = S5PV210_HOST,
.power_on = s5pv210_power_on,
.power_off = s5pv210_power_off,
},
};
const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = {
.num_phys = ARRAY_SIZE(s5pv210_phys),
.phys = s5pv210_phys,
.rate_to_clk = s5pv210_rate_to_clk,
};
......@@ -87,6 +87,12 @@ static struct phy *samsung_usb2_phy_xlate(struct device *dev,
}
static const struct of_device_id samsung_usb2_phy_of_match[] = {
#ifdef CONFIG_PHY_S5PV210_USB2
{
.compatible = "samsung,s5pv210-usb2-phy",
.data = &s5pv210_usb2_phy_config,
},
#endif
#ifdef CONFIG_PHY_EXYNOS4210_USB2
{
.compatible = "samsung,exynos4210-usb2-phy",
......
......@@ -61,6 +61,7 @@ struct samsung_usb2_phy_config {
bool has_mode_switch;
};
extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config;
extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment